Top Sellers
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
|
|
Triple, 1/2" - 9/16" Line Dia., 59.6oz from LEWMAR
Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Application: High load applications on boats to 55', low load and control lines on larger boats . Safe Working Load: 2650lb.
|
Ratchet Orbit Block, Cheek, Counter-Clockwise, 550lb. SWL, 2.7oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. It can be set at a 0 or 90 degree orientation, provides stress-free articulation without allowing the block to over-rotate, and is locked in place with a security clip that doesn’t require tools to fit. The Dyneema link is also more compatible with carbon, Dyneema and webbing connection points than steel loop tops or shackles.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
|
10mm from EQUIPLITE, 12mm from EQUIPLITE, 14mm from EQUIPLITE
|
|
Home -> Electronics -> Boat Instruments->Pathfinder, C-Series and RayChart Accessories, SeaTalk Cables
RayMarine Pathfinder and RayChart accessories Extension cables for hsb splitters, active heading sensors, Radome cables, mounts and much more!.
Part No: E55059
|
|
|
|
|
Home -> Electronics -> Boat Instruments->Pathfinder, C-Series and RayChart Accessories, SeaTalk Cables
RayMarine Pathfinder and RayChart accessories Extension cables for hsb splitters, active heading sensors, Radome cables, mounts and much more!.
Part No: R08004
|
|
|
|
|
Home -> Electronics -> Boat Instruments->Pathfinder, C-Series and RayChart Accessories, SeaTalk Cables
RayMarine Pathfinder and RayChart accessories Extension cables for hsb splitters, active heading sensors, Radome cables, mounts and much more!.
Part No: R55005
|
|
|
|
Home -> Electronics -> Boat Instruments->NMEA 2000 Cables & Accessories
NMEA 2000 Cables & Accessories.
Part No: 010-11095-00
|
|
|
|
|
Home -> Electronics -> Boat Instruments->NMEA 2000 Cables & Accessories
NMEA 2000 Cables & Accessories.
Part No: 010-11094-00
|
|
|
|
Home -> Electronics -> Boat Instruments->Network Adapter Cables
Network Adapter Cables NMEA2000® Product to Yamaha Command Link Network Adapter Cable. Yamaha Command Link Product to NMEA 2000® Network Adapter Cable .
Part No: MARE-002
|
|
|
|
Home -> Ventilation -> Dehumidifiers, Air Purifiers
Effective and economical, the Ultra Dome uses super-dry, moisture-collecting pellets to control humidity. The pellets cost less and collect more moisture than the flakes used by other systems. Ultra Dome’s design locates pellets high above trapped moisture for peak efficiency and the over-sized reservoir enables it to work longer than other designs. Treats up to 1,800 square feet. 7-1/2"H x 5-1/2"dia.
Part No: 085460
|
|
|
|
Home -> Engine Systems -> Steering Systems
A direct replacement for NFB 4. 2 Rotary system. For use with virtually all of today's outboard boats with wheels to 16''. 4. 2 turns lock-to-lock. Uses QC (SSC62) steering cables.
Part No: SH4910P
|
|
|
|
Home -> Engine Systems -> Steering Systems
Designed as a direct replacement for NFB Safe-T II steering systems. For all V-4 and smaller outboards. 3 turns lock-to-lock. Uses QC II (SSC62) steering cables.
Part No: SH5150P
|
|
|
|
Home -> Watersports -> Skindiving Gear
One application lasts at least 3 dives in one day.
Part No: 1801
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories
No need for knots in your fender lines. No knot HD marine nylon fender hanger keeps fenders in place with a simple system.
Part No: 1105
|
|
|
|
Designed to lay over your boat’s gunnel, and with your choice of design, salutation or admonition, these mats are a great way to protect your gelcoat and greet your guests. Mats feature non-skid backings, are made of heavy marine canvas and weighted at each end to assure that they stay put in a breeze.
Part No: BM-20-NSP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Attach the No Spill container to the hull with the powerful suction cups over the fuel tank vent when refueling. The fuel-resistant bottle will capture the runover fuel from the vent when the tank is full. Prevent stains on the hull and pollution to the environment.
Part No: 376
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware
Identify your drink with style! Bright colorful print on polyester foam to keep your can or bottle beverage cold and dry.
Part No: 459-960
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
Speeds up the prepping process prior to application of antifouling paint Eliminates the need to sand fiberglass boats before painting by creating a chemical bond between the fiberglass surface and the first coat of antifouling paint. Quart. Primary Usage: Underwater, bare fiberglass, as tie-coat for bottom paint . Formulation: Underwater fiberglass primer for bottom paint. Applies Over: De-waxed bare fiberglass. to 2 hrs. Number of Coats Recommended: One coat, applied in one direction only.
Part No: YPA200/QT
|
|
![Nobeltec PASSPORT DELUXE # 40 HAWAIIAN ISLAN from NOBELTEC]( "Nobeltec PASSPORT DELUXE # 40 HAWAIIAN ISLAN from NOBELTEC")
|
|
Home -> Electronics -> Software -> Nav Charts On CD-ROM->Passport Deluxe Digital Charts & Planning Software
For US waters, Passport Deluxe is the only electronic charting package that includes digitized versions of both raster and vector official NOAA charts. Passport Deluxe will work with any Nobeltec Navigation software 6. 0 or higher including Visual Navigation Suite, Visual Mariner and Nobeltec Admiral. These regions also include a copy of Nobeltec’s Visual GPS Planner, so you can plan your trip with unlimited routes and waypoints, and even send and receive them to and from your computer and GPS.
Part No: REG 40
|
|
|
|
Home -> Engine Systems -> Engine Parts->Noise Control Barrier Material
The 3/32" flexible vinyl sheet is fused between two layers of foam—an exterior (“decoupler”) layer and an interior (“absorber”) layer. The exterior layer is then covered with a thin film (2. 5 mil) of mylar, reinforced with elastomer-coated fiberglass, for surface heat protection and enhanced sound absorption. The overall effect is a dramatic noise reduction when compared with single-layer foam barriers. Available in two overall thicknesses. Peel and stick backing for easy installation.
Part No: 47501
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Noise Control Barrier Material
The 3/32" flexible vinyl sheet is fused between two layers of foam—an exterior (“decoupler”) layer and an interior (“absorber”) layer. The exterior layer is then covered with a thin film (2. 5 mil) of mylar, reinforced with elastomer-coated fiberglass, for surface heat protection and enhanced sound absorption. The overall effect is a dramatic noise reduction when compared with single-layer foam barriers. Available in two overall thicknesses. Peel and stick backing for easy installation.
Part No: 47500
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Noise Control Barrier Material
The 3/32" flexible vinyl sheet is fused between two layers of foam—an exterior (“decoupler”) layer and an interior (“absorber”) layer. The exterior layer is then covered with a thin film (2. 5 mil) of mylar, reinforced with elastomer-coated fiberglass, for surface heat protection and enhanced sound absorption. The overall effect is a dramatic noise reduction when compared with single-layer foam barriers. Available in two overall thicknesses. Peel and stick backing for easy installation.
Part No: 48128
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 12-6NS
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 14-8NS
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 5-3NS
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 6-4NS
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 8-5NS
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 10-5NS
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Non-Hazardous Carpet Glue
Non-flammable, solvent-free and completely waterproof after curing. For metal, wood, concrete or fiberglass. One gallon covers 90-120 sq.
Part No: R880532
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches
Non-Locking chrome plated zinc alloy and black plastic with offset cam bar and flexible plastic strike plate. Detents indicate open or closed position. Door thickness: 1/4" to 1-1/8" . Face plate dimensions: 2-1/2" x 2-1/2" . Adjustment latch bar: 3/8" to 3" .
Part No: 0932DP1BLK
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches
Ideal for smooth and carpeted surfaces. Black plastic with chrome plated zinc T-handle. Stainless-steel stem. Off-set cam bar adjusts from 3/4"–2-3/8". Installs in 2-1/2" dia.
Part No: 1092DP1BLK
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches
Non-Locking chome plated zinc alloy and black plastic with offset adjustable cam bar. Detents indicate open or closed position. Door thickness: 1/4" to 1-1/8" . Face plate dimensions: 2-1/2" x 2-1/2" . Adjustment latch bar: 3/8" to 3" .
Part No: 0932DP2BLK
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches
Non-Locking chome plated zinc alloy and white plastic with offset adjustable cam bar. Detents indicate open or closed position. Door thickness: 1/4" to 1-1/8" . Face plate dimensions: 2-1/2" x 2-1/2" . Adjustment latch bar: 3/8" to 3" .
Part No: 0932DP2WHT
|
|
|
