Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.

TastePURE™ Spring Fresh Water System Treatment from CAMCO PRODUCTS
Clean and deodorize boat and RV fresh water systems with this safe, biodegradable formula. Dewinterize freshwater tank and lines. Good for periodic cleaning, freshening and deodorizing. One step, no-measure solution requires no mixing or preparation. One gallon cleans up to a 100 gallon tank.

Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.

Gelcoat Restoration Kit from MEGUIARS
Everything you need to rejuvinate and protect your boat's gelcoatAssortment of Meguiar’s fiberglass maintenance products to clean, polish and protect badly oxidized fiberglass. Contains one 16oz. container each of #56 Pure Wax, #49 Heavy-Duty Oxidation Remover and #45 Boat Polish. Complete gelcoat restoration system for your boat.

20" x 20" Shade/Screen, Fits Lewmar Hatches, White from SKYSHADE
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.

Folding Step from SEADOG
Handy when you need it, but out of the way when you don't! Projects just 13/16" when folded. Chrome-lated brass wtih a stainless steel spring.

Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".

Quickstep Boarding Ladder - 1 Step from DOYLE MARINE
The design of QuickStep™ was determined from extensive testing in a variety of applications over a period of years. QuickStep™ makes easy work of many situations that might otherwise be tense and cumbersome, such as bow handling when leaving your dock (simply hook it near the bow, push off and step aboard). Its exceptional as a step from dinghy to deck and provides the boost you need to get in your dinghy from the water and other small watercraft. It is easily adjusted to a variety of heights.

Straight Adapter, 30A Male/15A Female (straight blade, not locking, connections) from MARINCO
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.

Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.

Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.

Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.

Yamaha Outboard 1984-1996, 1-4 Cyl., V4, V6, 2-250 HP from SELOC PUBLICATIONS
Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. This repair manual covers all Yamaha outboard engines, 12-250 HP, 1-4 cylinder, V4, V6 models, 1990 to 2001. Every manual features: Easy-to-follow, step-by-step, illustrated procedures . Hundreds of exploded drawings, photographs and tables . Troubleshooting sections .