Top Sellers
Simple Green Marine - 20 oz
Here's a dependable cleaner/degreaser for your boatEasy to use just spray and wipe for spot cleanups. Cleans grease, oil, dirt and stains. Safe for fiberglass, painted surfaces and vinyl. 20oz.
|
Single Channel-Mate Glass Channel, 7/16"W from BECKSON MARINE
This window track is ideal for window glass or for installing sliding cabinet doors. Each channel groove is slightly (. 005") narrower than 1/4" window glass so there is positive pressure against the glass at all times. It seals out leaks and prevents glass from rattling. Made of B-FLEX marine plastic, it will not crack or discolor. The elevated slide at the bottom of the channel makes windows or doors easy to open and close. Sold in 8' lengths.
|
Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).
|
Stainless-Steel 12V Receptacle from SEAFIT
Built to last for years in the marine environment.
|
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
3/16" Stock Dia. U-Bolt, 1-3/8” Thread Length, 1-3/16" Hole Spacing, 1" Eye Dia. from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
|
|
Footman’s Loop, Fits 2" Webbing from SEAFIT
Low-profile stainless-steel straps for attaching webbing to flat surfaces.
|
Striping Tape - Dark Blue, 3/4" from SEAFIT
Premium 2mil. thick vinyl striping tape makes it easy to add a colorful accent to your boat! Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water, and the colors last from 5–7 years without fading. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Should you change your mind or decide to update the look of your boat, simply remove the tape–no need to sand or ruin your paint or finish.
|
Medium Folding Grapnel Anchor from SEAFIT
Like mushroom anchors, this four-fluke anchor is a safe choice for inflatables - there are no open flukes to puncture fabric. It's easy to store and won't get tangled in other lines on your boat.
|
|
|
|
|
Adjustable Packing Nut Wrench from SEAFIT
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
|
|
|
|
7"Dia from ORCA GREEN MARINE, 5LB from SEAFIT, from SEAFIT, 5LB from SEAFIT
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line
stainless ring used in our Anchor Float is available for those who wish to splice their own system together from components they already own.
Part No: 002.3 WM
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line
Easy to use, maintenance free, and much cheaper than a windlass! Simply place the anchor ring over your anchor line, attach the anchor ball, lower the ball overboard, and run a slow course 30-45 degrees away from the anchor. This will move the ball down the anchor line to the anchor, pulling it free, and floating it to the surface. Complete Kit Includes: Red 12" Dia. A-1 ball Stainless Steel Anchor ring 3/8" Dia. Nylon Line with stainless snap For boats up to 40' Made in U. S. A.
Part No: AR-1N-DP
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Anchor Master
Anchor Master with 3 foot nylon rope and stainless steel ring pictured.
Part No: ARO-1-DP
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Anchor Line Accessories
Our high-visibility plastic markers let you know how much line you’ve paid out, so you can set the correct amount of scope.
Part No: 306
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware
Double-end jaw and jaw swivel keeps bow and anchor aligned. Includes stainless-steel locking rings to prevent loosening of shackle pins. Handles 1/4" and 5/16" High Test (matches the load limit of 5/16" HT) and 3/8" BBB chain. Maintenance-free, non-corroding galvanized construction. 1500lb.
Part No: 440640011
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line->Chain/Rope Rodes
Quality premade rodes feature Suncor’s BBB chain and Yale’s premium three-strand twist for a rugged, durable combination at a fraction of the cost of custom rode.
Part No: C0661-1510-1
|
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line -> Anchor Line->Chain/Rope Rodes
Quality premade rodes feature Suncor’s BBB chain and Yale’s premium three-strand twist for a rugged, durable combination at a fraction of the cost of custom rode.
Part No: C0661-1508-1
|
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->Chain/Rope Rodes
Quality premade rodes feature Suncor’s BBB chain and Yale’s premium three-strand twist for a rugged, durable combination at a fraction of the cost of custom rode.
Part No: C0661-2008-2
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Windline Anchor Rollers
We stock a variety of rollers to fit the most common combinations of anchor, mounting style and boat. To select a roller, use the Selection Chart at right, in combination with the measurements above (rollers in the chart that are followed by an asterisk are not regularly stocked, but available by Special Order). They install easily using common tools. All Windline products are unconditionally guaranteed for life--any defective or damaged units will be repaired free of charge.
Part No: BRM-2
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Chain Stoppers
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
Part No: SS180001
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->LED Navigation Lights
All lights are USCG Certified for 2 nautical miles and meet COLREGS '72 standard for boats up to 50 meters (165') for running lights, and sailboats up to 20 meters (65') for Anchor and TriAnchor lights. Each light is individually tested under water to assure waterproof performance. Integrated DC-DC power supply maintains consistent brightness over a wide operating voltage range. Mounting brackets sold separately. LEDs are rated to 50,000 hours. Mounting Hardware: 6-32 screw inserts in base.
Part No: LXAP
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Folding Grapnel Anchors
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
Part No: G8001-MKII
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Folding Grapnel Anchors
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
Part No: G8003-MKII
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Folding Grapnel Anchors
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
Part No: G8005-MKII
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Folding Grapnel Anchors
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
Part No: G8008-MKII
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Hooker "Quick Set" Economy Anchors
An inexpensive "lunch hook" for small craftInexpensive fluke-type anchor for canoes, kayaks and aluminum skiffs anchoring in noncritical situations. Slip-ring design permits easy retrieval. Hot dip galvanized. Style: Pivoting Fluke . Material: Galvanized steel . Application: Small craft in non-critical situations.
Part No: 95016
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Hooker "Quick Set" Economy Anchors
An inexpensive "lunch hook" for small craftInexpensive fluke-type anchor for canoes, kayaks and aluminum skiffs anchoring in noncritical situations. Slip-ring design permits easy retrieval. Hot dip galvanized. Style: Pivoting Fluke . Material: Galvanized steel . Application: Small craft in non-critical situations.
Part No: 95021
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Hooker "Quick Set" Economy Anchors
An inexpensive "lunch hook" for small craftInexpensive fluke-type anchor for canoes, kayaks and aluminum skiffs anchoring in noncritical situations. Slip-ring design permits easy retrieval. Hot dip galvanized. Style: Pivoting Fluke . Material: Galvanized steel . Application: Small craft in non-critical situations.
Part No: 95011
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->River Anchors
.
Part No: 50118
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Safety Strobe Lights
Equiped with Aqua Signal unique Quicfits system for easy dismantling for the purpose of transport and winter storage These lights have been time- tested and this patented design is the industry standard by which all other designs are compared. Type of lamp: 90009 (Xenon 8 Ws)Housing material: polycarbonate, shock resistant, non-corrosive, nonmagnetic, seawater resistantHousing color: black. Protection degree: IP 56. Ship type: sail/power. Voltage: 12 V. Wattage: 10 W (anchor), 8 Ws (strobe).
Part No: 40808-7
|
|
|
|
Home -> Books & Videos -> Cruising Guides -> Intracoastal Waterway->Skipper Bob™ Atlantic & Gulf ICW Guides
Skipper Bob and his wife Elaine cruised more than 44,000 miles on the East Coast of the United States. Their travels have taken them up and down the Intracoastal Waterway numerous times. They completed the Great Loop Route and sailed to both the Bahamas and the Dry Tortugas. They took their trawler through the Erie, Rideau, Richelieu, and Trent Severn Canals. Marinas Along the Intracoastal Waterway Fuel prices, transient slip fees, long-term slip fees, do-it-yourself yards, and haul out fees.
Part No: SBAAICW
|
|
|
|
Home -> Books & Videos -> Books
What you need to know about anchoring--fast and easy! Anchoring is a necessary skill for any boater--power or sail--whether you are planning a picnic lunch in a secluded cove or an overnight visit in a distant anchorage. 16-panel, foldout guide provides you with fast, easy-to-follow instructions for safe and efficient anchoring.
Part No: 0071495738
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22037
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini Tops->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Pole constructed of tempered steel, which is phosphate-dipped and powder-coated to prevent rusting. Adjustable straps with non-corrosive hardware provide mounting flexibility for nearly all applications.
Part No: 22031
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22038
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22035
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22039
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22034
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22033
|
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Anchorshade II
Long been known for quality marine products, Taylor Made Products has Reinvented the highly successful AnchorShade. Based on feedback from boaters all over the world; several important design changes are being introduced. 375" diameter solid fiberglass. These innovations are sure to keep your Anchorshade looking and working well, for years to come! Adjustable pole locks in place up to 8'. Lightweight, mildew/fade resistant UV-treated nylon top which blocks out 85-90% of harmful rays.
Part No: 22036
|
|
|
