Top Sellers
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
|
Power Pack - Johnson/Evinrude -18-5758 from SIERRA
Replacement part for Johnson/Evinrude Outboard #582453, 583380 OEM #0582452.
|
3/8 inch inline fuel filter from SIERRA
For use on McCulloch/Scott-Atwater, Suzuki Outboard and Yamaha Outboard 18-7831 is replacement for Johnson/Evinrude Outboard #398319.
|
Outdrive Gasket Set, 18-260, TR/TRS, 1973-1993 from SIERRA
Gasket and O-ring kits that seal the drive to the transom.
|
|
Propnut from SIERRA, Evinrude from SIERRA, Prop Wrench Kit from SIERRA
|
|
Home -> Engine Systems -> Engine Parts
10 per package.
Part No: 18-3204-9
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
10 per package.
Part No: 18-3200-9
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts
Six solid-bronze tools in one, to help you to remove and install propeller nuts, cotter pins and prop nut keepers. Works on most larger outboards including Mercury/Mariner 75hp and up, Suzuki and Yamaha 55hp and up, and OMC 60hp and up. Fits most stern drives with 1 1/16'' or 1 1/4'' prop nuts.
Part No: PPF-108
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Inboard Prop Removal Tool
Removes two-, three-, most four- and and some five-bladed propellers with shafts from 1"–3"dia. Forked-end slips behind the prop hub even when clearance is tight. A recess on the shaft end prevents slippage. High-strength steel.
Part No: PPF-107
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Inboard Prop Removal Tool
Removes two-, three-, most four- and and some five-bladed propellers with shafts from 1"–3"dia. Forked-end slips behind the prop hub even when clearance is tight. A recess on the shaft end prevents slippage. High-strength steel.
Part No: PPF-103
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->3 and 4 Blade Prop Removal Kit or Tool
PRO-PULL Kits let you quickly remove 3- and 4-blade propellers from inboard shafts with a 3/4'' to 1 1/8'' diameter. The tool is made of heat-treated steel and features fine-thread screws for tremendous pulling force with very little effort. Kit also includes: Prop nut wrench, stainless cotter pin, brass prop-shaft key. Brass nylock prop nut, waterproof grease, and a rustproof carrying case.
Part No: PPF-101
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
Slide onto propeller blades to protect boats, blades and people. Highly visible plastic has reflective surfaces. Reduce the chance of being rear-ended while towing your boat, day or night.
Part No: 00450
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
Replaces: 323943.
Part No: 18-4232
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
For on the water repairs!This 1-1/16in yellow six point socket style prop wrench is a must-have item for on-the water repairs.
Part No: 89001A
|
|
|
|
Home -> Engine Systems -> Engine Parts
Kit contains: 18-3200 - Tab Washer (2). 18-3700 - Prop Nut (1). 18-4444 - Prop Wrench (1).
Part No: 18-4446
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->PropSpeed
New performance coating for propellersUnlike conventional antifouling paint which does not adhere well to underwater metal, or when it does, reduces performance, this unique, environmentally-friendly, two-part coating system bonds to your boat’s propeller and running gear with no recoating needed for a year or more. Its “foul release” formulation reduces drag by preventing marine growth from attaching, resulting in fuel savings, and improved top end speed and performance.
Part No: PS-784-1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->PropSpeed
New performance coating for propellersUnlike conventional antifouling paint which does not adhere well to underwater metal, or when it does, reduces performance, this unique, environmentally-friendly, two-part coating system bonds to your boat’s propeller and running gear with no recoating needed for a year or more. Its “foul release” formulation reduces drag by preventing marine growth from attaching, resulting in fuel savings, and improved top end speed and performance.
Part No: PS-784-5
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables -> Barbecues And Mounts->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-154
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-453
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems
Connection kit includes: High-pressure T to install between main tank and regulator or pigtail POL. 6' hose with pre-assembled, leak-tested fittings. . Attach to high-pressure T on one end and BBQ on the other.
Part No: G-415-72
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-665
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Marine Kettle Gas Grill Replacement Parts
Replacement parts for Magma Marine Kettle Gas Grill - refer to Magma part number for correct replacement part. Fits models: A10-005.
Part No: 10-657
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Stoves Without Ovens
Force 10's best seller can be built-in or gimballed. Features include true infrared broiler, 5,000BTU and 8,000BTU propane burners, swing-up grill for easy cleaning. Includes adjustable pot holders and gimbal lock. Cutout: 20. 5"W x 15. 875"H x 18"D. Configuration: Two Burner Stove. Exterior Cabinet Material: Stainless Steel. Burners: Two. Heat Output: 8,000BTU/5,000BTU. Safety Features: Thermocouple Gas Shut Off, Pot Holders, Gimbal Lock.
Part No: 60150
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems
Propane plumbing adapter 3/8" Male Flare to 3/8" Male NPT Between 3/8" propane NPT solenoid and propane supply hose.
Part No: 600-3838
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables
propane bottles outside of your boat for safety.
Part No: A10-210PB
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->Propeller Locks
Protect yourself against expensive propeller theft. Machined from naval brass and hardened stainless steel, this lock features a free-spinning collar that will turn if attacked by gripping tools, without loosening the lock. Replaces the original propeller nut and washer . Mercruiser: Alpha I, Bravo I, TRS . OMC: Cobra and Ding Cobra . Outboards Mercury/Mariner: 70 hp and larger .
Part No: 74039
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Drive Train Parts->Propeller Locks
Protect yourself against expensive propeller theft. Machined from naval brass and hardened stainless steel, this lock features a free-spinning collar that will turn if attacked by gripping tools, without loosening the lock. Replaces the original propeller nut and washer . Mercruiser: Alpha I, Bravo I, TRS . OMC: Cobra and Ding Cobra . Outboards Mercury/Mariner: 70 hp and larger .
Part No: 74052
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Propeller Nut Kit s Yamaha
PROP NUT KIT YAMAHA -6H1|PROP NUT KIT YAMAHA -6H1.
Part No: 18-3782D
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Nut-Prop Kit|**Nut-Prop Kit.
Part No: 18-3775
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Nut-Prop (5)|**Nut-Prop (5).
Part No: 18-3707-9
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Nut-Prop (5)|**Nut-Prop (5).
Part No: 18-3706-9
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Nut-Prop Kit|**Nut-Prop Kit.
Part No: 18-3755D
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Nut-Prop Kit|**Nut-Prop Kit.
Part No: 18-3736
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Nut-Prop Kit|**Nut-Prop Kit.
Part No: 18-3777
|
|
|