Top Sellers
SW Inverter/Charger Remote Panel with 50ft. Cable from XANTREX
Designed for use with SW and PS inverter/chargers, the SWRC is a full-function remote control with backlit LCD display. The remote control comes with a standard 25’ (7. 5 m) cable or a 50’ optional (15 m) cable.
|
ProNautic 12120 C3, 120 Amps; 12V; 4 to 6 Battery Banks; 21"L x 8.25"W x 11"H from PROFESSIONAL MARINER
Designed for large battery banks, ProNautic utilizes Battery Balance Control (BBC), allowing smaller group size engine batteries to be charged and maintained while fully charging and conditioning larger 4D and 8D house batteries. The system provides redundancy for all outputs. Includes jumpers, remote and remote control modules. ProNautic also provides real-time maintenance of fully charged batteries for long and short term storage and includes an automatic reconditioning mode every ten days.
|
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
|
Twin Straight Handle Control, Chrome from TELEFLEX
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.
|
|
|
MJB Control from TELEFLEX
External adjustable throttle brake to avoid throttle creep and overcome governor back pressure.
|
Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.
|
Windlass Control Box/Solenoid from LEWMAR
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
Gas Fill & Tank Vent - Black from PERKO
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.
|
4300BC TFX Cable - 20' from TELEFLEX
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
Horizontal Chrome/Brass Masthead Light, Boat Size to 12m (39'4"), 2-3/8"H x 7/8"W from PERKO
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.
|
C-10 Thermostat Controller from KASCO MARINE INC.
Kasco's NEW C-10 Thermostat Controller is designed to save you money on your electric bills The C-10 differs from our existing C-20 Controller, in that, it only uses Air Temperature to operate the De-Icer. Simply use the dial to set a temperature in which you want the De-Icer to turn on and plug the C-10 into a standard 120V outlet.
|
Deckware Mast Harness from SPINLOCK
Ergonomic shape allows a more comfortable fit. Kevlar® covers on the leg straps give essential protection against deck abrasion. Extra wide leg straps: Double the width of a typical climbing harness . Spike pocket: A tapered stretch pocket on the back of the harness belt locates a marlinespike safely and securely, but allows easy access. Sized to fit waists measuring 24-40" (62-101cm) and legs measuring 18-25" (measuring the circumference of your thigh with tensed muscles).
|
|
from PERKO, Remote Control Harness 12m from TELEFLEX
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5901
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5903
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5905
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5902
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5918
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->New & Remanufactured I/O & Inboard Starters
Sierra starters meet SAE or UL standards for ignition protection to prevent explosion. Sierra offers remanufactured and new starters for many applications. They can be mounted two ways. Front mount starters have the drive gear facing aft and spin opposite of the engine rotation. Rear mount starters have the drive gear facing forward and spin in the same direction as the engine. Before replacing your starter, make sure to check for voltage problems. Below are some of the most popular models.
Part No: 18-5906
|
|
|
|
Home -> Electrical -> Flashlights & Batteries
Dual Power: 1 Maxbright White LED for spotting at distance, and 3 Ultrabright Red LEDs for long burntime and night vision Large push-button switch designed to be compatible with gloves Asymmetrical single arm bracket creates a center of gravity for reliable pivot Easy-to-open battery door with a positive snap closure Red and white 5mm LEDs Power: 45 Lumens Lamp: 1 Maxbright White LED 3 Ultrabright Red LEDs Burn Time: 200 Hours Batteries: 3 AAA Alkaline (included) Weight: 83g with batteries.
Part No: hyb3-bk
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Shorepower Chargers
Remote “push to test” status indicators for up to three batteries with easy-to-read LED indicators. Universal mount display can be mounted in either flush or surface mount configuration. Remote “push to test” status indicators for up to three batteries with easy-to-read LED indicators.
Part No: 51060
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-12
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-14
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-16
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-18
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-20
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-24
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-30
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-04
|
|
|
|
|
Home -> Engine Systems -> Control Systems->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-06
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->KE-4 Electronic Remote Control System
This longlasting control has been extensively tested, and performs well in excess of a typical mechanical system. Features fail-safe operation, self-diagnosis system, control head with built-in station select switch, neutral warm up provision, optional mechanical backup, overload protection. Use one control unit and one actuator for single engine boats with up to four pilot stations. Use two control units for two engine boats with up to four stations. Call 1-800-BOATING for more information.
Part No: NM0616-08
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers
The remote control SNAPPER Boat Latch adds a new dimension to boat trailer catch and release activity never before experienced. One person can catch or release their boat from their boat trailer without having to get out of the boat, stand in the water, or stand on a trailer support. Boat trailer catch and release has become many times safer with the use of the SNAPPER Boat Latch. No need to wade into water. Remote controlled from as far away as 50 feet or more. Anti-theft padlock feature.
Part No: 16-SNAPPER-4
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Inverters
Remote display unit for Xantrex Pro 1000 & 1800 Fixed moun inverters.
Part No: 808-8010-00
|
|
|
|
The perfect mate to the M1500 Marine Monitor or your own repeater display, the E-Series Remote Keyboard allows full control of all E-Series functions. The keyboard has the same familiar Twist n' Click, softkeys, and cursor controls as the E80 and E120 displays. Additionally, a full 12 key alphanumeric keypad is included to make entering waypoints, routes, and names fast and easy. This rugged, waterproof keyboard includes all of the hardware to mount it inside or outside.
Part No: E55061
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories->Wireless Remotes for Windlasses
Works with all Lewmar windlasses that use a control box/solenoid. Using over one billion individual codes, the proprietary encryption scheme prevents false triggering from any other device or similar fob. Three-button version works with a single windlass. Five-button version can operate a second windlass or bow thruster. Fobs float and are waterproof to IP67 (1 meter deep).
Part No: 68000846
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Wireless Remotes for Windlasses
Works with all Lewmar windlasses that use a control box/solenoid. Using over one billion individual codes, the proprietary encryption scheme prevents false triggering from any other device or similar fob. Three-button version works with a single windlass. Five-button version can operate a second windlass or bow thruster. Fobs float and are waterproof to IP67 (1 meter deep).
Part No: 68000847
|
|
|
|
Home -> Electrical -> Chargers & Inverters
Used in conjunction with the BatteryLink ACR, the switch panel allows the ACR to be turned off, set to automatic, or manually combined. Instructions.
Part No: 8270
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
The powerful 72,000cp spot and 30,000cp flood features a sleek stainless steel body and a smooth electrical aiming mechanism that rotates through a 350° and tilts 70° so you can aim it almost anywhere. Includes a joystick remote control and 15' wiring harness. The optional Dual Station Control lets you operate the spot/flood from the flybridge or any other second station. Base: 5-1/2" x 3-1/2". Beam Strength: 72,000cp . Case Material: Stainless steel . Case Dimensions: 9.
Part No: 22040A
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Adjustable Keel Roller Brackets
Hot dip galvanized brackets hold spool or tapered keel rollers. 17/32" x 5" slots allow for vertical adjustment 5" brackets have slots 3" on center. 8" brackets have slots 6" on center. 10" brackets have slots 8" on center. 12" brackets have slots 10" on center.
Part No: 32004G
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Removable Bi-Color Utility Lights
These 12" plug-in bi-color pole lights feature a deck illuminating built-in utility light that's controlled by a switch located on the light's top cover. Model 8582520 and 8582504 are USCG certified for use on power or sail boats under 12m (39. 4') in length. Model 8582512 is certified for powerboats only under 20m (65. Bases sold separately (next page). Model 8582512 uses a 3 contact, 5° angle base. Model 8582520 uses a 3 contact, 0° base. Model 8582504 uses a 2 contact, 0° base.
Part No: 1612DP2BLK
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Removable Bi-Color Utility Lights
These 12" plug-in bi-color pole lights feature a deck illuminating built-in utility light that's controlled by a switch located on the light's top cover. Model 8582520 and 8582504 are USCG certified for use on power or sail boats under 12m (39. 4') in length. Model 8582512 is certified for powerboats only under 20m (65. Bases sold separately (next page). Model 8582512 uses a 3 contact, 5° angle base. Model 8582520 uses a 3 contact, 0° base. Model 8582504 uses a 2 contact, 0° base.
Part No: 1421DP2CHR
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Removable Bi-Color Utility Lights
These 12" plug-in bi-color pole lights feature a deck illuminating built-in utility light that's controlled by a switch located on the light's top cover. Model 8582520 and 8582504 are USCG certified for use on power or sail boats under 12m (39. 4') in length. Model 8582512 is certified for powerboats only under 20m (65. Bases sold separately (next page). Model 8582512 uses a 3 contact, 5° angle base. Model 8582520 uses a 3 contact, 0° base. Model 8582504 uses a 2 contact, 0° base.
Part No: 1212DP2CHR
|
|
|
|
Home -> Fishing -> Fishing Accessories
Telescoping Octagonal Handle Boat Net Bow: 21" x 25". Handle: 38"–70".
Part No: RF-OCT-37-6-2PC
|
|
|
