Top Sellers
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
Anchor Safety Strap from LEWMAR
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
|
Large Funnel - 5GPM, 10"H x 8-1/2"Dia., 100 Micron from WEST MARINE
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.
|
Portable Cabin Heater from WEST MARINE
Melt away the morning chill! This ultra-quiet heater is perfect for boats, homes and offices. Versatility and simplicity with three heat settings—1500W (5200Btu), 900W (3120Btu) and “energy saver” 600W (2080Btu), which draws just 5A. Adjustable thermostat control keeps you comfortable. Antifreeze setting automatically turns on when temperature drops to 38°F. Overheat protector will not clog with dust or dirt. Draw: 5A–13A. Warranty: Three years.
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
Wet/Dry Sandpaper (AO) - P500A-Grit from 3M PRODUCTS
3M Imperial Wetordry Sanding Sheet, 9" x 11" Used in wet sanding, fine featheredging or last final sanding step before priming. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product. 500G.
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
|
|
Chafe Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
|
5200 Polyurethane Adhesive/Sealant, White, 3oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
5200 Polyurethane Adhesive/Sealant, White, 1oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .
|
WetOrDry™ Finishing Sandpaper - Ultra Fine 600 Grit, 5 Pack from 3M PRODUCTS
Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth.
|
Marine Mildew Block from 3M PRODUCTS
Helps keep your boat fresh and looking like newUnique non-toxic formula provides long-lasting protection to help keep your boat fresh and looking like new. Works on virtually all surfaces above the waterline, including sails, seat cushions, carpeting, canvas, deck furniture, rub rails, showers, boat covers and vinyl. 16. 9oz. 16. 9oz.
|
|
5" from 3M PRODUCTS, 8" from 3M PRODUCTS, 100 Disc Qty from 3M PRODUCTS
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Double-Molded Profiles
Commercial-grade, double-molded PVC dock edging is industrial strength to suit the needs of dock builders, marinas and large boat owners.
Part No: 46032
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Double-Molded Profiles
Commercial-grade, double-molded PVC dock edging is industrial strength to suit the needs of dock builders, marinas and large boat owners.
Part No: 46019
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Double-Molded Profiles
Commercial-grade, double-molded PVC dock edging is industrial strength to suit the needs of dock builders, marinas and large boat owners.
Part No: 46020
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
Part No: 1684-6
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless-Steel Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Part No: 78-31
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop. To disconnect, push in on fitting collar and hold down while removing pipe.
Part No: 002443-0415
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-71
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders
Poly Rod Rack Durable polyethylene to withstand the harsh marine environment. Flared rod holder for easy rod handling. Slotted rod holders lock in most conventional & spinning outfits. Deluxe racks feature convenient integrated slots for knife & pliers. Light racks feature closer rod holder spacing; ideal when space is limited. 4-Rod Poly Rod Rack.
Part No: P03-064W
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01819
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01818
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Gold 236U Sanding Discs
Economical, tough paper-backed discs offer long life and a consistent finish. Aluminum oxide mineral with a non-staining Fre-Cut coating resists loading. Excellent for gel coat, wood and plastic applications.
Part No: 86470
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->6" Stikit Gold Film 260L Regular Disks
No-hole, film-backed disks for use in: Scuffing or sanding prior to painting. Removing runs, or orange peel. Also used as a final step prior to compounding .
Part No: 01318
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Gold 236U Sanding Discs
Economical, tough paper-backed discs offer long life and a consistent finish. Aluminum oxide mineral with a non-staining Fre-Cut coating resists loading. Excellent for gel coat, wood and plastic applications.
Part No: 86471
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01816
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Gold 236U Sanding Discs
Economical, tough paper-backed discs offer long life and a consistent finish. Aluminum oxide mineral with a non-staining Fre-Cut coating resists loading. Excellent for gel coat, wood and plastic applications.
Part No: 86472
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Stikit Paper Disc Roll
Aggressive, sharp, fast cutting and long lasting. Resists loading and the pressure-sensitive adhesive ensures excellent adhesion to 3M™ Stikit™ pads.
Part No: 86492
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper
Aggressive, sharp, fast cutting and long lasting discs. Their construction also resists dulling, loading and edge wear.
Part No: 1489
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01815
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Gold 236U Sanding Discs
Economical, tough paper-backed discs offer long life and a consistent finish. Aluminum oxide mineral with a non-staining Fre-Cut coating resists loading. Excellent for gel coat, wood and plastic applications.
Part No: 86473
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Stikit Paper Disc Roll
Aggressive, sharp, fast cutting and long lasting. Resists loading and the pressure-sensitive adhesive ensures excellent adhesion to 3M™ Stikit™ pads.
Part No: 86493
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Gold 236U Sanding Discs
Economical, tough paper-backed discs offer long life and a consistent finish. Aluminum oxide mineral with a non-staining Fre-Cut coating resists loading. Excellent for gel coat, wood and plastic applications.
Part No: 86475
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Stikit Paper Disc Roll
Aggressive, sharp, fast cutting and long lasting. Resists loading and the pressure-sensitive adhesive ensures excellent adhesion to 3M™ Stikit™ pads.
Part No: 86495
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Gold 236U Sanding Discs
Economical, tough paper-backed discs offer long life and a consistent finish. Aluminum oxide mineral with a non-staining Fre-Cut coating resists loading. Excellent for gel coat, wood and plastic applications.
Part No: 86476
|
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper -> Sandpaper Discs->Stikit Paper Disc Roll
Aggressive, sharp, fast cutting and long lasting. Resists loading and the pressure-sensitive adhesive ensures excellent adhesion to 3M™ Stikit™ pads.
Part No: 86496
|
|
|
|
Home -> Engine Systems -> Engine Parts->Replacement Fuel Water Separator Elements
Remove harmful contaminants without filtering detergent additivesRemove harmful contaminants without filtering detergent additives. Engineered for long life, low restriction and efficient filtering performance.
Part No: 18-7942
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock De-Icers->P500 Ice Eaters
The P500 de-ices diameter of approximately 40 feet Prevent damaging ice formation around your boat’s hull with a 1/2 hp energy efficient Ice Eater. Motor is matched with a permanent-split capacitor to ensure quick, high-torque and smooth operation from the single-phase induction motor. Copper, stator motor windings are double-insulated, to guard against water. Internal, hard-faced mechanical seal is itself immersed in dielectric lubricating fluid and protects the motor against water intrusion.
Part No: P500/115/100
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock De-Icers->P500 Ice Eaters
The P500 de-ices diameter of approximately 40 feet Prevent damaging ice formation around your boat’s hull with a 1/2 hp energy efficient Ice Eater. Motor is matched with a permanent-split capacitor to ensure quick, high-torque and smooth operation from the single-phase induction motor. Copper, stator motor windings are double-insulated, to guard against water. Internal, hard-faced mechanical seal is itself immersed in dielectric lubricating fluid and protects the motor against water intrusion.
Part No: P500/115/100/30
|
|
|
