Raw Water Strainer-1 1/2 Inch from FORESPAR
6. 3" dia. strainer features high-strength, corrosion-free Marelon housing, easily removable stainless-steel basket and clear polycarbonate lid for easy inspection. Flow rate is 40gpm. Threaded intake and exit ports are 1 1/2" NPT. 6.

Marelon Diverter Valve, 1-1/2" Hose Diameter from FORESPAR
Made of durable, corrosion-resistant composite material that is not subject to electrolysis, this valve is engineered to exceed ABYC and ISO standards. 120° movement operates valve. Positive stops between positions. 1-1/2"W x 3-1/4"H.

Chain Plate, 1-1/2"W x 14"L, 1/2" Hole Diameter from SCHAEFER
1" and 1-1/4" sizes are flat with four fastener holes. 1 1/2" size is formed (bent) with five fastener holes. Type 304 stainless-steel.

Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.

Genoa Track Slide, Fits 1-1/4" T-Track from RONSTAN
Ronstan’s stainless steel slides come with tough plastic inserts which keep the car from scarring the track, while making it easier to move the car. Spring-loaded adjustment pins for fast, positive positioning . Semicircular bails . Slides for 1" track are typically used on boats to 26' . Slides for 1-1/4" track are typically used on boats to 40' .

Swim Grid Outboard Motor Bracket from FULTON
For motors to 10 hp or 75 lb. Anodized marine aluminum alloy. 1 1/2'' polypropylene mounting board.

Acetal Thru-Transom Scupper from WEST MARINE
Attwood Acetal Thru-transom Scupper One-way rubber flapper valve and thru-hull fitting. For use with 1 1/2'' ID hose. Overall length: 6 1/4'' Installation hole size: 2' Max.

Push Together Scupper from T-H MARINE
Snap-lock mating ribs pieces together for a secure installation. The male portion can be shortened, to accommodate thinner hulls. For hulls from 1 1/2" to 3 5/8". Installs in 1 7/8" hole. Flange O. D. : 2 15/16".

Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".

Replacement Hook with Retainer from RWO
If a trapeze boat capsizes and turtles and the crew is clipped onto the wire, the new QRH hook can be released with a simple pushbutton, freeing the trapped sailor. Created in response to fatal accidents, the QRH system has been tested for three years by experts, racers, and sailing beginners under all racing condtions. Quick-release harness systems will be required equipment under the Racing Rules of Sailing beginning in 2006. Made from all stainless steel. Fits 1 1/2" webbing. .

CP Zinc Butt Hinge - 1.5" H x 1.5" W from PERKO
Chrome plated zinc alloy. Pin Height: 1-1/2" by 1-1/2" open width. Each hinge required four #8 fasteners.

Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .

U-Bolt - 5/16" x 2" from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-Bolt. Includes backing plate. Dimensions - Stock diameter - Thread length - Hole Spacing - Eye Diameter 5/32" - 1 3/8" - 1 3/16" - 1". 1/4" - 1 1/4" - 1 5/16" - 1 1/16". 1/4" - 1 7/8" - 1 5/16" - 1 1/16". 5/16" - 1 3/8" - 1 1/4" - 1".

Toilet Waste Pump from WHALE PUMPS
Materials: Stainless steel, phosphor bronze, acetal, glass, reinforced polyproplene, nitrile rubber - High quality ABS plastic. 38mm (1 1/2") inleVoutlet Lightweight Can be mounted in various orientations/positions Large non choke valves Tough plastic housing keeps in nasty smells Easy to clean (no tools required) 56 litres (14 3/4 US gals) per minute Maximum lift: 4. 5m (15ft) Maximum head: 4. 5m (15ft) Weight: 1. 4lbs) Hose bore: 38mm (1½") Service kit: AK8050 Lift=1m (3ft) Head=0.

PHII Manual Head from RARITAN
Problem-free operation at a great value! Simple operation, quality components and a reasonable price. Each stroke of its self-priming pump gives simultaneous intake and discharge. Features an easy-to-clean china bowl and noncorroding thermoplastic case, housing and working parts. Material: Porcelain bowl, thermoplastic base . Port Sizes: 3/4" intake, 1-1/2" discharge . Dimensions: 14-1/16"H x 17-3/4"W x 19-1/2"D . PHII & PHEII Owner's Manual.