Welcome! Please Sign-In
Top Sellers
White Life Seal Sealant, 2.8oz. Tube from BOAT LIFE
White Life Seal Sealant, 2.8oz. Tube from BOAT LIFE
Better adhesion than silicone—and can be removed without damage to gel-coats Polyurethane and silicone formulated for use on fiberglass. It gives measurably better adhesion than silicone and yet, unlike most polyurethanes, can be removed without damage to gel coats. Fast-curing, low-odor, high-adhesion, non-corrosive and non-sagging. Recommended Usage: Fiberglass, vinyl, ABS, Lexan, metal, glass, wood; above or below water . Cure Time: Tack-free: 20 min. ; Complete cure: 24–36 hrs.
Liquid Life-Calk Sealant - Black, 3 OZ from BOAT LIFE
Liquid Life-Calk Sealant - Black, 3 OZ from BOAT LIFE
Low-viscosity caulk/sealant fills cracks and seamsLow-viscosity version of Life-Calk. Formulation: Low-viscosity polysulfide caulking/sealant . Recommended Usage: Fine cracks and seams; fiberglass, wood, metal, glass. Material Incompatibilities: Glass to vinyl; ABS, Lexan; plastic hardware to fiberglass, wood. Adhesion Rating: Tensile adhesion: 80 ps. ; ultimate elongation: 200%. Cure Time: Tack free: 24 hrs; Complete cure: 10 to 20 days. Cleanup: Life-Calk Solvent. Quantity: 3oz. tubes.
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
Git Rot Penetrating Epoxy - 32 OZ Kit from BOAT LIFE
Git Rot Penetrating Epoxy - 32 OZ Kit from BOAT LIFE
Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores. Coverage: Volume required for saturation—about half the volume of rotted wood.
Coastal Comfort Inflatable Life Vest, Manual from WEST MARINE
Coastal Comfort Inflatable Life Vest, Manual from WEST MARINE
Enjoy unrestricted movement on the water! Designed for inshore or coastal boating, our new Comfort Series™ Inflatable Vests have a more streamlined and lightweight fit. These compact vests feature a thin profile that won't inhibit your movement and they offer 22. Each vest has 1" chest webbing, a high-tenacity nylon covering and Delrin buckle. All vests have heat-welded yellow chambers that provide 22. Include D-ring, back-up oral inflation tube, one arming cylinder and pin.
Inflatable Life Vest, Orange from Ultra 4000 Manual/Automatic Inflatable Life Vest
Inflatable Life Vest, Orange from Ultra 4000 Manual/Automatic Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .
Inflatable Boat Ladder from GARELICK
Inflatable Boat Ladder from GARELICK
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.
Inflatable Life Vest, Black from Ultra 4000 Manual/Automatic Inflatable Life Vest
Inflatable Life Vest, Black from Ultra 4000 Manual/Automatic Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
Deck Mate 25 Boat Anchor Windlass from POWERWINCH
Deck Mate 25 Boat Anchor Windlass from POWERWINCH
Compact, deck-mounted windlass has power up/free-fall down capabilities and includes a built in light for added convenience. With low power draw and free fall deployment, this anchor winch puts less stress on your battery for longer battery life. Its small footprint takes up less deck space to mount and the spur gear train allows fast retrieval speeds and minimal current draw. Gear feature prevents rope from over running during anchor deployment. Style: Horizontal . Boat Length: Up to 25'' .
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
Orpine Boat Soap, Quart from ORPIN
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
3-IN-1 Boat Hook from SHURHOLD PRODUCTS
3-IN-1 Boat Hook from SHURHOLD PRODUCTS
Convert your Shurhold pole to a paddle or boathookUse thse accessories with Shurhold's "one-pole-does-it-all system. Boat Hook has line-carrying feature, centered push-off and basic boat hook. Paddle features Shur-Lok quick-release adapter and is a great safety item for any boat.
81cm Fiberglass Seat for RIB 350 Inflatable Boat from WEST MARINE
Gunwale Mount Pontoon Ladder, 4 Step from GARELICK
Gunwale Mount Pontoon Ladder, 4 Step from GARELICK
For use on pontoon boat side gates. Special vinyl sleeves between the first and second step protect the pontoon from damage. The overrail hooks snap into amounting sockets (included) suitable for temporary or permanent mounting. Made of durable 1''dia. aluminum tubing with comfortable white molded plastic steps. Hooks fold flat for compact storage. Four steps. 50''L. Hooks:13.
Boat Covers

Select your boat manufacturer:

Please Choose a Model Year:   

Cartridge from BOAT LIFE, Tube from BOAT LIFE

Letter/Number Kit - White, 3" H from HARDLINE PRODUCTS SR Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->3" Boat Letter/Number Kits
Attractive faded and nonfaded colors that are easy to applyKits include multiple sets of 3"H, self-adhesive letters and numbers to match the graphics of many boats, including bright PWC colors. Four of each letter and number for a total of 144 pieces in the kit. Match the graphics of many boats. Four of each letter and number.
Part No: WHI350EC
Letter/Number Kit - White/Black Faded, 3" H from HARDLINE PRODUCTS SR Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->3" Boat Letter/Number Kits
Attractive faded and nonfaded colors that are easy to applyKits include multiple sets of 3"H, self-adhesive letters and numbers to match the graphics of many boats, including bright PWC colors. Four of each letter and number for a total of 144 pieces in the kit. Match the graphics of many boats. Four of each letter and number.
Part No: WHBKG200
Letter/Number Kit - Yellow/Purple, 3" H from HARDLINE PRODUCTS SR Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->3" Boat Letter/Number Kits
Attractive faded and nonfaded colors that are easy to applyKits include multiple sets of 3"H, self-adhesive letters and numbers to match the graphics of many boats, including bright PWC colors. Four of each letter and number for a total of 144 pieces in the kit. Match the graphics of many boats. Four of each letter and number.
Part No: YEPUG200
Letter/Number Kit, Black/Kiwi, 3"H from HARDLINE PRODUCTS SR Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->3" Boat Letter/Number Kits
Attractive faded and nonfaded colors that are easy to applyKits include multiple sets of 3"H, self-adhesive letters and numbers to match the graphics of many boats, including bright PWC colors. Four of each letter and number for a total of 144 pieces in the kit. Match the graphics of many boats. Four of each letter and number.
Part No: BLKKI200
LetterU - White, 3" from HARDLINE PRODUCTS SR Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->3" Registration Letters and Numbers
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
Part No: 3-SCW-P-U
LeTube from O BRIEN Home -> Watersports -> Wakeboards, Kneeboards, Skis & Towables
This tube features hot graphics and a durable nylon cover. Four foam handles offer a comfortable grip, while the separate air chambers provide extra security. Quick-connect towing hook allows fast tow rope connection. Covered Boston valve for quick inflation and deflation Material: PVC tube w/durable nylon cover . Number Of Chambers: Two . Valve Type: One Boston valve . Dimensions: 56"dia. . Accommodations: Four foam handles . Towing Attachment: Quick-connect towing hook .
Part No: 2081505
Lev-O-Gage Clinometer - Standard, 45-0-45 Degrees, 3.5" width from SUN COMPANY Home -> Sailboat -> Rigging Products -> Wind Instruments->Lev-O-Gage Clinometers
The perfect device for attaining an optimum angle of heel. Black bodies with flex tubes and white engraved numerals and an easy-to-read scale.
Part No: 7301-C
Lev-O-Gage Clinometer, II, 10-0-10 degrees, 3.5" width from SUN COMPANY Home -> Sailboat -> Rigging Products -> Wind Instruments->Lev-O-Gage Clinometers
The perfect device for attaining an optimum angle of heel. Black bodies with flex tubes and white engraved numerals and an easy-to-read scale.
Part No: 307-M
Lev-O-Gage Senior, 50-0-50 Degrees, 6.44" width from SUN COMPANY Home -> Sailboat -> Rigging Products->Lev-O-Gage Clinometers
The perfect device for attaining an optimum angle of heel. Black bodies with flex tubes and white engraved numerals and an easy-to-read scale.
Part No: 303-M
Lever from SIERRA Home -> Engine Systems -> Control Systems
**Shift Lever|**Shift Lever.
Part No: 18-3762
Lever-Operated Off/On Switch from COLE HERSEE Home -> Electrical -> Batteries & Accessories
175A continuous/800A intermittent rating. 3/8” brass terminals. Includes face plate which indicates position of the M284 switch.
Part No: M-284-09-BP
LI-ON Battery HX460S from STANDARD HORIZON Home -> Electronics -> VHF Radios & Communications->Standard Horizon Handheld VHF Accessories
.
Part No: FNB-80LI
Liberty 2500 Windlass from MAXWELL Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses
Innovative rope/chain windlass technology and classic, open styling make these windlasses ideal for larger boats. High-performance components include a balanced forced pressure arm couled with a unique chain wheel designed to grip the rope/chain splice. The Liberty offers the option of efficient manual operation at a 5:1 ratio with the flick of a switch. A convenient release button on top allows for periodic servicing without the need for tools. Working load limit: 2200lbs. - chain, 49'/min.
Part No: RC250012V
LID for 2.5QT Bucket from ENCORE PAINT Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Rags, Gloves And Buckets->Mix & Measure Cups
Graduated markings make mixing easyTranslucent plastic cup, graduated in ml. and oz. Suitable for mixing paint, epoxy and polyester resins.
Part No: 61000
LID for 5QT Bucket from ENCORE PAINT Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Rags, Gloves And Buckets->Mix & Measure Cups
Graduated markings make mixing easyTranslucent plastic cup, graduated in ml. and oz. Suitable for mixing paint, epoxy and polyester resins.
Part No: 80900
LID for PINT/QT Bucket from ENCORE PAINT Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Rags, Gloves And Buckets->Mix & Measure Cups
Graduated markings make mixing easyTranslucent plastic cup, graduated in ml. and oz. Suitable for mixing paint, epoxy and polyester resins.
Part No: 41000
Lid Gasket, 500 Series from RACOR-PARKER FILTRAT Home -> Engine Systems -> Engine Parts->Parts for 500, 900 & 1000 Turbine Series Filters
Parts for 500, 900 and 1000 Turbine Series Filters.
Part No: 15005
Lid Only with Hinge (No Handle) for West Marine 200SS Propane Kettle Barbecue from MAGMA PRODUCTS Home -> Cabin & Galley -> Barbecues & Tables
Replacement lid for West Marine 200SS Propane Kettle Barbecue; does not include hinge.
Part No: 10-753
Lid Support Spring, 5/8” x 12”L from T-H MARINE Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Lid Support Spring
Now it's easy and inexpensive to keep hatches, cooler lids, and dock boxes open. Stainless steel springs move to support position when opened, holding up lid, hatch or cover. Bend the spring to release support and close. . Molded black nylon ends for mounting. Stainless steel retaining cable in center of spring provides added strength.
Part No: HS-1C-DP
Lid Support Spring, 7/16” x 8 1/2”L from T-H MARINE Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Lid Support Spring
Now it's easy and inexpensive to keep hatches, cooler lids, and dock boxes open. Stainless steel springs move to support position when opened, holding up lid, hatch or cover. Bend the spring to release support and close. . Molded black nylon ends for mounting. Stainless steel retaining cable in center of spring provides added strength.
Part No: LS-2C-DP
Life Jacket Organizer Bag from WEST MARINE Home -> Safety -> Life Jackets
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
Part No: SG-18
Life Ring Letter Kit from TAYLOR Home -> Safety -> Man Overboard Gear -> Type IV PFD's
Now you can customize your life ring with our Taylor Made Lettering kit. Package includes 2" black letters and numbers (4 ea. ) plus symbols. Constructed from waterproof marine-grade 4 mil. vinyl, resistant to fuel, chemicals fading and scratching.
Part No: 600015
Life Saver Buoy Rearming Kit from WEST MARINE Home -> Safety -> Life Jackets
Life Saver Buoy Rearming Kit Style: Automatic. Cylinder Weight: 265g. Cylinder Neck Diameter: 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: Life Saver Buoy. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
Part No: V85000-89265
Life Seal Sealant from BOAT LIFE Home -> Paint & Maintenance -> Caulking & Adhesives
Better adhesion than silicone—and can be removed without damage to gel-coats Polyurethane and silicone formulated for use on fiberglass. It gives measurably better adhesion than silicone and yet, unlike most polyurethanes, can be removed without damage to gel coats. Fast-curing, low-odor, high-adhesion, non-corrosive and non-sagging. Recommended Usage: Fiberglass, vinyl, ABS, Lexan, metal, glass, wood; above or below water . Cure Time: Tack-free: 20 min. ; Complete cure: 24–36 hrs.
Life-Calk Polysulfide Primer - 8 OZ from BOAT LIFE Home -> Paint & Maintenance -> Caulking & Adhesives
Promotes adhesion of Life-Calk to oily woodsPromotes adhesion of Life-Calk to oily woods such as teak. Fast-drying formula allows priming and caulking the same day. 8oz. Promotes adhesion of Life-Calk to oily woods. Fast-drying formula. Prime and caulk on the same day. Clean up with Life-Calk Solvent.
Part No: 1059
Life-Calk Sealant, Black, 10.6oz. Cartridge from BOAT LIFE Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Life-Calk® Sealant
Versatile adhesive sealant One-part, thiokol-based polysulfide sealant cures to a positive waterproof seal. No priming required except on oily woods such as teak. Formulation: One-part polysulfide caulking/sealant . Recommended Usage: Fiberglass, wood, metal, glass; above and below water . Material Incompatibilities: Not recommended for glass to vinyl, ABS/Lexan, plastic hardware to fiberglass/wood . Adhesion Rating: Tensile: 80 psi; ultimate elongation 200% . Cure Time: Tack-free: 24 hrs.
Part No: 1034
Life-Calk Sealant, Black, 2.8oz. Tube from BOAT LIFE Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Life-Calk® Sealant
Versatile adhesive sealant One-part, thiokol-based polysulfide sealant cures to a positive waterproof seal. No priming required except on oily woods such as teak. Formulation: One-part polysulfide caulking/sealant . Recommended Usage: Fiberglass, wood, metal, glass; above and below water . Material Incompatibilities: Not recommended for glass to vinyl, ABS/Lexan, plastic hardware to fiberglass/wood . Adhesion Rating: Tensile: 80 psi; ultimate elongation 200% . Cure Time: Tack-free: 24 hrs.
Part No: 1031
Life-Calk Sealant, Teak, 10.6oz. Cartridge from BOAT LIFE Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Life-Calk® Sealant
Versatile adhesive sealant One-part, thiokol-based polysulfide sealant cures to a positive waterproof seal. No priming required except on oily woods such as teak. Formulation: One-part polysulfide caulking/sealant . Recommended Usage: Fiberglass, wood, metal, glass; above and below water . Material Incompatibilities: Not recommended for glass to vinyl, ABS/Lexan, plastic hardware to fiberglass/wood . Adhesion Rating: Tensile: 80 psi; ultimate elongation 200% . Cure Time: Tack-free: 24 hrs.
Part No: 1036
Life-Calk Sealant, Teak, 2.8oz. Tube from BOAT LIFE Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Life-Calk® Sealant
Versatile adhesive sealant One-part, thiokol-based polysulfide sealant cures to a positive waterproof seal. No priming required except on oily woods such as teak. Formulation: One-part polysulfide caulking/sealant . Recommended Usage: Fiberglass, wood, metal, glass; above and below water . Material Incompatibilities: Not recommended for glass to vinyl, ABS/Lexan, plastic hardware to fiberglass/wood . Adhesion Rating: Tensile: 80 psi; ultimate elongation 200% . Cure Time: Tack-free: 24 hrs.
Part No: 1037
Life-Calk Sealant, White, 10.6oz. Cartridge from BOAT LIFE Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Life-Calk® Sealant
Versatile adhesive sealant One-part, thiokol-based polysulfide sealant cures to a positive waterproof seal. No priming required except on oily woods such as teak. Formulation: One-part polysulfide caulking/sealant . Recommended Usage: Fiberglass, wood, metal, glass; above and below water . Material Incompatibilities: Not recommended for glass to vinyl, ABS/Lexan, plastic hardware to fiberglass/wood . Adhesion Rating: Tensile: 80 psi; ultimate elongation 200% . Cure Time: Tack-free: 24 hrs.
Part No: 1033
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11