Top Sellers
5mm 8-Plaited Dinghy Line, 1232lb. Breaking Strength, Black from FSE ROBLINE
A pre-stretched, all polyester line that’s very useful for a wide range of dinghy and small keelboat applications. Low stretch, low water absorption and very easily handled. Best Use: Control lines and spinnaker halyards for dinghies and small keel boats . Construction: Braided cover, parallel core . Cover Fiber/Construction: 8-plait braided polyester . Core Fiber/Construction: Parallel polyester . Stretch: 2.
|
Step Pad, 10-3/4" x 5-1/4", Blue from LEWMAR
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
|
|
5 Series Block, Double, Stainless Cheeks, 11.6oz. from SCHAEFER
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
|
Water Temp. IB SD from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
12 Volt White Dual Trumpet Mini Air Horn from AFI
White epoxy powder-coated finish over solid brass. Noncorrosive Lexan® diaphragm. 12vDC. . Draws 20 amps max. Includes compressor, air tubing, fittings, and hardware. 5" W x 3-3/4"H x 9-1/2" L.
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
Interdeck Squall Blue - Quart from INTERLUX
Provides excellent slip resistance in a variety of colorsInterdeck provides an excellent slip-resistant finish with a tough polyurethane resin that protects decks against everyday wear and tear. Interdeck has a low-sheen finish to reduce sun glare. Available in White, Cream, Beige, Gray and Blue. Formulation: One-part polyurethane nonskid enamel . Application: Brush or roller . Number of Coats Recommended: One or two . Drying Time: At 73°F - To touch: 4 hrs. to 2 days; To walk on: 2 days .
|
7/16" LS Polyester Braid, 4,900lb. Breaking Strength, White from SAMSON ROPE
LS is white 2-in-1™ braided polyester rope with variegated red and green ID in the cover. LST is the same as LS Yacht Braid with the addition of your choice of color tracers in black, red, green, or blue. LS and LST are both good general purpose yacht braids for all applications. Good strength characteristics . Great "hand". Great flexibility and handling . Excellent abrasion resistance . Class I Double Braid .
|
Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
|
Stanchion Base from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
|
5-to-1 Lifesling Hoisting Tackle for Powerboats from LIFESLING
This is the easiest and quickest way to get your crewmember back onboard without the use of a winch. Lifting tackle has a 5:1 purchase, since powerboats generally lack winches, and a triple block with downward facing cam cleat for securing the line. Large carabiner snaps allow attachment to Lifesling and vessel.
|
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
|
Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
|
|
|
5, from SCHAEFER, Blue from FSE ROBLINE, White from FSE ROBLINE
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Hump Hoses
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
Part No: 16-220-4000KIT
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed typesa 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-7
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Super Hooker Pivoting Fluke Anchors
An economical "lunch hook" and spare anchor Strong steel pivoting fluke anchors are built to original Danforth dimensions and are ideal for holding in sand or mud in protected waters. Non-tapered shank, fully welded crown and L-shaped flukes. Hot dip galvanized. Style: Pivoting steel fluke . Material: Galvanized steel . Our most affordable fluke-style anchor. Cons: Lacks the strength of premium models. Not reliable for overnight holding or for use in grass, rocks or clay.
Part No: 95035
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->8-Plaited Dinghy Line
A pre-stretched, all polyester line that’s very useful for a wide range of dinghy and small keelboat applications. Low stretch, low water absorption and very easily handled. Best Use: Control lines and spinnaker halyards for dinghies and small keel boats . Construction: Braided cover, parallel core . Cover Fiber/Construction: 8-plait braided polyester . Core Fiber/Construction: Parallel polyester . Stretch: 2.
Part No: 8P-4BLK
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->8-Plaited Dinghy Line
A pre-stretched, all polyester line that’s very useful for a wide range of dinghy and small keelboat applications. Low stretch, low water absorption and very easily handled. Best Use: Control lines and spinnaker halyards for dinghies and small keel boats . Construction: Braided cover, parallel core . Cover Fiber/Construction: 8-plait braided polyester . Core Fiber/Construction: Parallel polyester . Stretch: 2.
Part No: 8P-4BLU
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->8-Plaited Dinghy Line
A pre-stretched, all polyester line that’s very useful for a wide range of dinghy and small keelboat applications. Low stretch, low water absorption and very easily handled. Best Use: Control lines and spinnaker halyards for dinghies and small keel boats . Construction: Braided cover, parallel core . Cover Fiber/Construction: 8-plait braided polyester . Core Fiber/Construction: Parallel polyester . Stretch: 2.
Part No: 8P-4R
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->8-Plaited Dinghy Line
A pre-stretched, all polyester line that’s very useful for a wide range of dinghy and small keelboat applications. Low stretch, low water absorption and very easily handled. Best Use: Control lines and spinnaker halyards for dinghies and small keel boats . Construction: Braided cover, parallel core . Cover Fiber/Construction: 8-plait braided polyester . Core Fiber/Construction: Parallel polyester . Stretch: 2.
Part No: 8P-4W
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Dinghy Control Line
Combining high strength, low stretch and light weight, Dinghy Control line is ideal for uses such as main and jib halyards and downhaul/outhaul control lines. The braided polyester cover gives comfortable handling and the braided Dyneema SK-75 core provides the strength. Each individual fiber in the core is impregnated with Robline’s unique S. Y. I. S. In addition, the cover can be stripped as needed to save weight and decrease the diameter. Best Use: Dinghy halyards, downhauls and outhauls .
Part No: DC-4BLU
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Dinghy Control Line
Combining high strength, low stretch and light weight, Dinghy Control line is ideal for uses such as main and jib halyards and downhaul/outhaul control lines. The braided polyester cover gives comfortable handling and the braided Dyneema SK-75 core provides the strength. Each individual fiber in the core is impregnated with Robline’s unique S. Y. I. S. In addition, the cover can be stripped as needed to save weight and decrease the diameter. Best Use: Dinghy halyards, downhauls and outhauls .
Part No: DC-4GRN
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Dinghy Control Line
Combining high strength, low stretch and light weight, Dinghy Control line is ideal for uses such as main and jib halyards and downhaul/outhaul control lines. The braided polyester cover gives comfortable handling and the braided Dyneema SK-75 core provides the strength. Each individual fiber in the core is impregnated with Robline’s unique S. Y. I. S. In addition, the cover can be stripped as needed to save weight and decrease the diameter. Best Use: Dinghy halyards, downhauls and outhauls .
Part No: DC-4R
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Finish Line™ by the Spool
A great line for dinghy outhauls, vang systems, cunninghams, hiking strap lines, centerboard lines, topping lifts and halyardsSuper-strong prestretch doublebraid is made from a high-tenacity tension-set polyester with an 8-strand "nubby" cover and a continuous filament parallel core. Excellent for all-purpose control lines on dinghies and small catamarans. It's the highest-strength small diameter line at an affordable price. Construction: Double braid with parallel core. Stretch: 1.
Part No: 3688-04-00050
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Finish Line™ by the Spool
A great line for dinghy outhauls, vang systems, cunninghams, hiking strap lines, centerboard lines, topping lifts and halyardsSuper-strong prestretch doublebraid is made from a high-tenacity tension-set polyester with an 8-strand "nubby" cover and a continuous filament parallel core. Excellent for all-purpose control lines on dinghies and small catamarans. It's the highest-strength small diameter line at an affordable price. Construction: Double braid with parallel core. Stretch: 1.
Part No: 3683-04-00050
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Finish Line™ by the Foot
Finish Line™ is a 100% pre-stretched polyester with an 8-strand “nubby” cover and continuous filament core. The low-stretch, high-strength characteristics of this rope make it ideal for halyards, cunninghams, and topping lifts, among other applications.
Part No: 3687-04-00600
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Finish Line™ by the Foot
Finish Line™ is a 100% pre-stretched polyester with an 8-strand “nubby” cover and continuous filament core. The low-stretch, high-strength characteristics of this rope make it ideal for halyards, cunninghams, and topping lifts, among other applications.
Part No: 3680-04-00600
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551605
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551705
|
|
|
|
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
Part No: 5321476
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Plastic Gas Cans
CARB spill-proof gas and diesel cans feature a spill-proof fueling system to meet tough Air Resources Board regulations in CA, NY, MD, DE and PA, where environmental laws prohibit the sale of open, vented fuel cans within the state. Self Venting cans, not legal for sale in certain states, feature the new Pull 'n Pour Spout, with venting via the pour tube for improved safety and less spillage. The Sure Pour™ Nozzle Conversion Kit replaces old style spouts with the clean, CARB compliant type . S.
Part No: 31733
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Jerry Can - 5 Gallon
EPA Approved Spill Proof CARB Fueling System Ecologically friendly, the 'ECO' spill proof Jerry Cans are the safest products available and provide 100% compliance with California's Air Resource Board (CARB) emission and spill control regulations. All ECO Jerry Cans are manufactured using patented technology that provides permeation levels well below the CARB . 40 gram/gal/day threshold.
Part No: 005092
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Gasoline Containers
Flexible spouts stored inside the container make pouring easy and the tanks’ unique shapes keeps their centers of gravity low to prevent tipping. Large, easy-to-grip handles make carrying easy. Security straps keep caps and filler from being lost.
Part No: 007622
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Fuel Lines & Accessorie
5 Hole Gasket for Electric and Mechanical Sending Units.
Part No: 035728-10
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Watermakers->Prefilters
These polyester prefilter cartridges help filter out larger sediment to ease the demands placed on your watermaker.
Part No: 8012861
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Rags, Gloves And Buckets
Handy small pail with many usesCompact plastic pail for small jobs. Usefull for mixing paint and for brush and tool cleanup.
Part No: 61080
|
|
|
|
An affordable and good performance choice is our Economy Vinyl-Coated Polyester covers with 210 denier fabric. Offers superior water repellancy but will not breathe, so allow boat to dry before covering.
Part No: 70013
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-11
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-31
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-05
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-32
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 504-11
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 505-11
|
|
|