Welcome! Please Sign-In
Top Sellers
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
Snap Furl CF-700 Furling System from SCHAEFER
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
Small Boat Clevis Pin Kit from JOHNSON, C.S.
Small Boat Clevis Pin Kit from JOHNSON, C.S.
Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16".
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
Aquatech Boots, Black, 7 from GILL
Aquatech Boots, Black, 7 from GILL
2mm double-lined neoprene boots are idea for dinghy and small boat performance sailing and offer protection and secure footing in demanding conditions. They feature a wraparound, non- marking natural rubber sole for improved grip, flatlocked seams for comfort and an adjustable strap for maximum support. .
Flush Lock and Latch from PERKO
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
Arrow Style Windvane from RONSTAN
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
Mushroom Anchor, 8lb., Black from GREENFIELD PRODUCTS
Mushroom Anchor, 8lb., Black from GREENFIELD PRODUCTS
The ideal size and weight for skiffs, canoes, inflatables and other small boats in calm waters.
Anchor, Folding Grapnel 3 LB. from SEAFIT
Anchor, Folding Grapnel 3 LB. from SEAFIT
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
Ultima Electronic Bilge Switch from JOHNSON PUMPS
Ultima Electronic Bilge Switch from JOHNSON PUMPS
The same switch that comes preinstalled on Johnson Ultima Combo Automatic Bilge Pumps. With no moving parts and totally sealed solid state electronics, this mercuryfree switch never corrodes or jams on debris. Activates/deactivates at 2" and 3/4" fluid levels. A three second delay prevents false starts. Rated to handle pumps up to 20 amps at 12V or 24V DC. Activation Method: Solid-state electronic . Dimensions: 2-3/8"H x 2-11/16"L x 1-1/8"D .
Trapeze & Vang Cleat from CLAMCLEAT
Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.
Flush Cup Door Latch from PERKO
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
1-1/2" Traveler Track End Stop from SCHAEFER
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
Boat Covers

Select your boat manufacturer:

Please Choose a Model Year:   

Small Boat, 1-1, Get-A-Grip Strip - 9' Roll, Genoa Track Slide, Fits 1-1

Gen II Shaft Seal, 4", Stern Tube: 6-5/8" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-400-658
Gen II Shaft Seal, 4", Stern Tube: 6" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-400-6
Gen II Shaft Seal, 4", Stern Tube: 7" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-400-7
Gen II Shaft Seal, 4", Stern Tube: 8" from LASDROP SHAFT SEALS Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-400-8
Gen-Sep Water Separator, 1-1/2" Diameter, Gas In/Out 1.5", Water Outlet 1.25" from CENTEK INDUSTRIES Home -> Engine Systems -> Engine Parts->Gen-Sep Water Separators
Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube. Dimensions: 10.
Part No: 1020150
Gen-Sep Water Separator, 2" Diameter, Gas In/Out 2.0", Water Outlet 1.5" from CENTEK INDUSTRIES Home -> Engine Systems -> Engine Parts->Gen-Sep Water Separators
Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube. Dimensions: 10.
Part No: 1020200
General Adhesive Cleaner - Quart from 3M PRODUCTS Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->General Adhesive Cleaner
Adhesives clean up easily with thisSpecially blended solvent for easy cleanup of most adhesives. Quickly removes wax, grease, oil and tar. Doesn't harm dried paint, vinyl or fabrics. Great for removing striping tape residue. Excellent for removing Feathering Disk Adhesive. Quart or 20oz.
Part No: 08984
General Maintenance Manual from WEST MARINE Home -> Boats & Motors -> Inflatable Boats->West Marine / Avon / Zodiac Inflatables Accessories
West Marine/Avon /Zodiac Inflatable Accessories.
Part No: N63018
Genoa Lead Block, High Performance, 3,000lb. SWL, Fits 1-1/4" T-Track from HARKEN Home -> Sailboat -> Blocks->Genoa Lead Blocks
The High Performance car features a roller/ball bearing sheave for higher working loads, and rides on low friction sliders. It has a lever-operated pin stop that operates easily even with cold hands, and can be locked open and used to dead-end an adjustment line. Note: These blocks fit Harken low-profile traveler track Configuration: Twin sheet lead block . Sheave: Anodized aluminum . Ball Bearings: 249, 1537 - Torlon® ball bearings, 1997E -Torlon® roller/ball bearings . : 1/2" max.
Part No: 1997E
Genoa Lead Block, Midrange, 2,300lb. SWL, Fits 3154 Track from HARKEN Home -> Sailboat -> Blocks->Genoa Lead Blocks
The High Performance car features a roller/ball bearing sheave for higher working loads, and rides on low friction sliders. It has a lever-operated pin stop that operates easily even with cold hands, and can be locked open and used to dead-end an adjustment line. Note: These blocks fit Harken low-profile traveler track Configuration: Twin sheet lead block . Sheave: Anodized aluminum . Ball Bearings: 249, 1537 - Torlon® ball bearings, 1997E -Torlon® roller/ball bearings . : 1/2" max.
Part No: 1537
Genoa Lead Block, Small Boat, 1,250lb. SWL, Fits 2720 Track from HARKEN Home -> Sailboat -> Blocks->Genoa Lead Blocks
The High Performance car features a roller/ball bearing sheave for higher working loads, and rides on low friction sliders. It has a lever-operated pin stop that operates easily even with cold hands, and can be locked open and used to dead-end an adjustment line. Note: These blocks fit Harken low-profile traveler track Configuration: Twin sheet lead block . Sheave: Anodized aluminum . Ball Bearings: 249, 1537 - Torlon® ball bearings, 1997E -Torlon® roller/ball bearings . : 1/2" max.
Part No: 249
Genoa Track Slide, Fits 1-1/4" T-Track from RONSTAN Home -> Sailboat -> Traveler, Tracks & Vang->Genoa Track Slides
Ronstan’s stainless steel slides come with tough plastic inserts which keep the car from scarring the track, while making it easier to move the car. Spring-loaded adjustment pins for fast, positive positioning . Semicircular bails . Slides for 1" track are typically used on boats to 26' . Slides for 1-1/4" track are typically used on boats to 40' .
Part No: RC73202
Genoa Track Slide, Fits 1" T-Track from RONSTAN Home -> Sailboat -> Traveler, Tracks & Vang->Genoa Track Slides
Ronstan’s stainless steel slides come with tough plastic inserts which keep the car from scarring the track, while making it easier to move the car. Spring-loaded adjustment pins for fast, positive positioning . Semicircular bails . Slides for 1" track are typically used on boats to 26' . Slides for 1-1/4" track are typically used on boats to 40' .
Part No: RC72503
Genset AIRSEP® Air Filter from WALKER ENGINEERING Home -> Engine Systems -> Engine Parts
Keep your Genset AIRSEP system running in peak condition with this washable replacement air filter element. Rated for 250 hours between filter cleanings. Washable replacement air filter.
Part No: CD171A
George Washington's Secret Navy from MCGRAW HILL Home -> Books & Videos -> Books
Knowing that congress would not approve, George Washington secretly took a small troop to sea and proceeded to attack a British merchant vessel in order to disrupt enemy supply lines.
Part No: 9780071493895
Georgian Bay from CANADIAN HYDRO Home -> Electronics -> Software -> Nav Charts On CD-ROM->Canadian Hydrographic Service Digital Charts
Canadian Hydrographic Service's digital charts are simple electronic versions of paper charts, popular on pleasure craft.
Part No: RM-CEN06
Gerber EZ Out Rescue Knife from GERBER BLADES Home -> Interior, Flags & Gifts -> Knives & Pocket Tools -> General Purpose Knives
The emergency knife that cuts but can't puncture On a life raft or inflatable boat where you can't afford a puncture, pointy knives are risky. Gerber's E-Z Out Rescue Knife cuts quickly through line, but its blunt tip is safer for boats and people. Opens fast with one hand. Fiberglass-reinforced thermoplastic handle.
Part No: 46971
Gerber-Pack-Evo+EvoJr Knife Combo Pack from GERBER BLADES Home -> Interior, Flags & Gifts -> Knives & Pocket Tools -> General Purpose Knives
A straight spine profile reveals a "seamless" design that begins at the back of the blade and continues along the length of the upper edge of the handle. Seven slanting oval openings in the anodized aluminum handle. The oval openings further reduce the overall weight of these knives. Constructed of 440 stainless steel coated with titanium nitride for added corrosion resistance. Thumb stud for easy one-handed opening.
Part No: 22-41758
Get Your Captain's License, 4th Edition from MCGRAW HILL Home -> Books & Videos -> Books -> Narratives
Includes CD with every possible question and answer on Coast Guard exams and covers all popular Coast Guard captain's licenses. Simulates Coast Guard exams with the AutoExam CD software and replaces or augments classroom instruction costing hundreds of dollars. Table of Contents: Introduction 1. Qualifying for a License 2. Rules of the Road 3. Deck General 4. Navigation General 5. Safety 6. Navigation Problems 7. Auxiliary Sail Endorsement 8. Examination Illustrations 9.
Part No: 9780071603690
Get-A-Grip Strip - 9' Roll, black from VELCRO Home -> Cabin & Galley -> Bedding & Drapery -> Drapery Supplies->Velcro® Get-A-Grip
Tough, reusable straps offer stable and secure closure. A convenient and easy way to hold cables, wires, cords and more. Choose from 5-pc multi color or 9' black roll. Easy to use.
Part No: 90340
Get-A-Grip Strips - 8" x 1/2", 5 pcs from VELCRO Home -> Cabin & Galley -> Bedding & Drapery -> Drapery Supplies->Velcro® Get-A-Grip
Tough, reusable straps offer stable and secure closure. A convenient and easy way to hold cables, wires, cords and more. Choose from 5-pc multi color or 9' black roll. Easy to use.
Part No: 90438
GFCI Duplex Outlet from MARINCO Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->GFCI Duplex Outlet
GFCI's measure imbalances in AC circuits, and disrupt service when electrocution danger is likely. Sensitive to a current leak of only 4-6 milliamps. 15-amp capacity; fits standard 15A, three- blade plugs. Installs in standard outlet boxes.
Part No: 1591-FI
GFCI Outlet Cover - Stainless Steel from MARINCO Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->GFCI Duplex Outlet
GFCI's measure imbalances in AC circuits, and disrupt service when electrocution danger is likely. Sensitive to a current leak of only 4-6 milliamps. 15-amp capacity; fits standard 15A, three- blade plugs. Installs in standard outlet boxes.
Part No: 7879CR-FI
GH BlueSurprise Auto Tag from ILLUSION LURES Home -> Interior, Flags & Gifts -> Gifts -> Cameras & Equipment->A Collection of Guy Harvey Auto Tags
Guy Harvey is famous for his beautiful recreation of marine life.
Part No: 350-Y005
GH Breaking Away 3D Auto Tag from ILLUSION LURES Home -> Interior, Flags & Gifts -> Gifts -> Cameras & Equipment->A Collection of Guy Harvey Auto Tags
Guy Harvey is famous for his beautiful recreation of marine life.
Part No: 360-Y048
GH Breaking Away Decal from ILLUSION LURES Home -> Interior, Flags & Gifts -> Gifts->Decal Collection by Guy Harvey
Decal Collection by Guy Harvey who is famous for his beautiful recreation of marine life.
Part No: 303-Y048
GH Breaking Away Koozie from ILLUSION LURES Home -> Interior, Flags & Gifts -> Gifts->Koozie Collection by Guy Harvey
From the Koozie Collection by Guy Harvey who is famous for his beautiful recreation of marine life.
Part No: 457-Y048
GH Breaking Away Wall Art from ILLUSION LURES Home -> Interior, Flags & Gifts -> Gifts -> Gifts & Specialty Items->Wall Signs Collection by Guy Harvey
Guy Harvey is famous for his beautiful recreation of marine life.
Part No: 116-Y048
GH Dive Flag Magnet from ILLUSION LURES Home -> Interior, Flags & Gifts -> Gifts->Guy Harvey Magnet Art
Guy Harvey is famous for his beautiful recreation of marine life.
Part No: 320-Y015
GH Dolphin Auto Frame from ILLUSION LURES Home -> Interior, Flags & Gifts -> Gifts->A Collection of Guy Harvey Strip Auto Frames
Guy Harvey is famous for his beautiful recreation of marine life.
Part No: 355-Y009
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11