Head Lube from WEST MARINE
Formulated to keep marine and RV heads functioning smoothly, this eco-friendly head lube is made from bio-renewable ingredients using no petroleum distillates. Cleans and lubricates plungers and gaskets and conditions leather flappers for quiet, reliable operation.

LED Oval Tail Lights, Surface, Red/Clear from WEST MARINE
Technically advanced LED Oval Tail Lights feature a stop, tail and turn function and are fully waterproofThey are vibration-proof, shock-proof, and waterproof, and because they illuminate faster than conventional tail lights, trailering safety is enhanced. Rated burn time is 100,000 hours, which far surpasses the usual 3,000 hours of incandescence. Construction features permanently sonic-sealed, durable, corrosion-resistant, polycarbonate lenses. Measure 2. 25"H x 6. 88"W x .

Dinghy Towing Rope from WEST MARINE
With a highly visible, UV-resistant nylon cover and 100% braided polypropylene core, this line floats just under the surface of the water—significantly reducing the chances of it becoming entangled in a propeller. 7/16"dia. 5,000lb. breaking strength. 2.

3/8" Black LineSaver Mooring Snubber from WEST MARINE
Recently redesigned and tested to 1. 2 million cycles, these super-elastic, natural rubber snubbers absorb shock loads and extend the life of dock lines while minimizing stress to structural areas around cleats caused by the jolting action of wind, waves and wakes.

12V High-Pressure Inflator from WEST MARINE
This high-pressure electric pump clips onto any 12V battery to provide 2. 1 psi at 11. 7 cu. ft. /min. 23" hose. Inflate or deflate any inflatable or boat with ease, precision and unmatched portability.

5-Step Removable Transom Ladder, 34" (Up) 52" (Down) from WEST MARINE
These unique ladders can be left in place when underway, or removed quickly for storage. Standoffs can be cut to fit transoms at conventional or reverse angles. Each ladder includes one pair of mounting sockets. 13. 75"W. Mounting Style: Removable transom-mount . Material: 304 stainless steel . Maximum Capacity: 300lb. . Mounting Hardware: Pair of mounting sockets included . Fastener Size Required: Eight 1/4" RHMS (sold separately) .

Bowl & Drain Cleaner from WEST MARINE
Environmentally safer Pure Oceans Bowl & Drain Cleaner uses powerful natural enzymes to remove tough stains and eliminate odor without harming plastic, fiberglass or porcelain heads or drains. Lubricates head mechanisms to keep sanitation systems functioning at their best. Contains no acid, bleach or harsh chemicals. 24fl.

5-Step Gunwale-Mount Ladder, 55-1/8"L Open/38-1/4"L Folded from WEST MARINE
Handrails rise 5" above-deck to provide secure handholds. Allows you to “walk through” to the deck. The cushioned standoffs can be cut to fit hull contours. Bottom steps fold up for compact storage. Additional mounting brackets are available for multiple mounting locations. Mounting Style: Deck bracket mount . Material: 304 stainless steel . Maximum Capacity: 300lb. . Width: 13. 75"W (outside dimension) .

Sea Kayak Paddle from WEST MARINE
Large, sturdy ABS blades and a lightweight aluminum shaft achieve plenty of paddling power. 85”L. Material: Aluminum and plastic . Blade Width x Length: 6-7/8" x 15" . Handle Style: Straight .

Vang - Large 4:1, 60' x 1/2" Line from WEST MARINE
Boom vangs let you control the leech tension of your mainsail independently of the mainsheet so you can shape your mainsail for maximum efficiency. They're particularly effective off the wind, when the pull of the sheet is primarily horizontal, because they prevent the boom from lifting and spilling the wind. West Marine Rigging has created four vangs to fit most dinghies and racer-cruisers.

Plastic Drain Fitting, 2" Straight, Fits 1-1/2" Hose from FORESPAR
2" Straight, 1-1/2" NPT, Plastic.

Trailer Wheel Lug Nuts - 1/2"-20 from C E SMITH
Replacement lug nuts and bolts for your trailer wheels. Sets of 5. 1/2"-20 nuts. 1/2"-20 x 1.

52gal. Flexible Water Tank, 27-1/2" x 68-1/4" from PLASTIMO
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .

Deck Fill, Waste, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .

Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .