Welcome! Please Sign-In
Top Sellers
Replaces OMC P/N 378444 from SIERRA
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
For Chrysler/Force, 89-817109A2 from SIERRA
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
CARB GASKET KIT from SIERRA
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Yamaha Carb Kit from SIERRA
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
Impeller, 18-3062 from SIERRA
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
Spark Plug, BR6FIX from NGK SPARK PLUGS
Spark Plug, BR6FIX from NGK SPARK PLUGS
Iridium-plated electrodes gives these plugs superior performanceIridium IX Spark Plugs are the most technologically advanced high performance plugs available. Featuring a 0. 6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.
Spark Plug, IZFR6K-11 from NGK SPARK PLUGS
Spark Plug, IZFR6K-11 from NGK SPARK PLUGS
Iridium-plated electrodes gives these plugs superior performanceIridium IX Spark Plugs are the most technologically advanced high performance plugs available. Featuring a 0. 6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
30GPH Cartridge, Replaces Racor S3240 from SIERRA
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
60GPH Cartridge, Replaces Racor S3227 from SIERRA
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
Ngk Spark Plug, BP8H-N-10 from NGK SPARK PLUGS
Ngk Spark Plug, BP8H-N-10 from NGK SPARK PLUGS
NGK spark plugs are designed to operate over a much wider heat range than ordinary plugs. Each NGK features high alumina ceramics for better heat transfer and electrical insulation. Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
O/B Plug Type - QL78YC, Champ #938 from CHAMPION SPARK PLUGS
O/B Plug Type - QL78YC, Champ #938 from CHAMPION SPARK PLUGS
High-quality plugs with all the features that make Champion the industry’s leader. Triple-coated shell for excellent corrosion resistance. Triple seal assembly that’s the strongest in the industry. Precision rolled threads that conform to all manufacturers’ specs. * Q and R type plugs only. Some plugs have been redesigned to accommodate the different heat ranges required for reformulated fuel. Before you order a spark plug, be sure to consult the manufacturer’s most current reference guide.
Ngk Plug-ZFR7F from NGK SPARK PLUGS
Ngk Plug-ZFR7F from NGK SPARK PLUGS
NGK spark plugs are designed to operate over a much wider heat range than ordinary plugs. Each NGK features high alumina ceramics for better heat transfer and electrical insulation. Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.

Plug from SIERRA, Plate from SIERRA, Plug from MARINCO, End from SIERRA

Plate from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Plate-End Commutator|**Plate-End Commutator.
Part No: 18-6254
Plate from SIERRA Home -> Engine Systems -> Engine Parts
**Plate-End Manifold|**Plate-End Manifold.
Part No: 18-1941
Plate from SIERRA Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Tool-Plate/Puller Bar|**Tool-Plate/Puller Bar.
Part No: 18-9814
Plate from SIERRA Home -> Engine Systems -> Engine Parts
**End Plate|**End Plate.
Part No: 18-5021
Plate with Bullseye/150 Cam, 1-1/4" Height, 300lb. SWL, 1/8" to 1/2" Line dia., Fasteners Included from HARKEN Home -> Sailboat -> Cleats & Stoppers->Cam Bases
Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used.
Part No: 238
Plate with Bullseye/365 Cam, 1-1/4" Height, 150lb. SWL, 1/8" to 5/16" Line dia., Fasteners Included from HARKEN Home -> Sailboat -> Cleats & Stoppers->Cam Bases
Swivels ride on two rows of ball bearings for smooth, effortless pivoting even under high loads. Use #144 and #205 for mainsheets on dinghies and small offshore boats. #144 has a tall arm for use with bigger blocks. The low-profile 205 is used at the deck level and when smaller blocks are used.
Part No: 239
Plate, Block Off from SIERRA Home -> Engine Systems -> Engine Parts->Manifold Cover Plates
Fits Chris Craft, Crusader, Mercruiser, OMC/Cobra sterndrive, Pleasurecraft and Volvo Penta.
Part No: 18-1917
Plate, End from SIERRA Home -> Engine Systems -> Engine Parts -> Cooling Systems->Manifold Cover Plates
Fits Chris Craft, Crusader, Mercruiser, OMC/Cobra sterndrive, Pleasurecraft and Volvo Penta.
Part No: 18-1912
Plate, Front End from SIERRA Home -> Engine Systems -> Engine Parts->Manifold Cover Plates
Fits Chris Craft, Crusader, Mercruiser, OMC/Cobra sterndrive, Pleasurecraft and Volvo Penta.
Part No: 18-1911
Platform Mounts from ST. CROIX MARINE Home -> Boats & Motors -> Inflatable Boats
Platform Mount shown here is used on extended swim platforms and provides a secure mounting area for davits. Tubular stainless steel bracket .
Part No: 401
Platinum SD N East US and Canyons from NAVIONICS Home -> Electronics -> Global Positioning Systems->Navionics Platinum
Plug-and-play cartridges are packed with data and ready for use! New Platinum charts, available in huge XL3 sized coverage areas come on pre-programmed 2GB cartridges—packed with data and ready to use. Just plug into a compatible plotter and you’ve got immediate access to all the fishing and navigation information found on your favorite paper charts. 3-dimensional views allow you to "flythrough" your route, showing depths, dimension and an optional photo overlay .
Part No: SD/904P
Platinum SD West Great Lakes from NAVIONICS Home -> Electronics -> Global Positioning Systems->Navionics Platinum
Plug-and-play cartridges are packed with data and ready for use! New Platinum charts, available in huge XL3 sized coverage areas come on pre-programmed 2GB cartridges—packed with data and ready to use. Just plug into a compatible plotter and you’ve got immediate access to all the fishing and navigation information found on your favorite paper charts. 3-dimensional views allow you to "flythrough" your route, showing depths, dimension and an optional photo overlay .
Part No: SD/900P
PLB Dive Canister from MCMURDO Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival
It is designed to protect the Fastfind PLB range from the harsh diving environment. Turned from a solid block of marine grade aluminium, anodised to 25 microns and pressure tested to 150mtrs (500ft), the canister is designed to be opened at the surface allowing quick and easy access. The double ring seal protects the threads providing watertight integrity to 15atm, preventing ingress of sand or other debris, and a convenient nylon clip is provided to attach the Canister.
Part No: 85-754A
Plier Kit with Sheath Kit from CALCUTTA OFFSHORE BA Ultra Grip 6" Long Nose/ Cutter/ Sheath Kit From the Corrosion Resistant "CR" Series Tools coated with a nickel matte finish to protect against corrosion. Specially formulated forged steel provides unmatched strength and durability. Custom Ultra-Grip handles give you a comfortable non-slip grip under all conditions.
Part No: C6CRKIT
Plug & Receptacle from MARINCO Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->Premium 12V Receptacle and Plug
Designed to withstand the rigors of wet environments and constant motion. Receptacle has large contact surfaces and corrosion-resistant materials to ensure a solid contact and low voltage drop. Plug has a sealing ring around the shaft to keep out spray and to make it seat firmly in the outlet. Ground contacts engage the receptacle so the plug can’t be removed without turning it 90°.
Part No: 12VPK
Plug & Receptacle from MARINCO Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->ConnectPro Trolling Motor Plug & Receptacle
Vibration-resistant, 12V trolling motor connectors incorporate a locking plug and waterproof “O” ring seal for a superior connection for 12V, 24V, 36V and combination systems.
Part No: 12VCP
Plug & Socket Kit from SCOTTY DOWNRIGGERS Home -> Fishing -> Fishing Accessories->Electric Plug and Socket
Electric plug and socket for use with Depthpower electric models.
Part No: 1125
Plug Boss, Neoprene 1" T-Handle from MJS MANUFACTURING Home -> Engine Systems -> Engine Parts->Plug Boss
Don’t forget to install your trailerable boat’s drain plug and get that sinking feeling! Get the Plug Boss instead. Put the bright red anodized aluminum plug holder in the most logical place possible, on the trailer winch handle, and never forget to reinstall your drain plug when you launch your boat (or remove it when you haul out). Choose a Plug Boss to fit either the 1" rubber tee handle drain plug or a 1/2" pipe threaded bronze drain plug.
Part No: 2401
Plug from MARINCO Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->Premium 12V Receptacle and Plug
Designed to withstand the rigors of wet environments and constant motion. Receptacle has large contact surfaces and corrosion-resistant materials to ensure a solid contact and low voltage drop. Plug has a sealing ring around the shaft to keep out spray and to make it seat firmly in the outlet. Ground contacts engage the receptacle so the plug can’t be removed without turning it 90°.
Part No: 12VPG
Plug from MERCURY MARINE Home -> Engine Systems -> Engine Parts
PLUG KIT.
Part No: 806608Q01
Plug from SCOTTY DOWNRIGGERS Home -> Fishing -> Fishing Accessories->Electric Plug and Socket
Electric plug and socket for use with Depthpower electric models.
Part No: 1127
Plug from SIERRA Home -> Engine Systems -> Engine Parts
**Plug-Expansion (5)|**Plug-Expansion (5).
Part No: 18-4245-9
Plug from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Plug-Welch|**Plug-Welch.
Part No: 18-4272
Plug from SIERRA Home -> Engine Systems -> Engine Parts
**Plug-Expansion (5)|**Plug-Expansion (5).
Part No: 18-4247-9
Plug from SIERRA Home -> Engine Systems -> Engine Parts
**Plug-Expansion (5)|**Plug-Expansion (5).
Part No: 18-4246-9
Plug from SIERRA Home -> Engine Systems -> Engine Parts
**Plug|**Plug.
Part No: 18-0826
Plug from SIERRA Home -> Engine Systems -> Engine Parts
**Plug-Expansion|**Plug-Expansion.
Part No: 18-4247
Plug from SIERRA Home -> Engine Systems -> Engine Parts
**Plug-Expansion|**Plug-Expansion.
Part No: 18-4200
Plug from SIERRA Home -> Engine Systems -> Engine Parts
**Plug-Expansion|**Plug-Expansion.
Part No: 18-4245
Plug from SIERRA Home -> Engine Systems -> Propellers & Drive Trains
**Plug ( 5)|**Plug ( 5).
Part No: 18-3232-9
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12