Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.

Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).

Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.

"Little" Crane, 175 lb. Capacity, 30" Arm Reach, 7:1 Purchase, 75' Line Length from ST. CROIX MARINE
Precision engineered and fabricated from stainless steel, these removable cranes lift heavy loads with ease. Best of all, it takes just 20 seconds to set up or remove for storage. Optional spare mounting kits (VPN #176 & 196) include a set of brackets and rail clamps for an extra mounting location. Material: Polished stainless steel. Height: 60" mast height. Mounting Style: Horizontal or vertical mounting to railing. Included Equipment: Complete kit with mounts and 5/16" line.

Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.

Thru-Deck Mark V Manual Sanitation Pump from WHALE PUMPS
Reliable, high-capacity pumps for emptying holding tanks, bilges, gray water tanks, etc. Nitrile diaphragms ensure long service life. Offered in Surface-Mount and Universal configurations. Universal design may be surface- or thru-deck mounted—and when mounted thru-deck requires Deck Plate with Ring Kit (Model 182438) to complete installation. 16gpm capacity. Use 1. 5" hose. Type: Manual Diaphragm, bulkhead or thru-deck models . GPM: 14. 75 . Macerates: No .

CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.

Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.

Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.

Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.

For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.

Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.

Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.

12V Blaster Washdown Pump, 3.5 GPM from SHURFLO
Blast the grimiest decks clean with one of these durable freshwater/saltwater pumps. Positive-displacement three/four chamber diaphragm design is self-priming up to 6' and can run dry without damage. Include 3/4" and 5/8" garden hose adapters. Pro Blaster features higher capacity and a seamless motor shell for enhanced protection in saltwater environments. Suitable for mounting in wet locations. Include fittings and Blaster spray nozzle. Switch Type: Sealed 45psi pressure switch .

Guzzler 500 Surface Mount Bilge Pump from GUZZLER/BOSWORTH
Guzzler 400 and 500 Bilge Pumps Capable of a 12' suction lift and a 12' delivery head. Surface-mount pumps include a fixed, horizontal handle. Thru-deck models include removable, vertical handle and thru-deck mounting plate with cover.