Top Sellers
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
Replacement Element for OMC Outboards Only, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
Fiberglass Cloth - Density (6 OZ), 60"W, Bulk from WEST MARINE
Suitable for a wide variety of building jobsMedium-density (6oz. ) E-glass. Use with polyester or epoxy resin for light building jobs, covering large areas or reinforcement when laying up or repairing a damaged area. Most commonly used fabric for repair and light building jobs. Medium-density (6oz. ) fiberglass cloth is ideal for covering large areas.
|
FLAG Resin, 1/2 Gallon from MAS EPOXY
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.
|
Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
|
Flag Epoxy Repair Kit from MAS EPOXY
For small repairs and bonding; Perfect where only a small amount is needed. Small enough to keep on board, but enough epoxy to make most quick repairs! Kit includes: 16oz. Flag Epoxy Resin. 8oz. medium hardener. 10 mixing sticks. 4pr. gloves.
|
LED, 12V 30W from DR. LED
Medium screw-base (Edison E26/E27) LED bulbs offer an energy-saving solution to incandescent lighting. Soothing warm white light. Offer low power draw and ultra-long service life: 50,000 hours. Impact and shock resistant. 8-18V DC. . U. S. made high flux LED. *Click here for the Dr.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
Ocean Mate I™ SOLAS Vest, Standard from STEARNS
Ocean Mate™ I Type I flotation device complies with SOLAS 83 requirements. Minimum of 18 lb. buoyancy (child). Reversible offshore PFD designed for quick donning . 3M Scotchlite Reflective Material SOLAS-grade 6755 on panels . Stackable for easy storage . Heavy-duty stainless steel hardware with an attached SOLAS whistle . Light storage pocket .
|
Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.
|
7' Ugly Stik Combo, Saltwater Spinning; 4.6:1 Gear Ratio; Medium Action from SHAKESPEARE
Shakespeare's versatile Ugly Stik combos give the anger plenty of casting power to deliver bait to crafty and boat-wary fish. The two piece rods feature Fuji reel seats and EVA grips to maximize sensitivity and response to light strikes and the Shakespeare spinning reel sports stainless bearings, graphite frame, and aluminum spools for fast, smooth retrieval and reliable casts. Style: Saltwater Spinning . Target Species: Big Water/Light Tackle Targets . Rod Type: Conventional Ugly Stik .
|
316 Stainless-Steel Hose Clamp, 7/16" to 11/16", SAE Size 3 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
|
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
|
|
Medium from STEARNS, Medium Heavy, Medium Edging, from SCHAEFER
|
|
Pet bowl mats offer the same great features as the standard mats in Beige with Beige binding.
Part No: 44060
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46091
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46058
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46098
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Anchor Rollers
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Part No: 66840061
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->V-Cleats
Inline static cleats are tremendously strong and abrasion-resistant. Teflon®-impregnated carbon fiber composite lasts far longer than traditional plastic cleats. Low-profile, snag-free cleats match existing Clam Cleat hole patterns.
Part No: RF5106
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors
Like mushroom anchors, this four-fluke anchor is a safe choice for inflatables - there are no open flukes to puncture fabric. It's easy to store and won't get tangled in other lines on your boat.
Part No: 0107-0702
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Free Hanging Sunshade
This unique sunshade sets up in minutes to offer relief from the sun's penetrating rays anywhere onboard. It uses two fiberglass and carbon-fiber composite poles that install quickly, just like a tent, and a center grommet that attaches to a halyard for easy height adjustment. Nylon lines at each corner attach to any point on the boat you would like for custom positioning. When the sun has gone down, it disassembles in the same way a tent does. Made from durable UV-protected rip-stop nylon.
Part No: BP160
|
|
|
|
First, they provide lots of warmth, reducing the chances of hypothermia onset in cold weather. Second, they look and feel like jackets, not safety gear, so they are more likely to be worn. Waist-length jackets with a front zipper and storm flap. Fleece-lined collar, big front pockets and a knit waistband with adjustable belt. Filled with ultra-soft flotation foam inside innovative sealed compartments. There’s no chance that the foam can become waterlogged over time. Type III USCG approved.
Part No: 7077N/F-03-000
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Fuel Filter Funnels
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.
Part No: WMF3C
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes->Grommetted Sea-Stow Dry Bags
Sea Kayaker Magazine's Reader's Choice Dry Bag for 2005! 70-denier urethane-coated nylon keeps the weight of this bag to a minimum, and the rugged material slides easily in and out of fiberglass and polyethylene kayaks The bags have a durable, clear urethane window that makes finding stuff a breeze The waterproof StormStrip™ closure doubles as a carry handle and also includes a handy D-ring Sizes are measured fully packed and closed.
Part No: 2972 MR
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Headsail Bags
Allows jib to conveniently remain ”hanked-on” and protected from UV radiation If you like the convenience of leaving your jib hanked on so you can raise it in a jiffy, be sure to protect it with one of these bags. Unlike many headsail bags, ours has a mesh panel to help prevent mildew and to allow moisture to drain. Top-quality, UV-resistant acrylic with a stainless lifting ring for the halyard to lift the bagged sail off the deck. Available in Medium and Large. Fits 20'-28"dia.
Part No: H114159
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Headsail Bags
If you like the convenience of leaving your jib hanked on so you can raise it in a jiffy, be sure to protect it with one of these bags. Unlike many headsail bags, ours has a mesh panel to help prevent mildew and to allow moisture to drain.
Part No: H287450
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Headsail Bags
If you like the convenience of leaving your jib hanked on so you can raise it in a jiffy, be sure to protect it with one of these bags. Unlike many headsail bags, ours has a mesh panel to help prevent mildew and to allow moisture to drain.
Part No: H287443
|
|
|
|
Home -> Fishing -> Rods -> Conventional Rods->Ugly Stik Big Water Casting Rods
Built using Shakespeare's exclusive Howald Process double-core construction for strength with sensitivity. Shakespeare Ugly Stik - Free Tackle Bag Offer - Download PDF Blank-thru-handle construction with a UV-resistant epoxy coating.
Part No: BWC1120 6 6 inc
|
|
|
|
Home -> Fishing -> Rods -> Conventional Rods->Power Stick Saltwater Rods
With tapers designed for saltwater anglers and fisheries everywhere, Power Stick® rods are favorites of professional and novice anglers alike. Charterboats prefer Power Stick® Rods for their performance and reliability. A stout mid and butt section of the rod is great for handling larger fish, and heavier weights for bottom fishing. All feature blank-through-butt construction, fully-underwrapped guides, graphite reel seats and foam grips. Type: Saltwater Conventional, Downrigger or Spinning .
Part No: 0009-0203
|
|
|
|
|
Home -> Fishing -> Rods->Power Stick Saltwater Rods
With tapers designed for saltwater anglers and fisheries everywhere, Power Stick® rods are favorites of professional and novice anglers alike. Charterboats prefer Power Stick® Rods for their performance and reliability. A stout mid and butt section of the rod is great for handling larger fish, and heavier weights for bottom fishing. All feature blank-through-butt construction, fully-underwrapped guides, graphite reel seats and foam grips. Type: Saltwater Conventional, Downrigger or Spinning .
Part No: PC3866
|
|
|
|
Home -> Fishing -> Rods->Ugly Stik Custom Rods
Blank-through-handle construction All guides are under-wrapped Genuine Fuji® reel seats (except stand-up rods) All stand-up rods feature Stuart® aluminum reel seats Most models feature genuine Fuji® guides and tops Aluminum or nylon gimbals with rubber butt caps Most models feature Ugly ButtTM rear grips All rods feature "Ugly Back" 60 day/5 year limited warranty.
Part No: USCS 1170 MH
|
|
|
|
|
Home -> Fishing -> Rods->Ugly Stik Custom Rods
Blank-through-handle construction All guides are under-wrapped Genuine Fuji® reel seats (except stand-up rods) All stand-up rods feature Stuart® aluminum reel seats Most models feature genuine Fuji® guides and tops Aluminum or nylon gimbals with rubber butt caps Most models feature Ugly ButtTM rear grips All rods feature "Ugly Back" 60 day/5 year limited warranty.
Part No: USCC 2270 MH
|
|
|
|
|
Home -> Fishing -> Rods->Ugly Stik Custom Rods
Blank-through-handle construction All guides are under-wrapped Genuine Fuji® reel seats (except stand-up rods) All stand-up rods feature Stuart® aluminum reel seats Most models feature genuine Fuji® guides and tops Aluminum or nylon gimbals with rubber butt caps Most models feature Ugly ButtTM rear grips All rods feature "Ugly Back" 60 day/5 year limited warranty.
Part No: USCSU1159 MH
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Lazy Jack Systems
Lazy Jacks control the mainsail when reefing or dousing, and easily tame today’s mainsails, whether full-battened or conventional type. Schaefer’s Lazy Jacks funnel the sail down to the boom and retain it, keeping you safe in the cockpit and allowing you to properly secure the sail when you are moored. Thimbled eyestraps attached to the bottom of your boom keep the hardware away from the cover and enable you to tuck your sailcover under the lazy jack control lines.
Part No: 99-63
|
|
|
|
|
Home -> Fishing -> Rods->Ugly Stik Custom Rods
Blank-through-handle construction All guides are under-wrapped Genuine Fuji® reel seats (except stand-up rods) All stand-up rods feature Stuart® aluminum reel seats Most models feature genuine Fuji® guides and tops Aluminum or nylon gimbals with rubber butt caps Most models feature Ugly ButtTM rear grips All rods feature "Ugly Back" 60 day/5 year limited warranty.
Part No: USCS1169-ML
|
|
|
|
|
Home -> Fishing -> Rods->Ugly Stik Custom Rods
Blank-through-handle construction All guides are under-wrapped Genuine Fuji® reel seats (except stand-up rods) All stand-up rods feature Stuart® aluminum reel seats Most models feature genuine Fuji® guides and tops Aluminum or nylon gimbals with rubber butt caps Most models feature Ugly ButtTM rear grips All rods feature "Ugly Back" 60 day/5 year limited warranty.
Part No: USCC 2270ML
|
|
|
|
|
Home -> Fishing -> Rods->Ugly Stik Custom Rods
Blank-through-handle construction All guides are under-wrapped Genuine Fuji® reel seats (except stand-up rods) All stand-up rods feature Stuart® aluminum reel seats Most models feature genuine Fuji® guides and tops Aluminum or nylon gimbals with rubber butt caps Most models feature Ugly ButtTM rear grips All rods feature "Ugly Back" 60 day/5 year limited warranty.
Part No: USCC2270-M
|
|
|
|
|
Home -> Fishing -> Rods->Power Stick Saltwater Rods
With tapers designed for saltwater anglers and fisheries everywhere, Power Stick® rods are favorites of professional and novice anglers alike. Charterboats prefer Power Stick® Rods for their performance and reliability. A stout mid and butt section of the rod is great for handling larger fish, and heavier weights for bottom fishing. All feature blank-through-butt construction, fully-underwrapped guides, graphite reel seats and foam grips. Type: Saltwater Conventional, Downrigger or Spinning .
Part No: 0009-0647
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fiberglass Dock Boxes
Mail-In Rebate - View Details Download Rebate Form (PDF) Built to last a lifetime! Our fiberglass dock boxes are built tough to endure ruthless weather conditions and severe marine environments year after year. Pneumatic lid lifts now come standard on all models and include all-stainless components. These shocks keep the lid open on rocking docks and allows for a slower, more controlled closing in high winds. Stainless-steel lockable latches and hardware. Hinges: Stainless-steel piano hinge .
Part No: 73557
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Mainsail Covers
Even the toughest mainsail goes to pieces if left exposed to damaging UV radiation. Protect it with our top-quality marine acrylic canvas covers. A clever extendable panel, attached to the cover with hook-and-loop tape, lets you to extend the length up to 2' to cover the end of your boom. We’ve sized the girth measurement generously, so the cover will fit stiff, new sails, and those that weren't flaked properly. Lined to protect against most winch chafe. Brass twist fasteners.
Part No: H287476
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Mainsheet Track Systems
These kits make upgrading easier with three sizes for boats up to 48'. The sliding bolt track that comes with the kit lets you re-use the original mounting holes of an older track system. Kits include sliding bolt track, control-line end stops and Torlon® ball-bearing cars that allow easy position adjustment with the mainsheet fully tensioned for maximum performance from the mainsail. Size Small kit includes standard end stops and deck-mounted Cam Cleats. Track Type: Sliding bolt mount.
Part No: 29061354
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Mast Sheet Bags
Keep the mast area tidy with this handy sheet and gear bag. Large 2" webbing hook-and-loop straps secure bag to the mast and out of the way.
Part No: BP555
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->V-Cleats
Inline static cleats are tremendously strong and abrasion-resistant. Teflon®-impregnated carbon fiber composite lasts far longer than traditional plastic cleats. Low-profile, snag-free cleats match existing Clam Cleat hole patterns.
Part No: RF5105
|
|
|
