Top Sellers
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
Contura Rocker Switch, SPDT On/Off/On from COLE HERSEE
Waterproof switches are rated to IP66 for use on ship decks and with an LED light to indicate when the circuit is on. Several configurations are available for almost any application. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. Includes both black and gray covers. Both switches and covers are interchangeable with similar switches used as original equipment on many common boat types. Mounting Hole Size: 1. 450" x 0.
|
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
|
Fender Pump from TAYLOR
Compact, high-pressure hand pump for filling fenders, rafts, footballs, etc.
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
|
|
Covered Waterproof Foot Switch from WEST MARINE
Hinged safety cover closes over the switch to prevent accidental operation. 150A continuous rating. 4'' dia. Cutout: 2. 5'' dia.
|
Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
Scare Eye Balloon from BIRD B GONE
Inflatable Vinyl Scare Eye Balloon with Mylar Tape Tail Visual Scare Device. Confuses Birds with Lifelike Reflective Predator Eyes and Markings. Ideal for use on Fruit Trees, Patio Covers, Pool Areas, Gazebos, Boats, Etc.
|
Helmsman Compass Cover from RITCHIE NAVIGATION I
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
|
Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
|
F, Black from MASTER FENDER COVERS, F-Series Fender Cover
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F7B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F7N
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F8B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F8N
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F10B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F10N
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F11B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F11N
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F13B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-F13N
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Part No: RF5013NC
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 2700
|
|
|
|
Home -> Sailboat -> Rigging Products->Splice Lines Lifeline Fittings
Popular Johnson lifeline fittings are now available with eye ends for today's high-tech low stretch line. Recommended for use with 1/4" Amsteel or similar single braid, which weighs one seventh as much as 1/4" 1x19 cable and costs about the same amount. Johnson advises replacing the line at three year intervals. . Professional splicing recommended.
Part No: LS-2200
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop. To disconnect, push in on fitting collar and hold down while removing pipe.
Part No: 002419-1008
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables -> Barbecues And Mounts->Marine Kettle® Grill Mounting Hardware
Versatile and secure mounts install easily and disconnect quickly Magma BBQs are sold without mounts, so you can select the right mount for your needs. We recommend that you also buy a Shore Stand (Model 2794295) so that you can use your BBQ on land or on your dock.
Part No: A10-175
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Bimini Top Ball & Socket Fittings
Tired of looking at your old corroded bimini top hardware? Replace it with our 316 Stainless Steel Ball and Socket Fittings by Taco. The ball and socket design allows full rotation of the top frame. Rugged design also makes it quick and easy to fold and remove the frame. Deck hinges include pins and lanyards for secure positioning and quick release. Delrin inserts ensure smooth movement and tight rattle free fit. Fits 7/8", 3/4" and 1" tubing.
Part No: F12-0300-1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 688
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 689
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: C3703-1002
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware->Dock Assembly System
We offer a complete line of rugged dock hardware for building a dock at your summer cabin or waterfront home. Designed primarily for noncommercial users, it’s sturdy enough for boat yards and smaller marinas. Once you have a plan and materials list, we’ll supply the hardware and your local lumber yard can provide the wood. For ideas on constructing your own dock, taek a look at detailed plans at http://www. tiedown. Several sizes of float drums are available, please search under Model 140264.
Part No: 26408
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Trailer Winches
capacity will make loading and unloading your vessel a simple task—and its one-piece, corrosion-resistant aluminum frame and handle provides great protection from the elements. Features a smooth-operating dual-gear drum, center drive enclosed rachet system, switches to left or right hand drive, soft ergonomic grip, easy adjustable handle to 6", 7", or 9". Includes 2"W x 20'L strap with clear galvanized zinc snap hook. Mounting Hardware: Included .
Part No: FW20000101
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Tongue Jacks
Fulton, the industry leader for high performance jacks, is proud to introduce another addition to the F2 family of trailer jacks. Our 2,000 lb. Lift Capacity Adjustable Swivel Jack with Footplate. Jacks pack all of the features of the award winning Twin Track & Wide Track models, including Fulton's unprecedented LIMITED LIFETIME WARRANTY. The 2,000 lb. Unique ball and socket connection between jack and footplate allows for whatever articulation is required to accommodate uneven surfaces.
Part No: 1413230134
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers
Tire Carriers That Don't Spare Security or Style Designed to hold the marine trailer industry's increasingly larger wheels and newer lug configurations, Fulton F2 Tire Carriers have the strength and styling to enhance any trailer frame. One piece steel construction. All mounting hardware included. Supports cable lock (not included). Resists corrosion with superior plating.
Part No: 581902
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Tongue Jacks
Winner of the 2007 NMMA (National Marine Manufacturers Association) award for innovation, this is the jack by which others are judged Extremely robust construction features extruded aluminum alloy inner and outer tubes combined with twin alignment bushings that ensure a precision fit. An ergonomic pull pin makes it easy to swivel up for lifting or transport. Lift capacity is 1,600 pounds . Includes hardware for bolting to a 3" x 3" or 3" x 4" tongue.
Part No: 1413020134
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-35038-5E
|
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-24569-09
|
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-35157-3
|
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-24228-1
|
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Johnson Engine Cooling Pumps
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
Part No: 10-24232-1
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Boat & Trailer Tires & Rims - Bias Ply, Spoke Rims
Boat and camper tires take a real pounding on the road and long periods of storage can cause deterioration. These affordable replacement tires meet Department of Transportation Standards. Tires beginning with ST are special trailer tires with stiffer sidewalls to improve trailer stability and reduce sway. Select bias ply with galvanized, painted or chrome rims, spoked or solid, in a variety of sizes. For heavier loads and/or trailers used over long distances, we recommend radial tires.
Part No: 16540
|
|
|
