2-4-C Lube W/Teflon - Three 3.5 oz Grease Gun Cartridges from MERCURY MARINE
A high quality multi-purpose lubricant to withstand extreme friction and also improve water resistance.

Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .

Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .

G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.

Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.

Marine Whistle from WEST MARINE
Keep this powerful, rugged and reliable whistle attached to your PFD. Made for the marine environment, from noncorroding, high-impact plastic. No metal parts.

Life Jacket Organizer Bag from WEST MARINE
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).

Heavy Duty Grab Handle - Brass from WEST MARINE
6" x 3 3/8" with base diameters of 2 5/8".

Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .

Noise Reduction Seam Tape from WEST MARINE
The 3/32" flexible vinyl sheet is fused between two layers of foam—an exterior (“decoupler”) layer and an interior (“absorber”) layer. The exterior layer is then covered with a thin film (2. 5 mil) of mylar, reinforced with elastomer-coated fiberglass, for surface heat protection and enhanced sound absorption. The overall effect is a dramatic noise reduction when compared with single-layer foam barriers. Available in two overall thicknesses. Peel and stick backing for easy installation.

1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.

Covered Waterproof Foot Switch from WEST MARINE
Hinged safety cover closes over the switch to prevent accidental operation. 150A continuous rating. 4'' dia. Cutout: 2. 5'' dia.

Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.