Top Sellers
Four-Stroke Outboard Oil Filter from MERCURY MARINE
Replaceable screw-on type canister filter. Fits the 75/90/115 hp.
|
Outboard Oil Filter Wrench from MERCURY MARINE
Fits the replaceable screw-on type canister oil filters found on current Mercury / Mariner 4-Stroke outboards 9.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
2.5 Gallon, TCW-3 Quicksilver Oil from MERCURY MARINE
This two-cycle oil far exceeds TC-W3 standards to provide superior engine protection.
|
Fuel and Carburetor Filters from MERCURY MARINE
In-Line outboard filters with plastic bowls fit 1/4" or 5/16" fuel lines. Carburetor filters fit Rochester 2- and 4-barrel or MerCarb 2-barrel (Model 1661800) or Rochester 2-barrel w/Carter fuel pump (Model 1661727). Fuel Type: Gasoline . Flow Rate: n/a . Filtering Fidelity: n/a . Mounting Head: n/a . Inlets/Outlets: 1/4" . Element Dimensions: n/a . Bowl Material: Plastic . Drain Fitting: n/a .
|
|
|
Synthetic Blend 4-Cycle Engine Oil, Quart from QUICKSILVER
Recommended for gasoline and diesel-powered stern-drive and inboard engines that require FC-W Certified, SAE 25W-40 oil.
|
Delo 400 Motor Oil, 400 15W-40, 5 Gallons from CHEVRON
Premium quality, heavy-duty motor oil exceeds all OEM requirements and provides exceptional protection, even under severe conditions Largest selling heavy duty engine oil in the USA. Premium quality engine oil exceeds industry and factory performance specifications. Recommended for all 4-cycle diesel and 4-cycle gasoline engines operating under severe conditions. Formulated with the most advanced additive technology. Superior results with either low or normal sulfur diesel fuels.
|
Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .
|
Air Filter for Detroit Diesel Engines 671 Natural/Turbo, 8V71 Natural, 12V71 2 Turbo, 6V92 2 Turbo, 8V92 1 Turbo/2 Turbo, 12V92 Natural, All HP, Tapered, 9" x 9" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).
|
SeaFin Teak Oil - Quart from DALY'S SEA FIN
High-quality penetrating oil dries to a low sheen. Seals and protects interior and exterior wood from moisture and weather.
|
Premium Gold Teak Oil - Pint from WEST MARINE
For a rich golden finish, try this oil!If you prefer teak with a golden color, try this premium oil. A blend of natural oils, it penetrates deeply into teak and other hardwoods. UV-resistant golden finish is ideal for exterior wood applications. It’s easy to apply, quick-drying and it beautifies and protects all onboard wood against cracking or peeling.
|
Quart, TCW-3 Quicksilver Oil from MERCURY MARINE
This two-cycle oil far exceeds TC-W3 standards to provide superior engine protection.
|
10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
|
Air Filter for Caterpillar Engine 3116, Detroit Diesel Engines 6V92 1 Turbo, 12V92 2 Turbo, All HP, Tapered, 9" x 12" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).
|
|
Oil Filter, Oil Filter Cartridge from SIERRA
|
|
Home -> Engine Systems -> Engine Parts
Makes changing your oil a snap and without the mess!. Permanently mounts to bottom of oil pan to make changing oil more convenient. Drains 4 quarts of oil in less than 15 minutes without a pump. Fittings on hose machined from corrosion resistant brass. Assembly sized to pass through most common hull drains. For easy installation this kit includes: 42" hose with hose hanger. Universal oil pan replacement plug. End cap.
Part No: 18-7892
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7875
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7876
|
|
|
|
Home -> Engine Systems -> Engine Parts->Mercruiser Oil Filters
This marine filter, engineered for a marine environment, provides outstanding durability through a more robust design, heavier gauge materials and a superior paint process inside and out. V-6 & V-8 model for engines with remote oil filters. Ford V-8 model for engines with & without remote oil filters.
Part No: 802886Q
|
|
|
|
Home -> Engine Systems -> Engine Parts->Mercruiser Oil Filters
This marine filter, engineered for a marine environment, provides outstanding durability through a more robust design, heavier gauge materials and a superior paint process inside and out. V-6 & V-8 model for engines with remote oil filters. Ford V-8 model for engines with & without remote oil filters.
Part No: 866340Q03
|
|
|
|
Home -> Engine Systems -> Engine Parts->Mercruiser Oil Filters
This marine filter, engineered for a marine environment, provides outstanding durability through a more robust design, heavier gauge materials and a superior paint process inside and out. V-6 & V-8 model for engines with remote oil filters. Ford V-8 model for engines with & without remote oil filters.
Part No: 883702Q
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7910
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7911
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7913
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7914
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7915-1
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7824
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7879
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7903
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7878-1
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7902
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7901
|
|
|
|
Home -> Engine Systems -> Engine Parts
Oil Filter / Nissan: 9.
Part No: 18-79111
|
|
|
|
Home -> Engine Systems -> Engine Parts
Oil filter cartridge.
Part No: 18-7909
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7887
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7886
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7927
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7899
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7926
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7917
|
|
|
|
Home -> Engine Systems -> Engine Parts->Fram Oil Filters
Original equipment on the majority of automotive and marine engines. These filters remove harmful contaminants from your engine oil.
Part No: PH11
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Oil Filter Elements
Fits all MCM/MIE GM engines, except V-6 without remote oil filter.
Part No: 858004Q
|
|
|
|
Home -> Engine Systems -> Engine Parts->Oil Filter Wrenchs
Plastic comfort grip, stainless steel.
Part No: 18-9789
|
|
|
|
Home -> Engine Systems -> Engine Parts->Oil Filter Wrenchs
Plastic comfort grip, stainless steel.
Part No: 18-9790
|
|
|
|
Home -> Engine Systems -> Engine Parts
Oil Filter, Fits Merc HP GM V-8.
Part No: 16595Q
|
|
|