|
|
Seating & Covers -> Seating
Heavy-duty cast aluminum with a locking adjustment knob. Nylon insert protects the pedestal post from scratches. Not for use with adjustable pedestals. 10 1/2''L x 13''W. Fits all 2 7/8'' dia.
Part No: 5205
|
|
|
Anchor & Docking -> Windlasses & Rollers->Maxwell Marine Windlass Parts & Accessories
Maxwell Marine Windlass Parts & Accessories.
Part No: SP1387
|
|
|
Anchor & Docking -> Windlasses & Rollers->Windlass Switches
To operate your windlass safely in all weather conditions you need top quality switch gear that can stand up to the elements.
Part No: 90900B
|
|
|
Anchor & Docking -> Windlasses & Rollers->Windlass Switches
To operate your windlass safely in all weather conditions you need top quality switch gear that can stand up to the elements.
Part No: 90900w
|
|
|
Sailboat -> Shackles, Snaps & Fittings->Footman’s Loops
Low-profile stainless-steel straps for attaching webbing to flat surfaces.
Part No: C0224-0025-W
|
|
|
Sailboat -> Shackles, Snaps & Fittings->Footman’s Loops
Low-profile stainless-steel straps for attaching webbing to flat surfaces.
Part No: C0224-0050-W
|
|
|
Seating & Covers -> Seating->5 Star Chair Accessories
Semiautomatic Slider. Fixed-Height Aluminum Pedestal. Adjustable Helmsman's Base Stand. Manual Slider.
Part No: 5405
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils->Bushing Power Trim
362493 Replaces: Mercruiser Inboard/Outboard #23-99291 Fits 120/260 drive units - S/N 6225277 & up.
Part No: 18-2341-1-9
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils->Bushing Power Trim
362493 Replaces: Mercruiser Inboard/Outboard #23-99291 Fits 120/260 drive units - S/N 6225277 & up.
Part No: 18-4288-9
|
|
|
Engine Systems -> Engine Parts->Sierra Solenoids
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Part No: 18-5834
|
|
|
Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Cant find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 3044
|
|
|
Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Cant find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 3052
|
|
|
Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Cant find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 3072
|
|
|
Engine Systems -> Propellers & Drive Trains->MerCruiser Alpha I Complete Lower Drive Unit
Complete lower gear housing assembly built with proven components and tested to the same standards as Upper Units. For MerCruiser R, MR, Alpha.
Part No: 18-2400
|
|
|
Sailboat -> Downwind Poles & Cars->Ultra Series™ GPS Spinnaker Pole End Fittings
Offshore Series Grand Prix and Ultra Series™ Grand Prix end fittings feature Forespar’s proven spring-loaded piston system with roller for positive lock and release. The UGPS end fitting includes a stainless steel-lined throat. All UGPS and GP end fittings are for outboard pole end use only. Will not work with mast cars. Internal trip only. UGPS Style: Max. boat length 60'. GP Style: Max.
Part No: 309033
|
|
|
Sailboat -> Downwind Poles & Cars->Ultra Series™ GPS Spinnaker Pole End Fittings
Offshore Series Grand Prix and Ultra Series™ Grand Prix end fittings feature Forespar’s proven spring-loaded piston system with roller for positive lock and release. The UGPS end fitting includes a stainless steel-lined throat. All UGPS and GP end fittings are for outboard pole end use only. Will not work with mast cars. Internal trip only. UGPS Style: Max. boat length 60'. GP Style: Max.
Part No: 309035
|
|
|
Engine Systems -> Engine Parts->Sierra Solenoids
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Part No: 18-5818
|
|
|
Engine Systems -> Propellers & Drive Trains->MerCruiser Alpha I Complete Lower Drive Unit
Complete lower gear housing assembly built with proven components and tested to the same standards as Upper Units. For MerCruiser R, MR, Alpha.
Part No: 18-2443
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils->Bushing Power Trim
362493 Replaces: Mercruiser Inboard/Outboard #23-99291 Fits 120/260 drive units - S/N 6225277 & up.
Part No: 18-2702-04D
|
|
|
Electronics -> Radars -> Radar Accessories->Grand Prix Series Radar / Chartplotter NavPods, for Sail
Built to protect the latest marine electronics with a new double-seal gasket for improved waterproof integrity. Features tamper-proof fasteners with polyurethane seals and rugged ABS plastic construction. Includes a 6" tamper-proof wrench.
Part No: GP1061
|
|
|
Electronics -> Radars -> Radar Accessories->Grand Prix Series Radar / Chartplotter NavPods, for Sail
Built to protect the latest marine electronics with a new double-seal gasket for improved waterproof integrity. Features tamper-proof fasteners with polyurethane seals and rugged ABS plastic construction. Includes a 6" tamper-proof wrench.
Part No: GP1051
|
|
|
Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories->Windlass Control Solenoids
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Part No: 0052507
|
|
|
Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories->Windlass Control Solenoids
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Part No: 68000320
|
|
|
Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories->Windlass Control Solenoids
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Part No: 68000318
|
|
|
Sailboat -> Downwind Poles & Cars->Ultra Series™ GPS Spinnaker Pole End Fittings
Offshore Series Grand Prix and Ultra Series™ Grand Prix end fittings feature Forespar’s proven spring-loaded piston system with roller for positive lock and release. The UGPS end fitting includes a stainless steel-lined throat. All UGPS and GP end fittings are for outboard pole end use only. Will not work with mast cars. Internal trip only. UGPS Style: Max. boat length 60'. GP Style: Max.
Part No: 304021
|
|
|
Sailboat -> Downwind Poles & Cars->Ultra Series™ GPS Spinnaker Pole End Fittings
Offshore Series Grand Prix and Ultra Series™ Grand Prix end fittings feature Forespar’s proven spring-loaded piston system with roller for positive lock and release. The UGPS end fitting includes a stainless steel-lined throat. All UGPS and GP end fittings are for outboard pole end use only. Will not work with mast cars. Internal trip only. UGPS Style: Max. boat length 60'. GP Style: Max.
Part No: 304022
|
|
|
Sailboat -> Downwind Poles & Cars->Ultra Series™ GPS Spinnaker Pole End Fittings
Offshore Series Grand Prix and Ultra Series™ Grand Prix end fittings feature Forespar’s proven spring-loaded piston system with roller for positive lock and release. The UGPS end fitting includes a stainless steel-lined throat. All UGPS and GP end fittings are for outboard pole end use only. Will not work with mast cars. Internal trip only. UGPS Style: Max. boat length 60'. GP Style: Max.
Part No: 304024
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils->Trim and Tilt Relays
Power Trim Relay 5-terminal.
Part No: 18-5704
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils->Trim and Tilt Relays
Power Trim Relay 5-terminal.
Part No: 18-6271
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils->Trim and Tilt Relays
Power Trim Relay 5-terminal.
Part No: 18-6268
|