Top Sellers
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
|
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
|
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Drill Pump Kit from JABSCO
The self-priming drill pump chucks into a standard 1/4" drill motor and pumps up to 3 1/2gpm. Kit includes all items needed for draining engine oil through the dipstick tube. Includes 3' of 1/2" hose, probe adapter and 40"L x 1/4"dia.
|
Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
|
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
|
Adjustable Packing Nut Wrench from SEAFIT
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
|
Removable Folding Pontoon Ladder from WINDLINE
Extremely sturdy four-step ladder is constructed of 1" dia. aluminum tubing with wide plastic steps. Integrated swim handles provide hand support. The ladder pops in and out of flush-mounted cups on the deck. Folds to about 4" thick for storage. Mounts on deck in the folded position. So lightweight it floats! Includes mounting cups and hardware. Mounting Style: Hook-Over-Gunwale. Material: Aluminum/Plastic. Number of Steps: 4. Stand-Off Depth: 6".
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
Spanner Wrench from GROCO
For use with Groco strainers and deck plates with holes up to 7" apart. Cast bronze with 1/4" dia. stainless steel pins on one side and 5/16" pins on the other. Made in USA.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
|
Double Powerclutch, 1" Bulb Dia, 3, Double Sheave, Double Swivel
|
|
Home -> Sailboat -> Cleats & Stoppers->XAS Powerclutches
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
Part No: XAS0612/2
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches->XAS Powerclutches
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
Part No: XAS0408/2
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Fender Racks
Stainless steel racks keep fenders organized and your deck clear. Built to last in the marine environment. Stainless U-bolt attachment fits 7/8" and 1" tubing.
Part No: WFEN8D
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Fender Racks
Stainless steel racks keep fenders organized and your deck clear. Built to last in the marine environment. Stainless U-bolt attachment fits 7/8" and 1" tubing.
Part No: WFEN10D
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Fender Racks
Stainless steel racks keep fenders organized and your deck clear. Built to last in the marine environment. Stainless U-bolt attachment fits 7/8" and 1" tubing.
Part No: WFEN6D
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->12V Flush Mount Receptacles & Plugs
Add up to three 12V receptacles all at once. Each receptacle has a weatherproof cap to protect the contacts from corrosion.
Part No: SC-3028-2P-B
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Folding Pad Eyes
Fold-down pad eyes stay out of the way until needed Essential deck hardware from Holt. Superior quality, forged stainless steel pad eyes fold down when not in use.
Part No: HT60010751/1
|
|
|
|
Home -> Sailboat -> Rigging Products->Clinometers
Properly damped, top-of-the-line clinometers. Durable polycarbonate construction. Each tube is built to rigorous standards, filled with a special damping fluid that controls the movement of the ball, providing the smoothest and most consistent roll.
Part No: 2056
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Control Blocks
Assemblies easily fasten to the track without additional holes in the boat. Bases and cam arms are machined from a single piece of aluminum for durability and a clean look. End control sheaves are 40mm Carbo blocks with free-running ball bearings to ensure cars adjust easily under load and release instantly in a gust. For angled cleating install the 380 X-treme Angle Fairlead. An integral dead-end terminates control lines. The 1661 or 1638 stand-up toggle holds blocks in a upright position.
Part No: 1632
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Control Blocks
Assemblies easily fasten to the track without additional holes in the boat. Bases and cam arms are machined from a single piece of aluminum for durability and a clean look. End control sheaves are 40mm Carbo blocks with free-running ball bearings to ensure cars adjust easily under load and release instantly in a gust. For angled cleating install the 380 X-treme Angle Fairlead. An integral dead-end terminates control lines. The 1661 or 1638 stand-up toggle holds blocks in a upright position.
Part No: 1633
|
|
|
|
Home -> Fishing -> Tackle Boxes & Lures -> Hard Tackle Boxes
This specialty box will repeatedly prove itself. Small and light, it will go anywhere! Split cover on one side affords increased access to needed gear. Keeps remaining gear safely enclosed while accessing other areas. Two removable dividers adjust to created from four to six compartments. Granite/Clear Blue. 4. 8"L x 3. 3"W x 1.
Part No: 1713-01
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> D & Headboard Shackles->Stainless-Steel Swivels
Approx. ShWt .
Part No: RF173
|
|
|
|
Home -> Fishing -> Fishing Accessories
Keeps tuna calm and alive longer! Tubes feature quick disconnect mounting brackets, for transom mounting are anodized then white powder coated for long life. Small transom mount nuts mount to transom, tuna tube brackets clip to nuts. Double's are 2 sets of brackets mounted together, only require 4 mounting nuts on transom. This Tuna Tube is white on the outside and black on the inside . Tube inside diameter is 8" x 26" long and will hold a tuna up to 20 pounds.
Part No: PFTT-80-2
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Non-corroding brass. Projects out 1 3/8'' from surface.
Part No: 371010
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Gear Organizers
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
Part No: RF3742
|
|
|
|
Home -> Sailboat -> Blocks->Rope/Wire Bullet Blocks
Designed for vangs, outhauls, shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Where applicable, blocks use #10 fasteners. Sheaves are aluminum for strength. Sheave: Teflon® impregnated Hardkote anodized aluminum . Bearings: Delrin® roller bearings . Sheave Size: 1-1/8" (29mm) . Line Dia. 5/16" max. . Cheek Material/Finish: Plastic with stainless strap .
Part No: 100
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches->XTS Powerclutches
Updated for performance with an advanced release mechanism, these clutches feature a concave/convex cam design for lines from 1/4" to 9/16". Extruded aluminum handles have a new soft end grip. Application: Identical footprint to XT series. Larger offshore and coastal racers and cruisers . Line Size: XTS0814: 5/16"–9/16"; XTS0608: 1/4"–5/16" . Height: 3-7/16" (85mm) . Fasteners: Two 5/16" (8mm) FHMS .
Part No: XTS0608/2
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches->XTS Powerclutches
Updated for performance with an advanced release mechanism, these clutches feature a concave/convex cam design for lines from 1/4" to 9/16". Extruded aluminum handles have a new soft end grip. Application: Identical footprint to XT series. Larger offshore and coastal racers and cruisers . Line Size: XTS0814: 5/16"–9/16"; XTS0608: 1/4"–5/16" . Height: 3-7/16" (85mm) . Fasteners: Two 5/16" (8mm) FHMS .
Part No: XTS0814/2
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
"Double action hand pump – to inflate all your toys quickly while on the water " Heavy-duty piston floor pump for towables and other large water toys. Special armored hose . Measures 15"H x 7 1/2"D . 10. 5 PSI. 8. 4 cu. ft. /min.
Part No: U185BLU-00-WMP
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Our double action piston pump can achieve this pressure while it also provides lots of volume for low pressure inflation of the rest of the boat. But how do you keep from, well, exploding your boat due to over-zealous pumping? That’s where its gauge comes to the rescue, which shows pressure in both pounds per square inch and in Bar. And since many boats list their inflation pressures in Bar, this is a very convenient feature. 4 cu ft per minute, which makes it among the fastest pumps we offer.
Part No: HHP-4
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
This patented safety hook has a twin trigger torsion gate that absolutely will not open unless the lever/grip and hook are squeezed simultaneously. The twin trigger is required by the European EN 362 rule for fall protection, is CE certified and meets ORC safety standards. Constructed of 304 stainless with a UV-resistant polymer lever/grip. Closed eye accommodates 1" webbing or 3/8" line. 4. 6"L. Gate opening: 3/4". MWL: 3,300lb.
Part No: 2454
|
|
|
|
Standard replacement light bulb used in many navigation lights.
Part No: 0337014DP
|
|
|
|
|
Standard replacement light bulb used in many navigation lights.
Part No: 0337011DP
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Halogen Socket Converters
Convert your existing light fixtures for use with 5W, 10W and 20W halogen lamps.
Part No: 99W 529381
|
|
|
|
.
Part No: 99W F61-1300
|
|
|
|
Home -> Sailboat -> Tiller & Rudder
Solid Teak Table Double-Leaf with Fitting Kit, unvarnished.
Part No: 89400283
|
|
|
|
Home -> Sailboat -> Tiller & Rudder
This cockpit table in solid teak, is available to suit all pedestal types and is supplied as standard with bracket, support and easy fitting instructions. When not in use, the table can be folded up against the forward edge of the pedestal secured with a bungee. Stowing and unclipping is easy with the quick release hinge pin.
Part No: 89400284
|
|
![Double-Pole Mounting Panel, 2-2/3"W x 3-3/4"H from BLUE SEA SYSTEMS]( "Double-Pole Mounting Panel, 2-2/3\"W x 3-3/4\"H from BLUE SEA SYSTEMS")
|
|
Home -> Electrical -> Meters & Distribution->A-Series Toggle Circuit Breaker Mounting Panel Double Pole
1/8" aluminum 5052 alloy Accepts Blue Sea Systems' Large Format Panel label.
Part No: 8173
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Anchor Line Accessories
Two-piece construction provides a finished appearance for cockpit and gunwale installation.
Part No: 66224-1
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Base-Mount White Masthead Navigation Light
Black plastic with stainless-steel mounting bracket . 12, 24 or 32 Volt bulbs included . Certified for use on sail or power-driven vessels under 20 meters (65. 6 ft. ) in length . Height Lens: 2-3/4" .
Part No: 0200MABDP1
|
|
|
