Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Water Circulating Pump - #18-3599 - Volvo #3851982-3, 3853850; Mercruiser #811841, 850399, 850399-1 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Lower Unit Seal Kit from SIERRA
Sierra 18-2623 OMC Gear Housing Seal Kit.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
|
|
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
|
|
Prop Nut Kit, Yamaha 40-50HP from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
|
Impellerkt from SIERRA, Impeller, 9 from SIERRA, E from SIERRA
|
|
Home -> Engine Systems -> Engine Parts
Impeller-Kit EFI 25hp|Impeller-Kit EFI 25hp.
Part No: 853792A07
|
|
|
|
Home -> Engine Systems -> Engine Parts->Impeller Repair Kits for Outboards
WATER PUMP.
Part No: 18-3401
|
|
|
|
Home -> Engine Systems -> Engine Parts->Impeller Repair Kits
Includes impeller, rubber seal(s), impeller plate, impeller gasket(s), and O-rings.
Part No: 18-3148
|
|
|
|
Home -> Engine Systems -> Engine Parts
For Jabsco engine cooling flexible impeller pedestal pump: 2620-0001 2620-0051 2620-1001 Includes O-Ring, Impeller (with drive screw) and Shaft Seal.
Part No: 90020-0001
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Impellers
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
Part No: 18-3011
|
|
|
|
Home -> Engine Systems -> Engine Parts->Impeller Repair Kits for Outboards
IMPELLER-J/E.
Part No: 18-3043
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Impellers
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.
Part No: 1210-0001-P
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Impellers
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.
Part No: 13554-0001-P
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Impellers
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.
Part No: 17018-0001-P
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Impellers
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.
Part No: 17255-0003-P
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Impellers
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
Part No: 18-3001
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Impellers
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
Part No: 18-3056
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Impellers
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
Part No: 18-3062
|
|
|
|
Home -> Engine Systems -> Engine Parts->Yamaha Impellers
Impellers are the heart of the water pump within a cooling system in an I/O or O/B application. They pump fresh water, via lake, river, etc. , circulate it through the engine and then expel it back into the body of water. These impellers are made of nitryl or neoprene rubber. Most have a brass insert to eliminate corrosion problems.
Part No: 18-3068
|
|
|
|
Home -> Engine Systems -> Engine Parts->Yamaha Impellers
Impellers are the heart of the water pump within a cooling system in an I/O or O/B application. They pump fresh water, via lake, river, etc. , circulate it through the engine and then expel it back into the body of water. These impellers are made of nitryl or neoprene rubber. Most have a brass insert to eliminate corrosion problems.
Part No: 18-3069
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Impellers
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
Part No: 18-3071
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Impellers
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
Part No: 18-3082
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Impellers
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
Part No: 18-3091
|
|
|
|
IMPELLER.
Part No: 18-3094
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Parts for Manual Heads
.
Part No: 37006-0000
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller Kit|**Impeller Kit.
Part No: 18-3077D
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller Kit|**Impeller Kit.
Part No: 18-3242
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller Kit|**Impeller Kit.
Part No: 18-3277
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller Kit|**Impeller Kit.
Part No: 18-3080D
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller Kit|**Impeller Kit.
Part No: 18-3216
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller Kit|**Impeller Kit.
Part No: 18-3079D
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller Kit|**Impeller Kit.
Part No: 18-3244
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller Kit|**Impeller Kit.
Part No: 18-3203
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller Kit|**Impeller Kit.
Part No: 18-3201
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Impeller Kit|**Impeller Kit.
Part No: 18-30777
|
|
|