Top Sellers
316 Stainless-Steel Hose Clamp, 7/16" to 11/16", SAE Size 3 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
|
304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
|
Power Trim & Steering Fluid, 32oz. from QUICKSILVER
A universal hydraulic fluid designed to mix with all hydraulic fluids, protect seals and hoses, and prevent foaming, oxidation and corrosion.
|
Power Trim & Steering Fluid, 8oz. from QUICKSILVER
A universal hydraulic fluid designed to mix with all hydraulic fluids, protect seals and hoses, and prevent foaming, oxidation and corrosion.
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).
|
Mast Boot Fitting Mast to 23", Collar Size to 37" from SAILING SPECIALTIES, INC.
Easily installed over stepped masts by slitting one side, trimming to fit, and gluing with adhesive supplied. Secure with stainless hose clamps. May not fit rectangular wooden masts. Flexible, UV-resistant plastic.
|
Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Series 315 Outboard Fuel Hose - 3/8"ID from SHIELDS RUBBER
Premium-quality fuel hose designed for outboard feed and vent lines. Remains flexible at low temperatures and resists UV sunlight. Silverado 2000 complies with SAE J1527 Type B2 specifications. Should not be used in applications requiring the use of Type B1 fuel feed line.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights RailLight charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.
|
Straight Adapter, 30A Male/15A Female (straight blade, not locking, connections) from MARINCO
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.
|
WM Self-Coiling Hose - 15' from WEST MARINE
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
|
Power Tilt & Trim Fluid - Quart from WEST MARINE
Formulated to provide viscosity and lubricity necessary for proper pump performance and seal life. Combats high operating pressures and resists rust.
|
|
Power, 10-Pack from ABA OF AMERICA, Power-Seal Construction Hose Clamps
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63020
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63024
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63028
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63032
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63036
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63040
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63044
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63048
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63052
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63056
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63060
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63064
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63072
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63080
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63088
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->Power-Seal® High Corrosion-Resisting Clamps
High corrosion-resistant stainless-steel clamps necessary for marine, underground, and other high-corrosion applications.
Part No: 63096
|
|
|
|
Home -> Electronics -> Global Positioning Systems->GPS Accessories
Accessories for Garmin Marine GPS systems: Rail Mount Power Data Cable - Bare Wires Marine Data Management Kit And more! .
Part No: 010-10529-00
|
|
|
|
Home -> Electronics -> Fishfinders -> Transducers and Accessories->Assorted Power and Data Cables
A variety of cables for Garmin products.
Part No: 010-10082-00
|
|
|
|
Home -> Electronics -> Fishfinders -> Transducers and Accessories
This power and data cable has bare wires at the end so you can hard wire your GPS or fishfinder directly to a DC power source or some other electronic device. This allows you to send speed and position data to devices such as a chartplotter, computer, auto pilot, radar, etc. Compatible products for this item are: Fishfinder 100. Fishfinder 100 Blue. Fishfinder 140. Fishfinder 160. Fishfinder 160 Blue. Fishfinder 160C. Fishfinder 240. Fishfinder 240 Blue. Fishfinder 250.
Part No: 010-10145-00
|
|
|
|
Home -> Electrical -> Meters & Distribution -> High Amp Distribution
The highest amperage bus connector available! 3/8"studs on a tin-plated copper bus. Designed for use as a main DC negative or positive bus on larger boats. Terminal Material: Stainless Steel . DC Rating: 600A@48V . AC Rating: 545A@300V . Base Material: Lexan Polycarbonate . Mounting Hardware: Four 1/4" RH screws (not included). Insulating Cover Available: Sold separately (4-stud) . Warranty: Five years.
|
|
|
|
Home -> Electrical -> Meters & Distribution -> High Amp Distribution->PowerBar 600A
The highest amperage bus connector available! 3/8"studs on a tin-plated copper bus. Designed for use as a main DC negative or positive bus on larger boats. Terminal Material: Stainless Steel . DC Rating: 600A@48V . AC Rating: 545A@300V . Base Material: Lexan Polycarbonate . Mounting Hardware: Four 1/4" RH screws (not included). Insulating Cover Available: Sold separately (4-stud) . Warranty: Five years.
Part No: 2019
|
|
|
|
Home -> Electrical -> Meters & Distribution->PowerBar 600A
The highest amperage bus connector available! 3/8"studs on a tin-plated copper bus. Designed for use as a main DC negative or positive bus on larger boats. Terminal Material: Stainless Steel . DC Rating: 600A@48V . AC Rating: 545A@300V . Base Material: Lexan Polycarbonate . Mounting Hardware: Four 1/4" RH screws (not included). Insulating Cover Available: Sold separately (4-stud) . Warranty: Five years.
Part No: 2104
|
|
|
|
Home -> Electrical -> Meters & Distribution -> High Amp Distribution->PowerBar 600A
The highest amperage bus connector available! 3/8"studs on a tin-plated copper bus. Designed for use as a main DC negative or positive bus on larger boats. Terminal Material: Stainless Steel . DC Rating: 600A@48V . AC Rating: 545A@300V . Base Material: Lexan Polycarbonate . Mounting Hardware: Four 1/4" RH screws (not included). Insulating Cover Available: Sold separately (4-stud) . Warranty: Five years.
Part No: 2107
|
|
|
|
Home -> Books & Videos -> Videos & DVDs->Navigation, Piloting & Seamanship DVD's
Through screen examples and hands-on demonstrations, you'll learn the most important features of Navigation, Piloting & Seamanship.
Part No: N375DVD
|
|
|
|
Home -> Books & Videos -> Books
It advises readers of necessary boating supplies, safety concerns and equipment, accessories, and includes locations of boating facilities, and how to safely pilot the ship.
Part No: WIL044
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches
The XX Powerclutch holds 50% higher loads than any conventional clutch, yet is smooth and controlled to release. Optimized for high performance line 5/16" to 1/2", the XX is the only secure solution for genoa and spinnaker halyards on performance yachts 35-50ft. Easy on-deck access for removing complete internal assembly, and an access port for fresh water flushing make this a versatile and robust clutch. Dimensions: 3. Line Dia: 5/16" to 1/2" (8 to 12mm) .
Part No: XX0812
|
|
|
|
Home -> Electrical -> Shore Power->PowerCord PLUS® Adapters
PLUS version adapter with LED power indicator lights, contoured grip end and thumbprint locator on connector end.
Part No: 104SPP
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->PowerCord PLUS® Adapters
PLUS version adapter with LED power indicator lights, contoured grip end and thumbprint locator on connector end.
Part No: 105SPP
|
|
|
|
Home -> Fishing -> Trolling Motors->PowerDrive V2 Pontoon Motors
Features a new deploy-assist lever that puts you in motion and in pursuit of fish quickly and easily. Includes a quick release bracket ideal for fishing or for quickly removing the motor for maximum versatility. US2 model features dual beam capability providing expanded coverage, greater bottom detail and temperature sensing compatibility with all major sonar brands. Navigating the waters is like second nature with the new 70- and 55-lb. thrust Hand Control units for your pontoon boat.
Part No: 1358712
|
|
|
|
Home -> Fishing -> Trolling Motors->PowerDrive V2 Pontoon Motors
Features a new deploy-assist lever that puts you in motion and in pursuit of fish quickly and easily. Includes a quick release bracket ideal for fishing or for quickly removing the motor for maximum versatility. US2 model features dual beam capability providing expanded coverage, greater bottom detail and temperature sensing compatibility with all major sonar brands. Navigating the waters is like second nature with the new 70- and 55-lb. thrust Hand Control units for your pontoon boat.
Part No: 1358750
|
|
|