Top Sellers
Dual Direction 12v Solenoid from LEWMAR
Allows you to set up two operation stations for your windlass. A footswitch at the bow and a hand held remote at the helm or two foot switches, it's all up to you.
|
Windlass Control Box/Solenoid from LEWMAR
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
|
RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights RailLight charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.
|
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
|
|
|
|
|
Horizontal Chrome/Brass Masthead Light, Boat Size to 12m (39'4"), 2-3/8"H x 7/8"W from PERKO
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
Gas Fill & Tank Vent - Black from PERKO
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.
|
|
|
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
|
Dual Voltage Light from PERKO, Dual-Direction Solenoid from MAXWELL
|
|
Home -> Electrical -> Meters & Distribution->Dual PowerPost Cable Connectors
New connectors provide a termination point for extending the length of outboard harnesses or other conductors. Models 10093912 and 10093920 are designed for connecting high amp conductors. Model 10093938 is designed for outboard engine installation when factory cables need to be extended.
Part No: 2016
|
|
|
|
Home -> Electrical -> Meters & Distribution->Dual PowerPost Cable Connectors
New connectors provide a termination point for extending the length of outboard harnesses or other conductors. Models 10093912 and 10093920 are designed for connecting high amp conductors. Model 10093938 is designed for outboard engine installation when factory cables need to be extended.
Part No: 2018
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Fixed Extinguishers
Adapter includes 3' of cable, which should be taken into consideration when measuring for dual installation.
Part No: DRA-1001-01
|
|
|
|
Home -> Engine Systems -> Steering Systems
For I/Os and inboards. Contains fittings for adding a second steering station or an autopilot system to an existing SeaStar stern drive or inboard steering system. Allows use of SeaStar hose.
Part No: HF5502
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Accessories
Ideal for parallel dual-station installations when two-lever, single-function controls are used. Allows two clutch or two throttle cables to be connected to a single cable leading aft to the engine.
Part No: 061371
|
|
|
|
Home -> Paint & Maintenance -> Tools -> Hand Tools
Dual-jaw, precision pliers feature a reversible, locking design with jaws that grip, strip and crimp and sharp diagonal cutting jaws for ultra-clean wire cuts. Ergonomic rubber grips add comfort and boost performance.
Part No: 15091
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes
Using a small 12V DC air compressor for power, these beautiful chromed brass dual-trumpet air horns have a rich, melodic sound that really demands attention. 20 amp draw at 12V DC. 375 and 315 Hz frequencies at 121 dB. Single mounting point.
Part No: 10106
|
|
|
|
Home -> Electrical -> Interior Lighting -> Incandescent Lights
Plenty of light from two 12V DC bulbs while at sea, or two 120V AC bulbs while connected to shore power. Bulbs are included. Light Style: Overhead Light . Volts: 12V or 120V DC . Bulb Wattage: Two 12V 11W and two 120V, 15W bulbs . Fixture Material: White powder-coat zinc base with translucent white dome . Fixture Dimensions: 9-3/4"L x 3-1/2"W x 1-7/8"D . Mounting Hardware Included/Required: #10 Screws (not included) . Lens Material/Description: White plastic .
Part No: 0318DP
|
|
|
|
Home -> Engine Systems -> Engine Instruments
Works with oil pressure, temperature, halon extinguishers, etc Use with grounded or ungrounded switches For use with Marine Engine Warning Alarm Kit Steel case measures 1-7/8"D x 1"W x 1-11/32"H Fits panels to 13/64" thick 12V DC .
Part No: 4112-RC-BP
|
|
|
|
Home -> Engine Systems -> Engine Parts->Flushing Attachments
For fresh water hook-up to a Mercury/Mariner engine–for running at idle or for flushing of the block.
Part No: 881150Q1
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories
For three-terminal, 12V series-wound motors. Reversing solenoid allows multiple control stations using foot switches, toggle switches, or a remote control.
Part No: SPA-10700W
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
Used in conjunction with up/down remote panel, held-held remote control, and/or footswitches to switch the motor in the required direction. For use with windlasses with 12V DC series-wound motors only. 200A continous capacity.
Part No: P19045
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support
Relieves stress to your transom and protects your motor and steering components against road shock and vibration during trailering. Anodized aluminum, universal-fit support strut adjusts from 26"–38" and comes with both roller and trailer mounting hardware. The cast aluminum head has over-sized rubber pads and a rubber keel pad for lower unit protection.
Part No: 59120
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->First Mate Dual Mount Cutting/Serving Tables
The dual-mount gives your table the strength of a workbench with the convenience of Magma's quick-mount system for compact storage. FDA-approved and UV-stabilized high-density polyethylene won't mildew or absorb orders and cleans easily. These larger tables feature overboard drainage slots, two filet knife holders and pliers holder. Requires Dual-Mount kit for complete installation (sold separately). Table Function: Bait/Fillet/Food Service. Material: UV Stabilized High-Density Polyethylene.
Part No: T10-505
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->First Mate Dual Mount Cutting/Serving Tables
The dual-mount gives your table the strength of a workbench with the convenience of Magma's quick-mount system for compact storage. FDA-approved and UV-stabilized high-density polyethylene won't mildew or absorb orders and cleans easily. These larger tables feature overboard drainage slots, two filet knife holders and pliers holder. Requires Dual-Mount kit for complete installation (sold separately). Table Function: Bait/Fillet/Food Service. Material: UV Stabilized High-Density Polyethylene.
Part No: T10-504
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->First Mate Dual Mount Cutting/Serving Tables
The dual-mount gives your table the strength of a workbench with the convenience of Magma's quick-mount system for compact storage. FDA-approved and UV-stabilized high-density polyethylene won't mildew or absorb orders and cleans easily. These larger tables feature overboard drainage slots, two filet knife holders and pliers holder. Requires Dual-Mount kit for complete installation (sold separately). Table Function: Bait/Fillet/Food Service. Material: UV Stabilized High-Density Polyethylene.
Part No: T10-503
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support
28"L EDC-coated steel support strut with rubber shock absorbers cushions engine and steering components against shock and relieves stress to your transom while trailering.
Part No: 59118
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Add a second station anywhere for convenience. Order wiring assembly separately -- see accessories for 15' or 25' cable.
Part No: 43670-0004
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Low Amperage Distribution->DualBus Plus 150A
Negative and positive circuits on one block with a snap-on Lexan insulating cover. Two tin-plated copper bus bars with five #10-32 terminal screws and two large stud terminals on each bus. Meets ABYC and USCG insulation requirements. Terminal Material and Size: Stainless steel #10-32 . DC Rating: 150A@48V . AC Rating: 130A@300V . Base Material: Lexan Polycarbonate . Dimensions: 4. 9"L x 2. 6"W . Insulating Cover Available: Included; snap-on .
Part No: 2722
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Low Amperage Distribution->DualBus Plus 150A
Negative and positive circuits on one block with a snap-on Lexan insulating cover. Two tin-plated copper bus bars with five #10-32 terminal screws and two large stud terminals on each bus. Meets ABYC and USCG insulation requirements. Terminal Material and Size: Stainless steel #10-32 . DC Rating: 150A@48V . AC Rating: 130A@300V . Base Material: Lexan Polycarbonate . Dimensions: 4. 9"L x 2. 6"W . Insulating Cover Available: Included; snap-on .
Part No: 2723
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece->Dublin Jacket
From the shore to the greens, you'll stay dry and comfortable in this Helly Hansen classic waterproof coat. Features: Waterproof.
Part No: BLACK-L
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece->Dublin Jacket
From the shore to the greens, you'll stay dry and comfortable in this Helly Hansen classic waterproof coat. Features: Waterproof.
Part No: BLACK-M
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece->Dublin Jacket
From the shore to the greens, you'll stay dry and comfortable in this Helly Hansen classic waterproof coat. Features: Waterproof.
Part No: BLACK-S
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Jackets & Fleece->Dublin Jacket
From the shore to the greens, you'll stay dry and comfortable in this Helly Hansen classic waterproof coat. Features: Waterproof.
Part No: BLACK-XL
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sunbrella® Fabric, 46" Wide - By The Linear YARD
Any boat owner knows how the elements can treat a boat, not to mention a boat fabric. But no other marine fabric on earth withstands the ravages of water, sun, salt or wind better than Sunbrella®. You can use Sunbrella® fabric to cover and coordinate your current accessories, or make new ones using your sewing machine Sunbrella® works just as well inside your boat, too. So your baby will look young for a long time. For questions concerning color selection, call our Tech Sales Specialists.
Part No: 4606-0000
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Masking Tape And Paper->Performance Plus Duct Tape
Our duct tape holds fast but releases easilyFinally, a hassle-free duct tape! This tape removes easily from most opaque surfaces for up to six months and does not leave a troublesome residue like lower grade tapes. Features high tensile strength for demanding applications, and a strong waterproof backing for long-term resistance to wear, abrasion, moisture and weathering. Recommended Usage: All around use . Material: Polyethylene film over cloth . Width: 2" .
Part No: 53851
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling -> Air Conditioning
Duel Duct Kits for EnviroCool and EnviroComfort Units.
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Horns
Product Features: Dual Stainless Steel Grill. Dimensions: 4-11/16" H x 9-9/16" W.
Part No: 11066
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Cam Bases
Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used.
Part No: 216
|
|
|
|
Home -> Electrical -> Shore Power->Solid Teak Covers
Two per pack 5-1/6" x 3-5/8" Plantation grown teak.
Part No: 60170
|
|
|