Large Funnel - 5GPM, 10"H x 8-1/2"Dia., 100 Micron from WEST MARINE
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.

Drop-In Hidden Horn from AFI
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .

29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.

Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .

Wet/Dry Sandpaper (AO) - P500A-Grit from 3M PRODUCTS
3M Imperial Wetordry Sanding Sheet, 9" x 11" Used in wet sanding, fine featheredging or last final sanding step before priming. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product. 500G.

101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.

High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.

Scotch-Brite Surface Roloc Disc - 3", Coarse, 50Pk from 3M PRODUCTS
Cleaning and surface preparation 3" Coarse.

Chafe Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.

Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.

5200 Polyurethane Adhesive/Sealant, White, 3oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .

5200 Polyurethane Adhesive/Sealant, White, 1oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .

WetOrDry™ Finishing Sandpaper - Ultra Fine 600 Grit, 5 Pack from 3M PRODUCTS
Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth.

Scotchgard Marine Liquid Wax, 500ml from 3M PRODUCTS
Durable wax actually bonds to your boat's surfaceSpecial formulation uses reactive chemistry to actually bond to your boat’s surface and provide exceptionally high gloss with lasting durability. Protects gelcoat and topside coatings from damaging ultraviolet radiation, and is excellent for use on gelcoat, topside paints, painted aluminum and marine metal parts. Uses reactive chemistry to bond to your boat's surface. Exceptionally high gloss with lasting durability.

Marine Mildew Block from 3M PRODUCTS
Helps keep your boat fresh and looking like newUnique non-toxic formula provides long-lasting protection to help keep your boat fresh and looking like new. Works on virtually all surfaces above the waterline, including sails, seat cushions, carpeting, canvas, deck furniture, rub rails, showers, boat covers and vinyl. 16. 9oz. 16. 9oz.