Top Sellers
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
|
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
|
|
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
ComfortMate Manual Head from THETFORD
Designed for comfort, convenience and worry-free days on the water, this head features a residential-like china bowl and an ergonomic handle that makes it easy to flush. A compact footprint enables this head to fit in tight locations and the free-standing manual pump easily adapts for right or left handed installation. Features: Free-standing pump, china bowl with residential-like styling. Material: Vitreous china . Port Sizes: 3/4" inlet, 1-1/2" discharge . Dimensions: 14.
|
|
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
|
Medium Free Hanging Sunshade, Medium Action, mat, 2"H x 1-1, Medium CableCap
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock & Post Bumpers
.
Part No: DB3.90
|
|
|
|
Home -> Fishing -> Rods -> Conventional Rods->Power Stick Saltwater Rods
With tapers designed for saltwater anglers and fisheries everywhere, Power Stick® rods are favorites of professional and novice anglers alike. Charterboats prefer Power Stick® Rods for their performance and reliability. A stout mid and butt section of the rod is great for handling larger fish, and heavier weights for bottom fishing. All feature blank-through-butt construction, fully-underwrapped guides, graphite reel seats and foam grips. Type: Saltwater Conventional, Downrigger or Spinning .
Part No: PD3880
|
|
|
|
Home -> Fishing -> Rods->Ugly Stik Big Water Boat Rods
Built using Shakespeare's exclusive Howald Process double-core construction for strength with sensitivity. Shakespeare Ugly Stik - Free Tackle Bag Offer - Download PDF . Blank-thru-handle construction with a UV-resistant epoxy coating . Durable EVA foam grips . Fuji® graphite reel seats with stainless steel hoods .
Part No: BWS1100 6 6 inc
|
|
|
|
|
Home -> Fishing -> Rods->Ugly Stik Big Water Boat Rods
Built using Shakespeare's exclusive Howald Process double-core construction for strength with sensitivity. Shakespeare Ugly Stik - Free Tackle Bag Offer - Download PDF . Blank-thru-handle construction with a UV-resistant epoxy coating . Durable EVA foam grips . Fuji® graphite reel seats with stainless steel hoods .
Part No: BWS 1100-7
|
|
|
|
|
Home -> Fishing -> Rods -> Conventional Rods->Power Stick Saltwater Rods
With tapers designed for saltwater anglers and fisheries everywhere, Power Stick® rods are favorites of professional and novice anglers alike. Charterboats prefer Power Stick® Rods for their performance and reliability. A stout mid and butt section of the rod is great for handling larger fish, and heavier weights for bottom fishing. All feature blank-through-butt construction, fully-underwrapped guides, graphite reel seats and foam grips. Type: Saltwater Conventional, Downrigger or Spinning .
Part No: 0009-0202
|
|
|
|
Home -> Fishing -> Rods->Ugly Stik Custom Rods
Blank-through-handle construction All guides are under-wrapped Genuine Fuji® reel seats (except stand-up rods) All stand-up rods feature Stuart® aluminum reel seats Most models feature genuine Fuji® guides and tops Aluminum or nylon gimbals with rubber butt caps Most models feature Ugly ButtTM rear grips All rods feature "Ugly Back" 60 day/5 year limited warranty.
Part No: USCS1170-M
|
|
|
|
|
Home -> Fishing -> Rods->Ugly Stik Custom Rods
Blank-through-handle construction All guides are under-wrapped Genuine Fuji® reel seats (except stand-up rods) All stand-up rods feature Stuart® aluminum reel seats Most models feature genuine Fuji® guides and tops Aluminum or nylon gimbals with rubber butt caps Most models feature Ugly ButtTM rear grips All rods feature "Ugly Back" 60 day/5 year limited warranty.
Part No: USCB 1170 M
|
|
|
|
|
Home -> Fishing -> Rods -> Conventional Rods->Power Stick Saltwater Rods
With tapers designed for saltwater anglers and fisheries everywhere, Power Stick® rods are favorites of professional and novice anglers alike. Charterboats prefer Power Stick® Rods for their performance and reliability. A stout mid and butt section of the rod is great for handling larger fish, and heavier weights for bottom fishing. All feature blank-through-butt construction, fully-underwrapped guides, graphite reel seats and foam grips. Type: Saltwater Conventional, Downrigger or Spinning .
Part No: PC6721M
|
|
|
|
Home -> Fishing -> Rods->New Senator Rods
Other key features include AFTCO Roller stripping guide and tiptop, with chromed stainless “In-Between” guides for the best combination of line-wear protection and economy. All Senator® Rods include Penn’s Slick Butt® for increased durability and ease of quickly removing the rod from the rod holder under the intense pressure of a “submarining” fish. This combination of chromed ring guides and rollers with Penn’s Slick Butt® is indicated by the RS model designation. Type: Conventional/Standup.
Part No: 3165RS
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Lazy Jack Systems
These kits contain everything for installing a simple, variable system Keep your mainsail under control and on the boom as it’s lowered. Works exceptionally well with fully-battened mains, but can also be used with conventional sails. Everything you need to install a simple, adjustable system is included in the kit: pre-swaged wires, blocks, eyestraps, line, a cleat, fasteners and instructions (including how to alter your sail cover for use with lazy jacks). 13m–3. 75m). 6' to 16' (3.
Part No: 253
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Bulkhead Sheet Bags
"Easy to remove and store in the cabin so they don’t get weather-beaten. " Keep sheets and other gear organized and out of the way Tough, UV-protected nylon sheet bags mount to your bulkhead easily and reduce clutter while underway. The sides of each bag cinch in with bungee cord to help keep contents contained. The Combi sheet bags feature two additional inside pockets for holding winch handles or drinks . An outside mesh pocket that keeps your wetnotes or multi-tool handy.
Part No: BP460
|
|
|
|
Home -> Electrical -> Batteries & Accessories->CableCaps for Automotive Terminals
Use on batteries with conventional automotive-style terminals without add-on wingnut posts.
Part No: 4017
|
|
|
|
Home -> Electrical -> Batteries & Accessories->CableCaps for Add-On Battery Terminals
Use on batteries with automotive-style terminals to which you’ve added clamp-on marine terminals. Molded PVC enables installation of the CableCap after the terminals are crimped on cables.
Part No: 4006
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable -> Coax & Connectors->CableClam Waterproof Through-Deck Fittings
CableClams provide a leak-free way to run antenna and electrical cables through a surface, yet allow the cable and connector to be removed at a later time. Using your own drill to create the precise hole diameter required greatly improves waterproofness over pre-drilled models. A tapered center seal grips wire securely when the fasteners are tightened.
Part No: 1002
|
|
|
|
Small Center Console 42”H x 36”W x 24”D Medium Center Console 44”H x 40”W x 30”D Large Center Console 45”H x 46”W x 40”D UV Protection, Polyurethane Coating Air vents for ventilation Secure Draw String Hem.
Part No: 80410
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40410
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->West Marine / Avon / Zodiac Inflatables Accessories
West Marine/Avon /Zodiac Inflatable Accessories.
Part No: SSL261100
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Awning De Luxe
Shelter and shade your cockpit in just minutes! Cockpit awning drapes over your boom to provide shade and protection from sun and rain. A nylon webbing system makes it easy to attach the awning corners to lifelines or a stern pulpit and uses easily adjustable plastic buckles. Made of durable, UV-protected ripstop nylon fabric with a reinforced hem and two built-in vents, one on each side, for extra ventilation on hot days.
Part No: BP112
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Edge Dock Bumpers
Unique C-shape design provides protection on the top as well as the side of the dock–protecting any type of boat where the gunnel hangs over the dock. Polyester with closed-cell foam inner cushion. Will not deteriorate in the sun and cleans easily with liquid soap. Mounts using stainless steel screws.
Part No: SEDB3.30
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Edge Dock Bumpers
Unique C-shape design provides protection on the top as well as the side of the dock–protecting any type of boat where the gunnel hangs over the dock. Polyester with closed-cell foam inner cushion. Will not deteriorate in the sun and cleans easily with liquid soap. Mounts using stainless steel screws.
Part No: SEDB3.60
|
|
|
|
Pet bowl mats offer the same great features as the standard mats in Beige with Beige binding.
Part No: 44060
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46091
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46058
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46098
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Anchor Rollers
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Part No: 66840061
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->V-Cleats
Inline static cleats are tremendously strong and abrasion-resistant. Teflon®-impregnated carbon fiber composite lasts far longer than traditional plastic cleats. Low-profile, snag-free cleats match existing Clam Cleat hole patterns.
Part No: RF5106
|
|
|
|
Home -> Anchor & Docking -> Anchors
Like mushroom anchors, this four-fluke anchor is a safe choice for inflatables - there are no open flukes to puncture fabric. It's easy to store and won't get tangled in other lines on your boat.
Part No: 0107-0702
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Free Hanging Sunshade
This unique sunshade sets up in minutes to offer relief from the sun's penetrating rays anywhere onboard. It uses two fiberglass and carbon-fiber composite poles that install quickly, just like a tent, and a center grommet that attaches to a halyard for easy height adjustment. Nylon lines at each corner attach to any point on the boat you would like for custom positioning. When the sun has gone down, it disassembles in the same way a tent does. Made from durable UV-protected rip-stop nylon.
Part No: BP160
|
|
|
|
First, they provide lots of warmth, reducing the chances of hypothermia onset in cold weather. Second, they look and feel like jackets, not safety gear, so they are more likely to be worn. Waist-length jackets with a front zipper and storm flap. Fleece-lined collar, big front pockets and a knit waistband with adjustable belt. Filled with ultra-soft flotation foam inside innovative sealed compartments. There’s no chance that the foam can become waterlogged over time. Type III USCG approved.
Part No: 7077N/F-03-000
|
|
|
|
Home -> Engine Systems -> Engine Parts->Fuel Filter Funnels
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.
Part No: WMF3C
|
|
|
