Top Sellers
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
$100 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
$250 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
WM Self-Coiling Hose - 15' from WEST MARINE
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
|
|
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
Portable Cabin Heater from WEST MARINE
Melt away the morning chill! This ultra-quiet heater is perfect for boats, homes and offices. Versatility and simplicity with three heat settings1500W (5200Btu), 900W (3120Btu) and energy saver 600W (2080Btu), which draws just 5A. Adjustable thermostat control keeps you comfortable. Antifreeze setting automatically turns on when temperature drops to 38°F. Overheat protector will not clog with dust or dirt. Draw: 5A–13A. Warranty: Three years.
|
Manual Oil Change Pump from WEST MARINE
"We don’t know anyone who looks forward to changing engine oil, but this pump should make the job a little easier. The handle makes it easy to carry the goo to a harbor recycling location or your local gas station that accepts used oil. Your engine will appreciate it!" Improved durability and capable of inflating high-pressure This value-priced oil changer makes changing oil a snap! Simply place the transfer probe down the dipstick tube and start pumping.
|
Boat Hook Tip from WEST MARINE
Designed to fit the handles of our Admiral- and Captain-Series Deck Brushes. All have positive-locking, pushbutton, quick-connector sockets that prevent accessories from rotating when in use.
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.
|
|
2" from BRUSH, from WEST MARINE, Fooler Brush - 1" from BRUSH
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Barbecue Mounts and Accessories
We recommend that you also purchase a dock-stand (model 6816698) so you can use the barbecue on land or onboard.
Part No: 83642
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->The Fooler
Features extra bristles to hold more paintDouble-thick natural bristles for smoother release and fewer drips. Extra measure of bristles to hold more coating per dip. Excellent for epoxies and anti-fouling paint. More bristles than ordinary "Chip" bruch.
Part No: 10015
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->The Fooler
Features extra bristles to hold more paintDouble-thick natural bristles for smoother release and fewer drips. Extra measure of bristles to hold more coating per dip. Excellent for epoxies and anti-fouling paint. More bristles than ordinary "Chip" bruch.
Part No: 10001
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->The Fooler
Features extra bristles to hold more paintDouble-thick natural bristles for smoother release and fewer drips. Extra measure of bristles to hold more coating per dip. Excellent for epoxies and anti-fouling paint. More bristles than ordinary "Chip" bruch.
Part No: 10025
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->The Fooler
Features extra bristles to hold more paintDouble-thick natural bristles for smoother release and fewer drips. Extra measure of bristles to hold more coating per dip. Excellent for epoxies and anti-fouling paint. More bristles than ordinary "Chip" bruch.
Part No: 10002
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->The Fooler
Features extra bristles to hold more paintDouble-thick natural bristles for smoother release and fewer drips. Extra measure of bristles to hold more coating per dip. Excellent for epoxies and anti-fouling paint. More bristles than ordinary "Chip" bruch.
Part No: 10003
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->The Fooler
Features extra bristles to hold more paintDouble-thick natural bristles for smoother release and fewer drips. Extra measure of bristles to hold more coating per dip. Excellent for epoxies and anti-fouling paint. More bristles than ordinary "Chip" bruch.
Part No: 10004
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> Hailers & Intercoms->Forerunner & Edge Fitness Accessories
Forerunner & Edge Fitness Accessories The USB ANT™ Stick plugs into your PC to act as a Bluetooth, receiving data from the Forerunner 50 or 405 so you can share and store your workout info. The Heart Rate Monitor continuously tracks heart beats per minute, wirelessly tranmitting to the Edge or Forerunner.
Part No: 010-10998-00
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Replacement hose for foot operated pumps such as the Bravo 10.
Part No: SP14
|
|
|
|
Home -> Seating & Covers -> Seating
Heavy-duty cast aluminum with a locking adjustment knob. Nylon insert protects the pedestal post from scratches. Not for use with adjustable pedestals. 10 1/2''L x 13''W. Fits all 2 7/8'' dia.
Part No: 5205
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Foot Switches
Lewmar Foot Swithces.
Part No: 229091
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Foot Switches
Lewmar Foot Swithces.
Part No: 68000616
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories->Maxwell Marine Windlass Parts & Accessories
Maxwell Marine Windlass Parts & Accessories.
Part No: SP1387
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Footman’s Loops
Low-profile stainless-steel straps for attaching webbing to flat surfaces.
Part No: C0224-0025-W
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Footman’s Loops
Low-profile stainless-steel straps for attaching webbing to flat surfaces.
Part No: C0224-0050-W
|
|
|
|
Home -> Seating & Covers -> Seating->5 Star Chair Accessories
Semiautomatic Slider. Fixed-Height Aluminum Pedestal. Adjustable Helmsman's Base Stand. Manual Slider.
Part No: 5405
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Bushing Power Trim
362493 Replaces: Mercruiser Inboard/Outboard #23-99291 Fits 120/260 drive units - S/N 6225277 & up.
Part No: 18-2341-1-9
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Bushing Power Trim
362493 Replaces: Mercruiser Inboard/Outboard #23-99291 Fits 120/260 drive units - S/N 6225277 & up.
Part No: 18-4288-9
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Solenoids
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Part No: 18-5834
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Cant find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 3044
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Cant find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 3052
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Cant find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 3072
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->MerCruiser Alpha I Complete Lower Drive Unit
Complete lower gear housing assembly built with proven components and tested to the same standards as Upper Units. For MerCruiser R, MR, Alpha.
Part No: 18-2400
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Solenoids
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Part No: 18-5818
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->MerCruiser Alpha I Complete Lower Drive Unit
Complete lower gear housing assembly built with proven components and tested to the same standards as Upper Units. For MerCruiser R, MR, Alpha.
Part No: 18-2443
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Bushing Power Trim
362493 Replaces: Mercruiser Inboard/Outboard #23-99291 Fits 120/260 drive units - S/N 6225277 & up.
Part No: 18-2702-04D
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Grand Prix Series Radar / Chartplotter NavPods, for Sail
Built to protect the latest marine electronics with a new double-seal gasket for improved waterproof integrity. Features tamper-proof fasteners with polyurethane seals and rugged ABS plastic construction. Includes a 6" tamper-proof wrench.
Part No: GP1061
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Grand Prix Series Radar / Chartplotter NavPods, for Sail
Built to protect the latest marine electronics with a new double-seal gasket for improved waterproof integrity. Features tamper-proof fasteners with polyurethane seals and rugged ABS plastic construction. Includes a 6" tamper-proof wrench.
Part No: GP1051
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories->Windlass Control Solenoids
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Part No: 68000320
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Windlass Control Solenoids
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Part No: 68000318
|
|
|