Top Sellers
$100 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
$250 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Portable Cabin Heater from WEST MARINE
Melt away the morning chill! This ultra-quiet heater is perfect for boats, homes and offices. Versatility and simplicity with three heat settings—1500W (5200Btu), 900W (3120Btu) and “energy saver” 600W (2080Btu), which draws just 5A. Adjustable thermostat control keeps you comfortable. Antifreeze setting automatically turns on when temperature drops to 38°F. Overheat protector will not clog with dust or dirt. Draw: 5A–13A. Warranty: Three years.
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
Marine Whistle from WEST MARINE
Keep this powerful, rugged and reliable whistle attached to your PFD. Made for the marine environment, from noncorroding, high-impact plastic. No metal parts.
|
Life Jacket Organizer Bag from WEST MARINE
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
|
Push-Button Portable Signal Horn from WEST MARINE
Blasts a powerful tone for emergency signaling in fog or rescue situations Compact horn blasts a powerful tone for emergency signaling in fog or rescue situations—or anywhere you need signaling power. Simply push the button for an incredibly loud blast. 100% ozone safe. Removable trumpet is unbreakable. 8oz. Type: Portable, push-button . Maximum Decibels: 126dB . Overall Size: 8" tall . Refill Size: 8 oz. .
|
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.
|
|
|
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .
|
Large Funnel - 5GPM, 10"H x 8-1/2"Dia., 100 Micron from WEST MARINE
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.
|
|
|
|
Red from WEST MARINE, 8" from WEST MARINE, Red Shift Knob from SEAFIT
|
|
Home -> Ventilation -> Vents -> Interior Vents->Stainless-Steel Louvered Vents
Attractive little vents to air out small compartments. 304 stainless. Drilled for #6 RH screws. Type: Louvered . Material: 304 Stainless steel .
Part No: 135-71
|
|
|
|
|
Home -> Ventilation -> Vents -> Interior Vents->Stainless-Steel Louvered Vents
Attractive little vents to air out small compartments. 304 stainless. Drilled for #6 RH screws. Type: Louvered . Material: 304 Stainless steel .
Part No: 331400-1WM
|
|
|
|
|
Home -> Ventilation -> Vents -> Interior Vents->Stainless-Steel Louvered Vents
Attractive little vents to air out small compartments. 304 stainless. Drilled for #6 RH screws. Type: Louvered . Material: 304 Stainless steel .
Part No: 135-72
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Exhaust, Manifolds->Rectangular Vernalift Muffler
Designed to fit easily in narrow installation areas, the Rectangular Vernalift's features a unique footprint for snug spaces. The fiberglass body is smooth & strong. Manufactured with fire-retardant self-extinguishing resins. Side inlet/top outlet design.
Part No: 15R2150
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Rectangular Vernalift Muffler
Designed to fit easily in narrow installation areas, the Rectangular Vernalift's features a unique footprint for snug spaces. The fiberglass body is smooth & strong. Manufactured with fire-retardant self-extinguishing resins. Side inlet/top outlet design.
Part No: 15R2200
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Stainless Steel Sinks and Basins
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Part No: S44-1831-UM-D
|
|
|
|
Home -> Engine Systems -> Engine Parts
O/B Rectifier Kit - 4/5Hp.
Part No: 16838A4
|
|
|
|
Home -> Engine Systems -> Engine Instruments->Value Series Engine Instruments
.
Part No: 53210P
|
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5349022
|
|
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5348982
|
|
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5348966
|
|
|
|
Home -> Watersports -> Skindiving Gear->Neoprene Mask Straps
Neoprene strap keeps your hair from being pulled out Very comfortable, and replaces your old strap completely.
Part No: 1025RB
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Deluxe Shoreline Anchor
Compact and lightweight anchor makes quick work of anchoring your boat so you have more time to enjoy yourself. Patented design allows this anchor to drive easily and securely into most shoreline materials including sand, clay, or firm soil, and securely holds boats ranging from runabouts to 40 footers. Stores compactly within 25" and only weighs 14lbs. Style: Auger style land anchor . Material: Coated steel . Application: Sand, clay and firm soil . Best Use: Boats to 40' .
Part No: 180275000025
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Fully Insulated Nylon Disconnects
Fully insulated (nylon covers entire disconnect). Tinned copper.
Part No: 211408
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Economy Stud Mount Sidemarker/Clearance Lights
Combination marker light and reflector mount easily with a single stud. Not recommended for submersible applications. Mounting hardware included. .
Part No: 01-4698-72
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Economy Surface Mount Sidemarker/Clearance Lights
Self-grounding flange mounted lights feature a corrosion-resistant duramold base. Combination marker light with integrated reflector. Not recommended for submersible applications. .
Part No: 01-4639-75
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Inflatable Boat Top Coating
Restore Hypalon or PVC. Remains flexible. Inflatables can be deflated and rolled without cracking the coating. Quart covers 10’ boat.
Part No: TPR-1
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Sealed Over 80"W Sidemarker/Clearance Lights
Mount on trailers over 80" wide for use as a combined side marker and clearance light with reflector. Lens is sonically sealed to base for stability. Easy to mount with a single stud. Pre-wired, mounting hardware included. Fully Submersible. .
Part No: 01-4644-72
|
|
|
|
Home -> Safety -> Flares & Signaling Devices
High-intensity signal burns 60 seconds at 15,000 candlepower High-intensity, short range emergency signal can be used day or night to help rescuers pinpoint your location. Easy to operate pull cord trigger system. Does not produce hot residue that can damage inflatable life rafts. Signal Type: Red hand flare . Light Output: 15,000 candlepower . Deployment Method: Pull cord . Type Approval: USCG, Transport Canada, SOLAS . Replacement Interval: 42 months from manufacture date .
Part No: 802
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 551024
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard™ Fenders
Hull Gard Fenders stay put and won't roll out of position! High-quality utility fenders feature an oval shape that prevents the fender from rolling out of position. A good choice for light duty in protected waters, popular Hull Gard™ fenders combine softness and superior strength to give boaters the maximum protection a utility fender can provide. Made of oil- and chemical-resistant vinyl with a rubber football needle valve.
Part No: 551022
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 551023
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Hull Gard™ Fenders
Hull Gard Fenders stay put and won't roll out of position! High-quality utility fenders feature an oval shape that prevents the fender from rolling out of position. A good choice for light duty in protected waters, popular Hull Gard™ fenders combine softness and superior strength to give boaters the maximum protection a utility fender can provide. Made of oil- and chemical-resistant vinyl with a rubber football needle valve.
Part No: 551028
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Accessories for Ritchie Compasses
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
Part No: SH-0174XSP
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->LED Interior Spot Lights
Power-saving, high-output LED spots feature unique 'non glare' optic technology for powerful light without discomfort to the eyes. The spot generates up to 450 candela for superior brightness and provides more than 75% power savings compared to a 10W halogen bulb. The lamps also feature an outer ring of red or blue LED light for additional ambient illumination. 5W and is switched on independently of the spot function. Chrome bezel. Light Style: LED interior recessed spot with ambient switch .
Part No: 343980511
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Fully Insulated Nylon Disconnects
Fully insulated (nylon covers entire disconnect). Tinned copper.
Part No: 211409
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Momentary Contact Switches
Compact 10A pushbutton switches for horn, starter, and other momentary applications.
Part No: 9187-02-BP
|
|
|
|
Home -> Watersports -> Wakeboards, Kneeboards, Skis & Towables -> Towables
You'll Scream with Delight Riding the Back of "The Red Shark" as it chews up the water at speeds up to 15 mph. This huge six person towable is handcrafted using high quality UV-resistant materials. This 1000 denier PVC commercial Red Shark is designed for use by camps and commercial beach operators. All seams and stainless steel towing brackets are reinforced for long life.
Part No: RSPVC-6
|
|
|
|
Home -> Engine Systems -> Control Systems->Shift Knobs
Replacement Shifter Knobs.
Part No: 35232-001
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Side Lights
Black plastic base For 12, 24 or 36 Volts, bulb not included 112-1/2° Visibility Arc, 2 nm visibility 5-1/4" Overall height; 4-1/4" lens height, Screw size: #10.
Part No: 0109R00BLK
|
|
|
