Fuel Filter/Water Separator, 30gph Max. Flow, 6.5"H x 3.2"W x 3.2"D, Metal Bowl from RACOR-PARKER FILTRAT
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .

Drain Fitting, 1-1/4" NPT, Straight from AMBASSADOR MARINE
Designed to fit 2-1/16" drain openings, these fittings feature mirror-polished, 304 stainless steel flanges. The slight downward slant of the Low-Profile 90° drain’s hose barb promotes better drainage and unlike some others, it fits standard 1"ID hose.

Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .

Flush Lock - Black, Offset Adjustable Cam Bar from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Offset Adjustable Cam Bar. Door thickness: 3/8" to 1 14". Face plate dimensions: 2 7/8" x 2 7/8". Adjustment latch bar: 3/8" to 3".

Cotter & Clevis Fastener Kit from WEST MARINE
A 66-piece assortment of cotter rings ranging from 3/8" to 7/8" diameter to fit clevis pins from 3/16" to 3/8"; cotter pins from 1/16" x 3/4" to 1/8" x 1-1/2"; and clevis pins from 3/16" x 3/4" to 3/8" x 1".

Fuel Hose, Type B-2 3/8" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.

Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.

Rub Rail Style #2, 1-7/8"H x 1-1/16"W x 50'L, Black/Black RR/Insert Color from TACO PRODUCTS
Excellent universal rub rail fits many different boat models. Flexible vinyl rub rail is easy to bend and provides a soft cushioning effect against normal bumps from pilings and docks. It’s easy to install using basic tools and comes in a continuous coil for seamless application. Includes rub rail (in a continuous coil for one-piece installation without seams) insert, end caps, screws (matching for colored rub rail) and installation guide. Installation DVD included.

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Sail Slide, 5/8", Package of 2 from BAINBRIDGE INTERNATI
These nickel alloy and stainless steel slides are used on most boats with external mast tracks. For 5/8" and 7/8" track.

5/8" Clevis Pin dia., 1-3/16" inside dia., 4-pack from WEST MARINE
Stainless-Steel Cotter Rings.

2"NPT dia., 2-1/4" Straight Full-Flow Tailpiece from GROCO
Offered in full- or standard-flow designs. The cast hex nut facilitates installation. Generous seating area for double clamping.

AFI-1000 110° Wiper Motor Only
Fully sealed, waterproof housing from UV-stabilized thermoplastic for inside or outside mounting. 12V heavy duty motor with knurled anti-rotation drive shaft and RF-shielded circuitry. 75 lbs. Maximum 18" x 18" arm and blade. AFI 1000 Wiper Kit 37100 includes 37180 motor with 2 1/2" shaft, Deluxe adjustable 10"-14" wiper arm and 14" wiper blade. Separate AFI-1000 motors offer either 110° or 80° sweep range. Sweep Direction: Left or Right.

Rule-Mate 1100; Draw: 3.3A @ 12V DC, Port: 1 1/8", Dimensions: 4"H x 5"L x 2 1/2"D from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.

Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.