Top Sellers
|
|
Pro Washdown Kit from SHURFLO
Everything you need for tough washdown applications all in one package. Includes the durable 4. 0gpm Pro Blaster washdown pump. Blaster Nozzle. Raw Water Strainer. 3/4" and 5/8" garden hose adapters . UV-protected 25' coiled hose. Coated, seamless motor shell for enhanced protection against wet environments. Manufacturer's Documents Installation Guidelines.
|
12V Blaster Washdown Pump, 3.5 GPM from SHURFLO
Blast the grimiest decks clean with one of these durable freshwater/saltwater pumps. Positive-displacement three/four chamber diaphragm design is self-priming up to 6' and can run dry without damage. Include 3/4" and 5/8" garden hose adapters. Pro Blaster features higher capacity and a seamless motor shell for enhanced protection in saltwater environments. Suitable for mounting in wet locations. Include fittings and Blaster spray nozzle. Switch Type: Sealed 45psi pressure switch .
|
Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .
|
|
|
Reed Switch Sending Unit, 18-1/2" Tank Depth from MOELLER
Direct OEM replacements for gasoline applications, calibrated for 240-33 ohm gauges. Stainless steel construction, with gasket and screws included.
|
Reed Switch Sending Unit, 9" Tank Depth from MOELLER
Direct OEM replacements for gasoline applications, calibrated for 240-33 ohm gauges. Stainless steel construction, with gasket and screws included.
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
Fuel and Carburetor Filters from MERCURY MARINE
In-Line outboard filters with plastic bowls fit 1/4" or 5/16" fuel lines. Carburetor filters fit Rochester 2- and 4-barrel or MerCarb 2-barrel (Model 1661800) or Rochester 2-barrel w/Carter fuel pump (Model 1661727). Fuel Type: Gasoline . Flow Rate: n/a . Filtering Fidelity: n/a . Mounting Head: n/a . Inlets/Outlets: 1/4" . Element Dimensions: n/a . Bowl Material: Plastic . Drain Fitting: n/a .
|
Safe-T QC Helm from TELEFLEX
For use in almost all stern drive, inboard and other power-assisted applications where No Feedback steering is not required. Single Station. Boat Type: All stern drive, inboard, and power-assisted applications. Steering Type: Rotary Safe-T quick helm. Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H. Steering Wheel: Up to 16". Not included. Steering Wheel Shaft: 3/4" tapered. Cable Type: QC II (SSC62). Mounting Hardware: Included.
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
Swage Tool For Small Diam Wire from SEAFIT
Swage your own oval sleeves with this cadmium-plated steel tool. Pressure is transmitted to the copper sleeve by tightening two bolts on the tool with a socket wrench.
|
Series 315 Outboard Fuel Hose - 3/8"ID from SHIELDS RUBBER
Premium-quality fuel hose designed for outboard feed and vent lines. Remains flexible at low temperatures and resists UV sunlight. Silverado 2000 complies with SAE J1527 Type B2 specifications. Should not be used in applications requiring the use of Type B1 fuel feed line.
|
|
Fuel Line - 3, Fuel Line Assembly - 8' - Mercury from SIERRA
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034385-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034392-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034388-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034399-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034391-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 033389-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034390-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034394-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034393-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Silverado 1000 This item is priced per foot.
Part No: 18-8049
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
Part No: 034395-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Silverado 1000 This item is priced per foot.
Part No: 18-8000
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
For OMC pressurized systems (double) - replaces J/E 322656.
Part No: 18-8051
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Chrysler / Force 3/8" Barb Chrome Plated Brass Fuel Line Engine And Tank Connector.
Part No: 033484-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Yamaha 3/8" Hose Barb Female Fuel Line Engine And Tank Connector.
Part No: 033481-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Merc PT fuel line assembly Length: 12'.
Part No: 18-8023EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose and a 3/8" primer bulb (18-8004). Length: 12' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8032EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, a 3/8" primer bulb (18-8005), a fuel connector to the tank (18-80405) and a fuel connector to the engine (18-80404). Length: 6' . Hose Diameter: 3/8" . Silverado 2000 Premium .
Part No: 18-8035EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and a fuel line connector to engine (18-8062). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8011EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Fits: 2 HP (1 cyl. ) - 75 HP (3 cyl. ) (1976-02) Length: 8' . Hose Diameter: 5/16" . Silverado 1000 OE Equivalent . Includes: Primer bulb 5/16" diameter (18-8004) with hose clamps. Two fuel connectors for tank and engine (18-8056).
Part No: 18-8059
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Length: 8' Hose Diameter: 5/16" Silverado 2000 Premium Includes: Primer bulb 5/16" diameter (18-8004) with hose clamps. Two fuel connectors for tank and engine (18-8056).
Part No: 18-8009
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and one fuel line connector (18-8056). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8014EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and a 1/4" hose barb to the tank (18-8055) and a fuel line connector to the engine (18-8085). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits Force 40 HP and larger (1993 & Newer), Force 9.
Part No: 18-8024EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Fuel Lines & Accessorie
Includes hose, 3/8" primer bulb (18-8004), a fuel line connector to the tank (18-8070) and a fuel line connector to the engine (18-8085). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits Force 40 HP and larger (1993 & Newer), Force 9.
Part No: 18-8025EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Has older style small quick connect on engine end and 5/16" NPT threaded fitting on the tank end. Primer bulb is included in the 8ft. (2. 44 m) assembly. Engine end fits Force 5 HP, and fits 9. 9/15HP (1997 & prior), and 25HP (3 cyl. Tank end has fitting for thread in style tank connection or attaching a bayonet. Length: 8' Hose Diameter: 5/16" Silverado 2000 Premium Includes: Primer bulb 5/16" diameter (18-8004) with hose clamps. Female tank end fuel connector (18-8070).
Part No: 18-8010
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004), a 1/8" fuel line connector to tank (18-8054) and a 1/4" fuel line connector to engine (18-8055). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8012EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004), a fuel line connector to tank (18-8091) and a fuel line connector to engine (18-8085). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits Force 40 HP and larger (1993 & Newer), Force 9.
Part No: 18-8016EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004), a fuel line connector to the tank (18-8079) and a fuel line connector to the engine (18-8088). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium .
Part No: 18-8027EP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Silverado 1000 OE Equivalent Length: 8' Diameter: 5/16" Assembly includes: 18-8078 - Fuel connector to tank. 18-8079 - Fuel connector from tank to hose. 18-8004 - Primer Bulb. 18-8088 - Fuel connector from hose to engine. 18-8089 - Fuel connector to engine.
Part No: 18-8028
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Includes hose, 3/8" primer bulb (18-8004) and two small inlet fuel line connectors to tank and engine (18-8062). Length: 8' . Hose Diameter: 5/16" . Silverado 2000 Premium . Fits 3.
Part No: 18-8019EP
|
|
|