Top Sellers
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
|
|
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
|
Quick Flush - OMC from T-H MARINE
Makes flushing salt or sand from your motor quick and easy. Quick-connect hose snaps onto valve for flushing. Unique, patented slide valve replaces flush port plug and "O" ring seal closes off port when engine is operating. Fits all outboards equipped with a flushing port.
|
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
PLB Dive Canister from MCMURDO
It is designed to protect the Fastfind PLB range from the harsh diving environment. Turned from a solid block of marine grade aluminium, anodised to 25 microns and pressure tested to 150mtrs (500ft), the canister is designed to be opened at the surface allowing quick and easy access. The double ring seal protects the threads providing watertight integrity to 15atm, preventing ingress of sand or other debris, and a convenient nylon clip is provided to attach the Canister.
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
|
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
|
Quick Attach Stud, 4" Thread from SUNCOR
|
|
Home -> Sailboat -> Rigging Products->Quick Attach™ Stud & Toggle Turnbuckles
Fittings are precision machined from 316 stainless steel Holding power of at least 90% of the maximum breakload of the wire rope used The wire will always break before the fitting even gets distorted Very fast attachment to any type of cable (1x19, 7x19, or 7x7) using only simple tools.
Part No: C0764-0704
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-2013
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-2013
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1307
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1307
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1007
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1007
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-0703
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-0703
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-1610
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-2012
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1005
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1005
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-0905
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-0905
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1610
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1610
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-0603
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-0604
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-0804
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1309
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1309
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-1609
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-1609
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-0704
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-0704
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0772-0904
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0771-0904
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-1005
|
|
|
|
Home -> Cordage -> Rigging Products->Quick Attach™ Stud Swage Fitting
The advantage of "Quick Attach" over conventional fittings is the arrangement of the wedges on the outside of the cable which makes assembly much easier and allows different types of wire to be used with the same fitting. The Suncor Quick Attach Stud mechanical swage fitting allows very fast attachment to any type of cable (1X19, 7X19, or 7X7) using only simple tools. Working Load Limit (WLL) is determined by the WLL of the wire being used.
Part No: C0775-0805
|
|
|