Top Sellers
Automatic Inflatable Rearming Kit for Mustang 3031/3032 from MUSTANG
Mustang Re-Arm Kit for Models: MD3031, MD3032, MD3001, MD3002 & MD3095 The Automatic Inflatable Re-Arm Kit contains everything necessary to re-arm your Mustang Automatic Inflatables after deployment. Contains: one 33gram CO2 cylinder, one green inflator pin one bobbin, one re-arming instruction manual. For model numbers: MD3001 - MD3002 - MD3031 - 6F Classic PFD Automatic MD3032 - 6F Classic PFD Automatic with Harness. Regular maintenance can reduce the possibility of premature inflation.
|
Oil Filter - OMC Johnson/Evinrude, Suzuki from SIERRA
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
|
Solenoid 18-5817D, Curved Bracket replaces Mercury P/N 89-96158T from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Replaces Mercury P/N 89-850188T1, 89-818999A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
|
|
Rearming Kit for Rescue Stick from MUSTANG
Rearming Kit for Throwable Rescue Stick Incredibly easy to use, the Rescue Stick™ provides fast flotation assistance to a person at risk of drowning. Just remove the baton-shaped Rescue Stick from its protective container and throw near the victim. Once contact is made with the water it inflates in seconds to a large horseshoe shape, keeping the victim afloat and their head above water until help arrives. Anyone who can throw a stick can throw Rescue Stick to someone in distress in the water.
|
Integrity Life Vest, Child from MUSTANG
Child's PFD lets kids play freely while staying safe This vest features innovations that raise the bar in comfort and mobility. It's ideal for the active child and is designed to be comfortable in hot weather. Flexible, High-Performance(tm) Nylon covers the unique 3D-shaped AirSoft(tm) foam that won't interfere with movement and does not ride up. Lie-flat head collar with grab strap won't impede your child's view or activity, and the collar is lined with neoprene for extra comfort.
|
Rubrail Insert - for Style #6, Model 341100 from TACO PRODUCTS
Rubber inserts add cushioning to your aluminum rubrails. . These fit styles #5, #6 and #7. Rub rails and inserts sold separately. .
|
Rub Rail Style #2, 1-7/8"H x 1-1/16"W x 50'L, Black/Black RR/Insert Color from TACO PRODUCTS
Excellent universal rub rail fits many different boat models. Flexible vinyl rub rail is easy to bend and provides a soft cushioning effect against normal bumps from pilings and docks. It’s easy to install using basic tools and comes in a continuous coil for seamless application. Includes rub rail (in a continuous coil for one-piece installation without seams) insert, end caps, screws (matching for colored rub rail) and installation guide. Installation DVD included.
|
Rubrail Insert - for Style #5, Model 408164 from TACO PRODUCTS
Rubber inserts add cushioning to your aluminum rubrails. . These fit styles #5, #6 and #7. Rub rails and inserts sold separately. .
|
10 Micron Replacement Filter Element for Yamaha EFI/DFI MAR-FUELF-IL-TR, 90gph from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
18-1952-1 Manifold, MerCruiser, 99746A8, 65604A4 from SIERRA
Sierra exhaust manifolds, risers and elbows are 100% painted where the competition sends theirs out in primer alone. When the technician buys a manifold from us, time spent watching paint dry is saved for other profit generating work. Manifolds, risers and elbows are individually packaged in Instapack, an expanding packaging foam that keeps the part from chipping and breaking during transportation Water left in manifolds over the winter months can freeze and crack requiring replacement.
|
Water Circulating Pump - #18-3583 - Volvo # 3853850, 835390-6, 856364-5; Crusader #7142520; Mercruiser # 17437, 60658, 850399-1, OMC #980477, 985429; Pleasurecraft # RA057018 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
|
Insert from SIERRA, Yellow from MUSTANG, Red from MUSTANG
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.
Part No: 13002:01
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Air Arch Inflatable Boom Tents
Rain, hail or shine. the new Ronstan Inflatable Boom Tent will keep you protected from the elements. The range includes four size options, to cater for yachts from 25ft. (7. 5m to 14m). The Inflatable Boom Tent has a unique arch shape courtesy of inflatable struts, maximizing the available cockpit space compared to normal boom tents. Made for durability with heavy-duty UV-resistant acrylic and water repellent rip-stop nylon. Light and compact. Unique arch shape provides more cockpit space.
Part No: RF3925-30
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Air Arch Inflatable Boom Tents
Rain, hail or shine. the new Ronstan Inflatable Boom Tent will keep you protected from the elements. The range includes four size options, to cater for yachts from 25ft. (7. 5m to 14m). The Inflatable Boom Tent has a unique arch shape courtesy of inflatable struts, maximizing the available cockpit space compared to normal boom tents. Made for durability with heavy-duty UV-resistant acrylic and water repellent rip-stop nylon. Light and compact. Unique arch shape provides more cockpit space.
Part No: RF3930-35
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Air Arch Inflatable Boom Tents
Rain, hail or shine. the new Ronstan Inflatable Boom Tent will keep you protected from the elements. The range includes four size options, to cater for yachts from 25ft. (7. 5m to 14m). The Inflatable Boom Tent has a unique arch shape courtesy of inflatable struts, maximizing the available cockpit space compared to normal boom tents. Made for durability with heavy-duty UV-resistant acrylic and water repellent rip-stop nylon. Light and compact. Unique arch shape provides more cockpit space.
Part No: RF3935-40
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Air Arch Inflatable Boom Tents
Rain, hail or shine. the new Ronstan Inflatable Boom Tent will keep you protected from the elements. The range includes four size options, to cater for yachts from 25ft. (7. 5m to 14m). The Inflatable Boom Tent has a unique arch shape courtesy of inflatable struts, maximizing the available cockpit space compared to normal boom tents. Made for durability with heavy-duty UV-resistant acrylic and water repellent rip-stop nylon. Light and compact. Unique arch shape provides more cockpit space.
Part No: RF3940-45
|
|
|
|
Home -> Safety -> Life Jackets->Offshore Inflatable Life Vest with LIFT & Auto Hydrostatic Inflator
Offering state-of-the-art inflatable technology, this vest’s hydrostatic inflator must be submerged in 4" of water for the PFD to automatically inflate, eliminating the chances of accidental inflation. of buoyancy and up to 9" of freeboard, one of the highest elevations out of water ever seen in a PFD. Inflator replacement date and inflator status are easily viewed through the safety inspection window—green indicates ready for use. Comfortable neoprene collar, cool mesh back.
Part No: MD0451-RD/BK
|
|
|
|
Home -> Safety -> Life Jackets->Offshore Inflatable Life Vest with LIFT & Auto Hydrostatic Inflator
Offering state-of-the-art inflatable technology, this vest’s hydrostatic inflator must be submerged in 4" of water for the PFD to automatically inflate, eliminating the chances of accidental inflation. of buoyancy and up to 9" of freeboard, one of the highest elevations out of water ever seen in a PFD. Inflator replacement date and inflator status are easily viewed through the safety inspection window—green indicates ready for use. Comfortable neoprene collar, cool mesh back.
Part No: MD0450
|
|
|
|
Home -> Safety -> Life Jackets -> Commercial Life Jackets->Commercial Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .
Part No: 1470BLK-00-000
|
|
|
|
Home -> Safety -> Life Jackets -> Commercial Life Jackets->Commercial Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .
Part No: 1470ORG-00-000
|
|
|
|
Home -> Safety -> Life Jackets->Offshore Power Auto/Manual Inflatable Life Vest
The versatile inflator can be armed for automatic or manual inflation. Its fleece-lined collar keeps the vest from chafing the back of your neck. A clear window on the outside of the cover allows for fast inspection: green means its ready for use, red means it requires rearming. Comes equipped with a quick-release Delrin buckle, 2"W nylon webbing, front zip pocket, SOLAS-grade reflective tape, back-up oral inflation tube and arming cylinder with pill. Buoyancy: 33. 7lb. .
Part No: 1493NAV-00-WMP
|
|
|
|
Home -> Safety -> Life Jackets->Offshore Power Auto/Manual Inflatable Life Vest
The versatile inflator can be armed for automatic or manual inflation. Its fleece-lined collar keeps the vest from chafing the back of your neck. A clear window on the outside of the cover allows for fast inspection: green means its ready for use, red means it requires rearming. Comes equipped with a quick-release Delrin buckle, 2"W nylon webbing, front zip pocket, SOLAS-grade reflective tape, back-up oral inflation tube and arming cylinder with pill. Buoyancy: 33. 7lb. .
Part No: 1493YEL-00-WMP
|
|
|
|
Home -> Safety -> Man Overboard Gear
Inflatable marker pole helps rescue overboard crew membersReplace bulky crew-overboard poles with this compact inflatable rescue device. In a crew-overboard emergency, simply throw the canister toward the victim and the pole and buoy will inflate when the lanyard is fully tensioned. Buoy reaches 5'9" above the water. Canister measures 19"H x 5"dia. . Also includes drogue, water-activated light, red and yellow flag, reflective tape and backup oral inflation.
Part No: 40203
|
|
|
|
Home -> Safety -> Life Jackets -> Recreational Life Jackets
The Hydrostatic Inflator Technology offers reliable inflation in a low maintenance design that will only automatically inflate when submerged in 4 or more inches of water and not inadvertantly due to rain, spray or humidity. Exclusive to Mustang Survival in North America and maintenance-free for 5 years or until inflated. It also features the patented SecureZip™ closure system to ensure the PFD will stay closed during even the most rigorous activity and still opens effortlessly upon inflation.
Part No: MD3154 BLK/CAR
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Inflatable Race Mark
On Your Marks, Get Set, Go! Fortunately, poorly marked regattas are a thing of the past. Our new private labeled inflatable tetrahedron racing markers are perfect for sailing clubs and junior programs. The highly visible pyramid shape assures stability, and being manufactured of durable PVC ensures durability. These markers inflate easily using an inflator pump (we recommend WM #5374111 or WM #5331475) or shop vac. Use the new West Marine inflatable racing markers. You’ll be glad you did. .
Part No: OIRM
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Inflatable Race Mark
On Your Marks, Get Set, Go! Fortunately, poorly marked regattas are a thing of the past. Our new private labeled inflatable tetrahedron racing markers are perfect for sailing clubs and junior programs. The highly visible pyramid shape assures stability, and being manufactured of durable PVC ensures durability. These markers inflate easily using an inflator pump (we recommend WM #5374111 or WM #5331475) or shop vac. Use the new West Marine inflatable racing markers. You’ll be glad you did. .
Part No: YIRM
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Fender Pumps
Compact, high-pressure hand pump for filling fenders, rafts, footballs, etc.
Part No: 31010
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Strong, mounts horizontally with four #6 screws (not included). . 1/2"W x 1 3/16"L. Mfr.
Part No: 227135
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
Raritan Marine Toilets Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance,. 1-800-BOATING (800-262-8464). Crown Head Exploded Parts. Crown Head II Exploded Parts. Atlantes Freedom Exploded Parts. Marine Elegance Owner's Manual. Compact II Exploded Parts.
Part No: 1204B
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
Raritan Marine Toilets Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance,. 1-800-BOATING (800-262-8464). Crown Head Exploded Parts. Crown Head II Exploded Parts. Atlantes Freedom Exploded Parts. Marine Elegance Owner's Manual. Compact II Exploded Parts.
Part No: 1203BW
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
Raritan Marine Toilets Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance,. 1-800-BOATING (800-262-8464). Crown Head Exploded Parts. Crown Head II Exploded Parts. Atlantes Freedom Exploded Parts. Marine Elegance Owner's Manual. Compact II Exploded Parts.
Part No: 1201
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Plastic Plumbing Fittings->Whale Water System Plumbing Fittings
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.
Part No: WX1582
|
|
|
|
Standard - ZR352 7 rods / ZR353 10 rods Our J-hook carriers use elastic retention bands for secure hold and quick loading, at a lower price than our high-end Pro models while still using the same high-end frame. The ultimate solution for transporting your rods away from the elements, out of sight, and away from other cargo and passenger space. Solid installation to car with no drilling. Frame adjusts to fit most vehicles. Front holder guides the rod tips away from both driver and passenger.
Part No: ZR353
|
|
|
|
Standard - ZR352 7 rods / ZR353 10 rods Our J-hook carriers use elastic retention bands for secure hold and quick loading, at a lower price than our high-end Pro models while still using the same high-end frame. The ultimate solution for transporting your rods away from the elements, out of sight, and away from other cargo and passenger space. Solid installation to car with no drilling. Frame adjusts to fit most vehicles. Front holder guides the rod tips away from both driver and passenger.
Part No: ZR352
|
|
|
|
Standard - ZR352 7 rods / ZR353 10 rods Our J-hook carriers use elastic retention bands for secure hold and quick loading, at a lower price than our high-end Pro models while still using the same high-end frame. The ultimate solution for transporting your rods away from the elements, out of sight, and away from other cargo and passenger space. Solid installation to car with no drilling. Frame adjusts to fit most vehicles. Front holder guides the rod tips away from both driver and passenger.
Part No: ZR356
|
|
|
|
Standard - ZR352 7 rods / ZR353 10 rods Our J-hook carriers use elastic retention bands for secure hold and quick loading, at a lower price than our high-end Pro models while still using the same high-end frame. The ultimate solution for transporting your rods away from the elements, out of sight, and away from other cargo and passenger space. Solid installation to car with no drilling. Frame adjusts to fit most vehicles. Front holder guides the rod tips away from both driver and passenger.
Part No: ZR355
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Black Rubber Rail Inserts
Rubber inserts add cushioning to your aluminum rubrails. . These fit styles #5, #6 and #7. Rub rails and inserts sold separately. .
Part No: V12-0303BKA50-1
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Insert Cup|**Insert Cup.
Part No: 18-3113
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Insert Cup|**Insert Cup.
Part No: 18-3115
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Insert Cup|**Insert Cup.
Part No: 18-3358
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Insert Cup|**Insert Cup.
Part No: 18-3449
|
|
|