Brightside Pre-Kote, White, Gallon from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.

Cetol Marine - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.

VC - Tar Barrier Coat Epoxy - 1 Quart from INTERLUX
Excellent for use under VC17m and VC17m Extra This epoxy stops moisture from penetrating gel coat, wood or other porous surfaces. Whether sprayed (air or airless), rolled or brushed, the self-leveling characteristics provide a super-smooth surface for subsequent bottom paints. It can be applied at temperatures as low as 40°F, dries quickly and requires no sanding between coats, making it a great system for the do-it-yourself owner. 0 mils dry, 3. 1 mils wet . Drying Time: To touch: 2 to 6 hrs.

Interdeck Squall Blue - Quart from INTERLUX
Provides excellent slip resistance in a variety of colorsInterdeck provides an excellent slip-resistant finish with a tough polyurethane resin that protects decks against everyday wear and tear. Interdeck has a low-sheen finish to reduce sun glare. Available in White, Cream, Beige, Gray and Blue. Formulation: One-part polyurethane nonskid enamel . Application: Brush or roller . Number of Coats Recommended: One or two . Drying Time: At 73°F - To touch: 4 hrs. to 2 days; To walk on: 2 days .

VC 17m Extra with Biolux, Blue, Quart from INTERLUX
Teflon® additive reduces hull friction and drag and increases performance VC17m Extra’s thin film yields a super smooth racing finish that would normally take days of tiresome sanding. Now that’s easy! VC17m Extra contains metallic copper and Biolux Slime blocking technology to protect your boat from zebra mussels, teredo worms, weed, algae and slime fouling. Recommended Usage: Inland lakes, low fouling salt water areas; trailerables, dry-stored, racing boats; fiberglass, wood and steel hulls .

Premium Teak Restorer from INTERLUX
Premium Teak Restorer cleans and brightens teak in one step, revealing its natural color and the beauty of its grain. Will not harm varnish, paintwork or aluminum 16.

BOOTTOP PAINT, FLAG BLUE 1/2 Pint from INTERLUX
Durable coating resists abrasionA high-quality polyurethane finish that has been formulated for application to boottops and accent stripes. Excellent abrasion resistance and durability and ideal for use above the waterline. Contains Teflon® for easy cleaning, reduced waterline staining and added abrasion resistance. 1/2 Pint. Application: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two coats minimum. Drying Time: To touch - 1 to 3 hrs. ; To recoat - 8 to 16 hrs.

Perfection - Fighting Lady Yellow, Qt from INTERLUX
Simpler to use then other two-part polyurethane, Perfection has been formulated to enable amateur users to achieve professional quality results with ease on topsides superstructure and decks. Produces a finish with superb color and gloss retention and provides prolonged impact and abrasion protection-even on the highest wear areas. May be brushed, rolled, or sprayed over primed fiberglass, wood, aluminum, or steel. Base Formulation: Two-part linear polyurethane . Drying Time: To touch: 2 hrs.

Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.

Instant Black Streak Remover - 22oz. from STARBRITE
Just spray it on and wipe it off—that's all there is to it!Instantly removes black streaks caused by water runoff. Safe for use on fiberglass, metal and painted surfaces. Spray-on/wipe-off application requires no scrubbing. No harsh chemicals.

Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.

Hydrocoat Antifouling Paint, Black, Gallon from PETTIT
Mail-In Rebate Download Rebate Form (PDF) Easy-to-apply ablative fights bottom growth without build-up The ideal combination of high-speed performance and durability with environmental responsiveness. Hydrocoat is formulated with a 40% cuprous oxide and is tough enough to withstand frequent trailering, launching and beaching. Environmentally friendly Hydrocoat is used by Sea-Ray on all their new boats. Gallons only. Type: Water-based ablative . Biocide: 40% Cuprous Oxide . Additives: None .

Women's Board Short, Black, XL from AFTCO
Surf-inspired shorts of quick-drying, stain-resistant 100% nylon. Accented with contrast stitching and a Moorish Idol embroidered on the hem. Zippered side pockets. 8" inseam. Imported. Navy, Black.

Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.

Premium 6.6 Gallon Fuel Tank from MERCURY MARINE
6. 6 gallon (25L) capacity. Measures 19" (480mm) x 12. 5" (318mm) x 11. 125" (282mm). Fitted with 1/4-18 fuel line fitting and manually vented cap.