Top Sellers
Solenoid 18-5817D, Curved Bracket replaces Mercury P/N 89-96158T from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Replaces Mercury P/N 89-850188T1, 89-818999A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Oil Filter - OMC Johnson/Evinrude, Suzuki from SIERRA
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
Water Circulating Pump - #18-3583 - Volvo # 3853850, 835390-6, 856364-5; Crusader #7142520; Mercruiser # 17437, 60658, 850399-1, OMC #980477, 985429; Pleasurecraft # RA057018 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
10 Micron Replacement Filter Element for Yamaha EFI/DFI MAR-FUELF-IL-TR, 90gph from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
6" Spark Plug Wire 18-8816-1 from SIERRA
Manufactured for your specific application, MagForce™ wire leads include a kevlar magnetic suppression core, with superior RFI elimination to protect the most sensitive modern electronics from stray noise and static. Durable stainless steel wound conductors create the hottest spark for maximum horsepower and engine performance. Spark plug and distributor terminals are also stainless steel for corrosion resistance and maximum conductivity.
|
18-1952-1 Manifold, MerCruiser, 99746A8, 65604A4 from SIERRA
Sierra exhaust manifolds, risers and elbows are 100% painted where the competition sends theirs out in primer alone. When the technician buys a manifold from us, time spent watching paint dry is saved for other profit generating work. Manifolds, risers and elbows are individually packaged in Instapack, an expanding packaging foam that keeps the part from chipping and breaking during transportation Water left in manifolds over the winter months can freeze and crack requiring replacement.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Magnetic Drain Plug Replaces Merc 10-14834A-1 from SIERRA
Drain plugs leak? Replace them with these!Non-magnetic plug fits upper and lower units. Magnetic plug installs on lower unit and attracts small pieces of metal to keep them from damaging vital parts. For Mercruiser #1, R, MR, Alpha, Alpha I Gen II outdrives .
|
10 Micron Replacement Filter Element for Mercury 35-807172/35/35-802893Q, Yamaha ABB-FUELF-IL-TR (Short) from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Fuel Water Separator Filter Elements with 10 Micron Technology, Aqua View Clear Polymer Bowl from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Mercury, 135 to 200hp V6, 105hp Jet, 8 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Aqua View Element Only, Mercury Replacement Element, Replaces Racor S3213 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
Plate from SIERRA, Plug from SIERRA, End from SIERRA, Plate
|
|
Home -> Engine Systems -> Propellers & Drive Trains
Sierra 18-4211 Plastic Washer for Volvo Penta replaces 850888-9.
Part No: 18-4211
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches
**Plate-Hatch life|**Plate-Hatch life.
Part No: MP49540
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches
**Plate-Hatch life|**Plate-Hatch life.
Part No: MP49550
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Plate|**Plate.
Part No: 18-3357
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Exhaust, Manifolds
**Gasket-Mntng Plt/DrvShftHsng|**Gasket-Mntng Plt/DrvShftHsng.
Part No: 18-0334
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-Pilot Plate|**Tool-Pilot Plate.
Part No: 18-9815
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Plate-Pressure|**Plate-Pressure.
Part No: 18-4254
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Plate-End Commutator|**Plate-End Commutator.
Part No: 18-6254
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Plate-End Manifold|**Plate-End Manifold.
Part No: 18-1941
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-Plate/Puller Bar|**Tool-Plate/Puller Bar.
Part No: 18-9814
|
|
|
|
Home -> Engine Systems -> Engine Parts
**End Plate|**End Plate.
Part No: 18-5021
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Cam Bases
Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used.
Part No: 238
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Cam Bases
Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used.
Part No: 239
|
|
|
|
Home -> Engine Systems -> Engine Parts->Manifold Cover Plates
Fits Chris Craft, Crusader, Mercruiser, OMC/Cobra sterndrive, Pleasurecraft and Volvo Penta.
Part No: 18-1917
|
|
|
|
Home -> Engine Systems -> Engine Parts->Manifold Cover Plates
Fits Chris Craft, Crusader, Mercruiser, OMC/Cobra sterndrive, Pleasurecraft and Volvo Penta.
Part No: 18-1912
|
|
|
|
Home -> Engine Systems -> Engine Parts->Manifold Cover Plates
Fits Chris Craft, Crusader, Mercruiser, OMC/Cobra sterndrive, Pleasurecraft and Volvo Penta.
Part No: 18-1911
|
|
|
|
Designed for swim platforms and other horizontal surfaces, this ladder is hinged at the mounting point to swing up and out of the way. Arched rails serve as convenient handholds. Heavy duty "chair tips" on all tube ends protect hands and hull from damage. Folds in half for compact storage Extends 23" below mounting surface, folded 40" unfolded 11.
Part No: W-P-4
|
|
|
|
Ultra Grip 6" Long Nose/ Cutter/ Sheath Kit From the Corrosion Resistant "CR" Series Tools coated with a nickel matte finish to protect against corrosion. Specially formulated forged steel provides unmatched strength and durability. Custom Ultra-Grip handles give you a comfortable non-slip grip under all conditions.
Part No: C6CRKIT
|
|
|
|
Home -> Engine Systems -> Engine Parts->Plug Boss
Don’t forget to install your trailerable boat’s drain plug and get that sinking feeling! Get the Plug Boss instead. Put the bright red anodized aluminum plug holder in the most logical place possible, on the trailer winch handle, and never forget to reinstall your drain plug when you launch your boat (or remove it when you haul out). Choose a Plug Boss to fit either the 1" rubber tee handle drain plug or a 1/2" pipe threaded bronze drain plug.
Part No: 2401
|
|
|
|
Home -> Engine Systems -> Engine Parts
PLUG KIT.
Part No: 806608Q01
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Plug-Expansion (5)|**Plug-Expansion (5).
Part No: 18-4245-9
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Plug-Welch|**Plug-Welch.
Part No: 18-4272
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Plug-Expansion (5)|**Plug-Expansion (5).
Part No: 18-4247-9
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Plug-Expansion (5)|**Plug-Expansion (5).
Part No: 18-4246-9
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Plug|**Plug.
Part No: 18-0826
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Plug-Expansion|**Plug-Expansion.
Part No: 18-4247
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Plug-Expansion|**Plug-Expansion.
Part No: 18-4200
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Plug-Expansion|**Plug-Expansion.
Part No: 18-4245
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Plug ( 5)|**Plug ( 5).
Part No: 18-3232-9
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Plug-Expansion (5)|**Plug-Expansion (5).
Part No: 18-4200-9
|
|
|