7' Ugly Stik Combo, Saltwater Spinning; 4.6:1 Gear Ratio; Medium Action from SHAKESPEARE
Shakespeare's versatile Ugly Stik combos give the anger plenty of casting power to deliver bait to crafty and boat-wary fish. The two piece rods feature Fuji reel seats and EVA grips to maximize sensitivity and response to light strikes and the Shakespeare spinning reel sports stainless bearings, graphite frame, and aluminum spools for fast, smooth retrieval and reliable casts. Style: Saltwater Spinning . Target Species: Big Water/Light Tackle Targets . Rod Type: Conventional Ugly Stik .

Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.

Ocean 3000 Dyneema Single Braid Line, Blue, 3mm, 1,920lb. Breaking Strength from RONSTAN U.S. INC.
A 12-strand single-braid line made of pure Dyneema for high strength with low weight. Perfect for tackles, loops, halyards and runners. Treated with the S. Y. I. S. impregnation system to improve resistance to UV and abrasion. 12-plait Dyneema® SK 75 line, treated with S. Y. I. S.

Ocean 3000 Dyneema Single Braid Line, Gray, 4mm, 3,840lb. Breaking Strength from RONSTAN U.S. INC.
A 12-strand single-braid line made of pure Dyneema for high strength with low weight. Perfect for tackles, loops, halyards and runners. Treated with the S. Y. I. S. impregnation system to improve resistance to UV and abrasion. 12-plait Dyneema® SK 75 line, treated with S. Y. I. S.

Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.

Premium Fishing Rod Rack from WEST MARINE
Display your rods conveniently in a handsome solid wood rack! Proudly showcase and store your rods and reels in this attractive rolling rod rack. Fine furniture quality rack features locking casters that keep it from rolling around onboard and its glossy finish makes it a great addition to any room. Spooled design fits multiple rod sizes, even nets! Holds up to 24 rods, nets or gaffs. Easy assembly with all parts and tools included. 27" x 32" x 13".

Beer Can Swim Trunks, Khaki, XL from HOOK & TACKLE®
Lightweight swim trunks with real pockets! Sporty, lightweight, quick-drying trunks have cargo side pockets and secure zip pocket on the inside waistband. Imported . Men’s sizes M-XXL .

3-to-1 Lifesling Hoisting Tackle for Sailboats from LIFESLING
Includes a fiddle block, a single block with carabiner, 65' of 3/8" dacron braid and a nylon storage bag.

Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.

Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.

Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .

Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.

Water Spike Anchor, 22'-35' from MARINETECH PRODUCTS
WaterSpike will hold tightly on the lake bottom and release just as easy. The number one anchor used by professional anglers, the WaterSpike is the last anchor you will ever own. For boats 22-35 feet. . Incredibly light weight. Only 16lbs! . Unmatched holding power in hard or soft bottoms. . Unique Sliding Ring design guarantees release everytime. . Completely collapsible for easy storage.

29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.

12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.