Top Sellers
|
|
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
|
|
Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Vertical Plunger Galley Pump, White from FYNSPRAY
Affordable, quality plastic pump with European styling. Vertical plunger action, with a 4" spout. Material: Chrome. Capacity: 58 strokes/gal. Dimensions: 4"H. Cutout Size: 1 1/4". Clearance 9".
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
|
1-1, 907P+ from NAVIONICS, 20' Length from TAYLOR
|
|
Assorted Cruising Guides Atlantic and Mediterranean.
Part No: 0852884478
|
|
|
|
Home -> Books & Videos -> Books->Best-Seller Atlantic Cruising Guides
covers the waterways from Juan de Fuca Strait to Comox including Hornby and Denman and Lasqueti Islands.
Part No: PMP001
|
|
|
|
Home -> Electronics -> Global Positioning Systems->Platinum+ Charts
The most advanced technology and best imaging available in multi-dimensional charts provide high-resolution photo/charts overlay, full-view XGA panoramic pictures, improved 3D view, complete georeferenced coast pilots and FREE high-definition fishing detail all on the same chip.
Part No: CF/907P+
|
|
|
|
|
Home -> Electronics -> Global Positioning Systems->Platinum+ Charts
The most advanced technology and best imaging available in multi-dimensional charts provide high-resolution photo/charts overlay, full-view XGA panoramic pictures, improved 3D view, complete georeferenced coast pilots and FREE high-definition fishing detail all on the same chip.
Part No: SD/907P+
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Gull Sweep Gull Deterrent
Keep your decks clean with this proven bird deterrent! This large, 6' diameter, wind-driven rotator keeps gulls from roosting on hardtops, awnings, biminis, flying bridges, sail booms and decks—and eliminates the mess they create. Powered by the slightest breeze, its motion deters even the most determined bird. Installation is easy and so is removal whenever you want to use your boat. Folds in half for compact storage and includes Standard Two-Screw Mounting Block.
Part No: GULLSWEEP
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Anodized Aluminum Gull Wing Ladders
Staggered nylon steps on anodized aluminum vertical rails provide superior stability and easy boarding for swimmers carrying gear or divers with fins. Traction molded steps are comfortable and fold parallel in automatic unison for easy storage and deployment. Heavy-duty rated to 400lb. .
Part No: 19873:01
|
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Anodized Aluminum Gull Wing Ladders
Staggered nylon steps on anodized aluminum vertical rails provide superior stability and easy boarding for swimmers carrying gear or divers with fins. Traction molded steps are comfortable and fold parallel in automatic unison for easy storage and deployment. Heavy-duty rated to 400lb. .
Part No: 19874:01
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Gulper Shower Drain Kit
The smart way to handle gray water, this Sump/Pump Combo enables you to plumb all gray water hoses to one location. Eight inlet ports, each with two different dimensions permit a variety of hose sizes to be connected. Sump/Pump Combo includes an automatic float switch that activates a Gulper 220 pump which pumps gray water to one location—either a holding tank or overboard. Material: Polyethylene . Dimensions: Sump, including ports, not including pump: 13. 8"L x 10. 2"W x 6.
Part No: CK1512
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Gunnel Guards
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .
Part No: GG1.5HR.10
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Gunnel Guards
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .
Part No: GG1.5HR.20
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Gunnel Guard
Polyester-covered guards won't rot in the sun or saltwater like cotton guards. Use on boats, dinghies and swim platforms. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges.
Part No: GG1.53Q.10
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Gunnel Guards
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .
Part No: GG1.53Q.20
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Gunnel Guards
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .
Part No: GG1.5HR.CU
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Gunnel Guards
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .
Part No: GG1.53Q.50
|
|
|
|
Home -> Fishing -> Fishing Accessories->Bait & Fillet Tables
The one-piece design provides excellent drainage and maximum durability with no seams or cracks to trap bait or fish particles. Each table has raised side rails and includes three slots for knives and one slot for pliers storage. The deluxe rod holder mounting style includes a handy towel bar and side holsters for spray nozzles. All tables come complete—no additional mounting hardware required. Features: Raised rails, storage slots for knives, pliers . Material: High-density polypropylene .
Part No: 67505W
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
For use on pontoon boat side gates. Special vinyl sleeves between the first and second step protect the pontoon from damage. The overrail hooks snap into amounting sockets (included) suitable for temporary or permanent mounting. Made of durable 1''dia. aluminum tubing with comfortable white molded plastic steps. Hooks fold flat for compact storage. Four steps. 50''L. Hooks:13.
Part No: 15240:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps
Designed for small cruisers, runabouts and sailboats with unsual gunwales, where a standard ladder is not practical. the overrail hooks snap into mounting sockets (included) suitable for temporary or permanent mounting. Durable 1" dia.
Part No: 10049:01
|
|
|
|
Home -> Plumbing -> Bilge Pumps
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
Part No: BP3740
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK3528
|
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK3051
|
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: SK8813
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Gusher MKIII Cabinet-Mount Foot Pumps
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
Part No: GP0551
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Gusher MKIII Cabinet-Mount Foot Pumps
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
Part No: GP0550
|
|
|
|
Spares for the Whale Gusher Titan bilge pumps, containing: Qty Containing 2 Nut 2 Screw 1 Top clamping ring 1 Bottom clamping ring 4 Circlip.
Part No: AS4407
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Manual Bilge Pumps
This is a good manual bilge pump for small to medium-sized boats. Lightweight and sturdy, its easy lever action allows fast pumping. Easy to use and maintain, the handle can be oriented in any direction, and the diaphragm is quickly ac-cessed for removing debris. Stepped inlet/outlet nipples for either 1" or 1-1/2" hose connection. Pumps 11 g. p. m. per minute at 1" bore at 3' lift and 1. 5' head; 14-1/2 g. p. m.
Part No: BP9021
|
|
|
|
Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10241
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts -> Gifts & Specialty Items
From the Guy Harvey collection Redfish Luggage Tag .
Part No: 675-Y044
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware
Can Tee Koozie are T-Shirt shaped, shorter design for can drinks. Guy Harvey prints on polyester foam keep your bottle beverage cold and dry.
Part No: 457-Y043
|
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Parts->Service Kit for Guzzler Hand-Operated Diaphragm Pump
Service kit designed to repair "Guzzler" hand-operated diaphragm pumps includes the diaphragm and flapper valves.
Part No: SK-400-3400
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Guzzler Manual Bilge Pumps, 400 and 500
Guzzler 400 and 500 Bilge Pumps Capable of a 12' suction lift and a 12' delivery head. Surface-mount pumps include a fixed, horizontal handle. Thru-deck models include removable, vertical handle and thru-deck mounting plate with cover.
Part No: GH-400-H
|
|
|
