Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Lower Unit Seal Kit from SIERRA
Sierra 18-2623 OMC Gear Housing Seal Kit.
|
Water Circulating Pump - #18-3599 - Volvo #3851982-3, 3853850; Mercruiser #811841, 850399, 850399-1 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
|
Tab Assembly from DAVIS INSTRUMENTS
Use these replacement parts for all Windex Wind Indicators.
|
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
Trim Tab Position Indicator from BENNETT MARINE
Know the position of your trim tabs! As durable as it is elegant, the Bennett Tab Positon Indicator (TPI) accurately indicates the position of each trim tab adding precision and confidence to trim tab operation. They are easily retrofitted to existing Bennett Trim Tabs, and can be adapted to Boat Leveler brand Instatrim systems. The TPI2000 keeps you fully informed for maximum efficiency, performance, and total control of your trim tab system For use with all Bennett Trim Tab Systems .
|
Windex 15 Wind Indicator from DAVIS INSTRUMENTS
Improved with bird-proof spike Super-sensitive to slight changes in wind direction at the masthead, Windex Wind Indicators are popular around the world because they offer such an exceptional value. They feature sapphire jewel suspension bearings, large fin/low inertia vanes and easy-to-read, fully adjustable tacking-tab system for quick reference. The choice for most sailors, the Windex 15 features a 15" vane and reflectors for high visibility day and night.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
|
|
|
2X from, L from, M from, XL from, Indicator from SIERRA
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->IN7J Inshore Sport Jacket
Lightweight jacket looks good onboard or in town Casual multi-purpose performance jacket offers lightweight protection that feels good and looks good in town, on the trail and onboard. A good choice for warm weather boaters who are looking for breathable, waterproof protection that won't slow them down. It's made of a highly breathable two-layer laminate material with a Teflon durable water-resistant finish and fully taped seams to keep you dry. Internal zip pocket and cargo pocket. Imported.
Part No: SILVER/DARK GREY-2X
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->IN7J Inshore Sport Jacket
Lightweight jacket looks good onboard or in town Casual multi-purpose performance jacket offers lightweight protection that feels good and looks good in town, on the trail and onboard. A good choice for warm weather boaters who are looking for breathable, waterproof protection that won't slow them down. It's made of a highly breathable two-layer laminate material with a Teflon durable water-resistant finish and fully taped seams to keep you dry. Internal zip pocket and cargo pocket. Imported.
Part No: SILVER/DARK GREY-L
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->IN7J Inshore Sport Jacket
Lightweight jacket looks good onboard or in town Casual multi-purpose performance jacket offers lightweight protection that feels good and looks good in town, on the trail and onboard. A good choice for warm weather boaters who are looking for breathable, waterproof protection that won't slow them down. It's made of a highly breathable two-layer laminate material with a Teflon durable water-resistant finish and fully taped seams to keep you dry. Internal zip pocket and cargo pocket. Imported.
Part No: SILVER/DARK GREY-M
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->IN7J Inshore Sport Jacket
Lightweight jacket looks good onboard or in town Casual multi-purpose performance jacket offers lightweight protection that feels good and looks good in town, on the trail and onboard. A good choice for warm weather boaters who are looking for breathable, waterproof protection that won't slow them down. It's made of a highly breathable two-layer laminate material with a Teflon durable water-resistant finish and fully taped seams to keep you dry. Internal zip pocket and cargo pocket. Imported.
Part No: SILVER/DARK GREY-XL
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replaces: Chrysler E9234M Chrysler Big Block V8 383-440cu. in. (All Models except 413"E" with offset bolt pattern) Use with: Manifold: 18-1915. Elbow Gasket: 18-0471.
Part No: 18-1948
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
Inboard Engine Flusher Moeller Part # 099081-00.
Part No: 099081-00
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replaces: Jabsco 18838-0001. Sherwood 9959K with 18-3060 Impeller Sherwood 9959. Crusader 1003062.
Part No: 18-3046
|
|
|
|
Home -> Engine Systems -> Engine Parts
Inboard Gear Reduction Starter Replaces: 872241-5 Permanent Magnet, 12 Volt CW Rotation Aluminum Pinion Housing w/2 Threaded Mounting Holes Fits : Volvo Penta 4 Cylinder and 6 Cylinder Gas Engines.
Part No: 18-6292
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Pipe-Light Trailer Lights
Convenient Trailer Lights insert onto your existing 2" PVC trailer guide-ons for fast, easy installation. Pipe-Lights last longer and offer better visibility because they are higher up than standard trailer lights and they don't get submerged during launching and loading. Amber reflective tape on light housing aids in backing trailer at night. Each kit contains one pair of Pipe-Lights with 10' wire leads and wire connectors for easy installation.
Part No: 1018
|
|
|
|
Home -> Electrical -> Interior Lighting
White molded plastic Spade connection Snap-on front cover conceals mounting screws Diffusion lens Flush mounting Easy installation.
Part No: 1044DP1WHT
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-Backlash Indicator|**Tool-Backlash Indicator.
Part No: 18-9850
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Indicator-Oil|**Indicator-Oil.
Part No: 18-8369
|
|
|
|
Home -> Watersports -> Wakeboards, Kneeboards, Skis & Towables -> Pool/Lake/River
Designed for maximum comfort and support, with a double-walled nylon outer coating and airtight PVC bladder inside. Special link fittings allow you to join multiple Infinity Floats together, side-by-side or face-to-face. Features: Inflatable comfort pillow. Removable bladder for easy repair or replacement.
Part No: U401BLU-00-000
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Safe for use on your inflatable boatSpecially developed for all butyl, hypalon, rubber and vinyl boats and surfaces. Quickly removes oxidation, grease and dirt. Retards dulling and cracking and slows down the aging process of inflatable boats. Removes marks from tar, diesel oil and the soles of shoes. Also great for cleaning fenders and ensures that the surfaces do not become sticky in the sun. 16oz.
Part No: SIBC-1
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Heavy duty formula removes dirt, grime, scuff marks, oxidation and stains from rubber and vinyl. Provides UV protection. . 16oz.
Part No: 083416
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
Part No: 411184008
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Environmentally safe and biodegradable, this cleaner is formulated to remove dirt, bird droppings, oil, grease, and other deposits from Hypalon® and PVC boats, restoring them to a “like new” look. 16oz.
Part No: M3716
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.
Part No: 13002:01
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Our sealant finds leaks too small to find! Positively seals pinhole leaks that are too small to identify and patch. Inject into valve and then tumble boat to distribute inside the tube.
Part No: WMINF
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Inflatable Boat Seats.
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Air Arch Inflatable Boom Tents
Rain, hail or shine. the new Ronstan Inflatable Boom Tent will keep you protected from the elements. The range includes four size options, to cater for yachts from 25ft. (7. 5m to 14m). The Inflatable Boom Tent has a unique arch shape courtesy of inflatable struts, maximizing the available cockpit space compared to normal boom tents. Made for durability with heavy-duty UV-resistant acrylic and water repellent rip-stop nylon. Light and compact. Unique arch shape provides more cockpit space.
Part No: RF3925-30
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Air Arch Inflatable Boom Tents
Rain, hail or shine. the new Ronstan Inflatable Boom Tent will keep you protected from the elements. The range includes four size options, to cater for yachts from 25ft. (7. 5m to 14m). The Inflatable Boom Tent has a unique arch shape courtesy of inflatable struts, maximizing the available cockpit space compared to normal boom tents. Made for durability with heavy-duty UV-resistant acrylic and water repellent rip-stop nylon. Light and compact. Unique arch shape provides more cockpit space.
Part No: RF3930-35
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Air Arch Inflatable Boom Tents
Rain, hail or shine. the new Ronstan Inflatable Boom Tent will keep you protected from the elements. The range includes four size options, to cater for yachts from 25ft. (7. 5m to 14m). The Inflatable Boom Tent has a unique arch shape courtesy of inflatable struts, maximizing the available cockpit space compared to normal boom tents. Made for durability with heavy-duty UV-resistant acrylic and water repellent rip-stop nylon. Light and compact. Unique arch shape provides more cockpit space.
Part No: RF3935-40
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Air Arch Inflatable Boom Tents
Rain, hail or shine. the new Ronstan Inflatable Boom Tent will keep you protected from the elements. The range includes four size options, to cater for yachts from 25ft. (7. 5m to 14m). The Inflatable Boom Tent has a unique arch shape courtesy of inflatable struts, maximizing the available cockpit space compared to normal boom tents. Made for durability with heavy-duty UV-resistant acrylic and water repellent rip-stop nylon. Light and compact. Unique arch shape provides more cockpit space.
Part No: RF3940-45
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Motor mount for Fish Master and Fish Hunter dinghies Allows you to mount a small gasoline or electric motor on your inflatable dinghy. Made of marine plywood and stainless steel.
Part No: U102ACC-00-000
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories
Rafts and lounges are fun but none provide stability on the water like this revolutionary platform. It’s strong enough to use as a deck with tables and chairs and versatile enough to function as a swim platform for diving, a dock for wakeboarding or place to tie up your personal watercraft. Dock includes a 360° marine-grade rope handle with 16 reinforced attachment points to simplify water entries. Includes: Custom carry bag. High-pressure air pump with gauge and repair kit. 7'8"sq.
Part No: 93000
|
|
|
|
Home -> Safety -> Life Jackets -> Recreational Life Jackets->Offshore Inflatable Life Vest with LIFT & Auto Hydrostatic Inflator
Offering state-of-the-art inflatable technology, this vest’s hydrostatic inflator must be submerged in 4" of water for the PFD to automatically inflate, eliminating the chances of accidental inflation. of buoyancy and up to 9" of freeboard, one of the highest elevations out of water ever seen in a PFD. Inflator replacement date and inflator status are easily viewed through the safety inspection window—green indicates ready for use. Comfortable neoprene collar, cool mesh back.
Part No: MD0451-RD/BK
|
|
|
|
Home -> Safety -> Life Jackets -> Recreational Life Jackets->Offshore Inflatable Life Vest with LIFT & Auto Hydrostatic Inflator
Offering state-of-the-art inflatable technology, this vest’s hydrostatic inflator must be submerged in 4" of water for the PFD to automatically inflate, eliminating the chances of accidental inflation. of buoyancy and up to 9" of freeboard, one of the highest elevations out of water ever seen in a PFD. Inflator replacement date and inflator status are easily viewed through the safety inspection window—green indicates ready for use. Comfortable neoprene collar, cool mesh back.
Part No: MD0450
|
|
|
|
Home -> Safety -> Life Jackets->Commercial Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .
Part No: 1470BLK-00-000
|
|
|
|
Home -> Safety -> Life Jackets->Commercial Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .
Part No: 1470ORG-00-000
|
|
|