Top Sellers
Deluxe Horseshoe Buoy, 40lb. Buoyancy, White, 24" x 24" x 3' from CAL-JUNE
Each Type IV USCG-approved buoy is made of closed-cell foam and covered with a tough, vinyl-coated fabric. The Deluxe Buoy includes a built-in drogue. USCG Type: IV. Configuration: Horseshoe buoy. Material: Closed-cell foam and covered with a tough, vinyl-coated fabric.
|
Pick-up Buoy from CAL-JUNE
Durable polypropylene rope through a solid foam float has ample bright at one end for boathook pickup. Galvanized thimble at opposite end accomodates pennant from mooring buoy. Red band makes it more visible Made in U. S. A.
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
Handheld Orange Smoke Flare, Single Pack from ORION
Produces orange smoke thats visible for up to five miles during the day. USCG approved for daytime use only. Signal Type: Orange smoke hand flare . Burn Time: One minute . Deployment Method: Match strike igniter . Type Approval: USCG daytime .
|
|
|
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
|
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
|
Sully Stick Winter Mooring Buoy from TAYLOR
Extend the life of your mooring with our ice-proof stickUse this long tapered buoy in place of a standard round buoy during winter months to help prevent ice entrapment and extend the life of the mooring by protecting it from the damaging effects of freezing temperatures. Molded in eyelet at the top allows for easy retrieval and the base eyelet is reinforced with galvanized metal brushing to attach a rope and connect to the anchor chain. 80"L x 6" Dia.
|
12 Volt White Dual Trumpet Mini Air Horn from AFI
White epoxy powder-coated finish over solid brass. Noncorrosive Lexan® diaphragm. 12vDC. . Draws 20 amps max. Includes compressor, air tubing, fittings, and hardware. 5" W x 3-3/4"H x 9-1/2" L.
|
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
Inflatable Life Vest, Orange from Ultra 4000 Manual/Automatic Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .
|
LetterU - White, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
20" x 20" Shade/Screen, Fits Lewmar Hatches, White from SKYSHADE
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.
|
|
White from CAL-JUNE, Orange from CAL-JUNE, Ring Buoy
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Waterproof, Low-Profile Thermoguarded Trailer Lights
Top-quality, multi-functional trailer lights feature waterproof capsules to protect bulbs from corrosion and thermoshock during boat launching and loading. Tough polycarbonate lens and rugged duramold housing. The kit includes a right and left tail light, license bracket, wire harness, hardware and instructions. The replacement lens kit includes two stop/turn/tail lenses, two side lenses and eight replacement screws. For any trailer, including those with overallwidths of 80" or more.
Part No: 01-5248-71
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Economy Over 80"W Trailer Lights
Value-priced, durable over 80" wide lighting system includes two tail lights, trailer harness, license bracket, installation kit and instructions. Left tail lamp includes license plate illuminator. High impact acrylic lens and rugged duramold housing. Not recommended for submersible applications. .
Part No: 01-5244-71
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Submersible Over 80"W Trailer Lights
Waterproof lighting system is designed for over 80" wide trailers. Lights feature gasketed lenses that provide a "bell-jar" pocket inside the light to help keep water away from bulbs and contacts. High-impact acrylic lens and rugged duramold housing. The left light includes a license plate illuminator. Lighting kit includes two tail lights, trailer harness, licenses bracket, installation kit and instructions.
Part No: 01-5193-71
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Economy Trailer Lights
Affordable and durable lights re designed for trailers under 80" wide. Kits include two tail lights, trailer harness, license bracket, installation kit and are available with or without marker lamps. Left handtail lamp includes license plate illuminator. High-impact acrylic lens and rugged duramold housing. Not recommended for submersible applications.
Part No: 01-5230-81
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Submersible Under 80"W Trailer Lights
Gasketed lenses help keep water away from the bulbs and contacts of these lights, which are designed for under 80" wide trailers. The left light includes a license plate illuminator. Kits are available with and without sidemarker lamps. High-impact acrylic lens and rugged duramold housing. Lighting kits include two tail lights, trailer harness, license bracket, installation kit and instructions.
Part No: 01-5366-71
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Rigid Vinyl Replacement Rub Rail
Rigid vinyl rub rail tightly forms to the boats’ contours and has exceptional lasting qualities in the most adverse conditions. Color and gloss levels matched to gel coats blending rub rail with hull and deck . Requires heat for radius forming . Cuts and drills like wood . Flexible insert covers fasteners and provides a soft, cushioning effect against normal bumps from pilings and docks . Ideal for boats up to 25 feet . Drilled only on 6” centers . Color: WHC. Height: 1-1/2".
Part No: V21-9501WHC20D
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Rigid Vinyl Replacement Rub Rail
Rigid vinyl rub rail tightly forms to the boats’ contours and has exceptional lasting qualities in the most adverse conditions. Color and gloss levels matched to gel coats blending rub rail with hull and deck. Requires heat for radius forming. Cuts and drills like wood. Flexible insert covers fasteners and provides a soft, cushioning effect against normal bumps from pilings and docks. Ideal for boats up to 25 feet. Drilled and countersunk on 8” centers. Color: WHA. Height: 1-7/8".
Part No: V21-9602WHA20D
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Rigid Vinyl Replacement Rub Rail
Rigid vinyl rub rail tightly forms to the boats’ contours and has exceptional lasting qualities in the most adverse conditions. Color and gloss levels matched to gel coats blending rub rail with hull and deck . Requires heat for radius forming . Cuts and drills like wood . Rigid vinyl rub rail with stainless steel insert provides the ultimate in durability and elegance . Ideal for 20 to 40 foot boats . Drilled and countersunk on 8” centers. Width: 3/4". Height: 1-9/16".
Part No: V21-9613WHC20D
|
|
|
|
Home -> Cordage -> Rigging Products -> Rigging, Sewing, Splicing
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
Part No: 7850
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
Part No: 0928DP0CHR
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
Part No: 0930DP0CHR
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Locked by deadbolt from inside, or key from outside. Made of chrome-plated zinc. Case size: 3 7/8'' x 2''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 3/4'' to 1 1/2''.
Part No: 0918DP0CHR
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Locked by deadbolt from inside, or key from outside. Made of chrome-plated zinc. Case size: 3 7/8'' x 2''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 3/4'' to 1 1/2''.
Part No: 0919DP0CHR
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Rincon Sunglasses
Medium frame with big, broad temples and distinctive wrap style for all-day comfort. Hinge: Integral. Frame Fit: S. Rx-able. Frames: Shiny Black, Shiny Tortoise. Lenses: 400 Glass - Blue Mirror, Green Mirror . Costa Del Mar Lenses 580TM Lenses Yellow light is the enemy. It's hard for the eye to process and changes how you see the world. Not with a pair of 580s on. These patent-packed lenses raise the red, blue and green areas to amazing levels, while eliminating much of the yellow light.
Part No: RN 11 BMGLP
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Rincon Sunglasses
Medium frame with big, broad temples and distinctive wrap style for all-day comfort. Hinge: Integral. Frame Fit: S. Rx-able. Frames: Shiny Black, Shiny Tortoise. Lenses: 400 Glass - Blue Mirror, Green Mirror . Costa Del Mar Lenses 580TM Lenses Yellow light is the enemy. It's hard for the eye to process and changes how you see the world. Not with a pair of 580s on. These patent-packed lenses raise the red, blue and green areas to amazing levels, while eliminating much of the yellow light.
Part No: RN 10 GMGLP
|
|
|
|
Home -> Safety -> Man Overboard Gear->Roughneck Ring Buoy Racks
Heavy-duty, welded stainless steel rack cradles a ring buoy at three points. Pre-drilled holes for bulkhead mounting, or rail mounting with U-bolts .
Part No: 1123-20
|
|
|
|
Home -> Safety -> Man Overboard Gear->Roughneck Ring Buoy Racks
Heavy-duty, welded stainless steel rack cradles a ring buoy at three points. Pre-drilled holes for bulkhead mounting, or rail mounting with U-bolts .
Part No: 1123-24
|
|
|
|
Home -> Safety -> Man Overboard Gear->Roughneck Ring Buoy Racks
Heavy-duty, welded stainless steel rack cradles a ring buoy at three points. Pre-drilled holes for bulkhead mounting, or rail mounting with U-bolts .
Part No: 1123-30
|
|
|
|
Home -> Safety -> Man Overboard Gear->Type IV Ring Buoys
A life ring that resists weather & temperature extremes—it’s easy to throw, too! Vinyl-coated nylon skin with urethane foam core. Grab line passes through webbing straps around buoy (except Model 10663508, with ropes molded into core). USCG-approved Type IV throwable device Configuration: Ring buoy Buoyancy: 19lb.
Part No: G-19
|
|
|
|
Home -> Safety -> Man Overboard Gear->Type IV Ring Buoys
A life ring that resists weather & temperature extremes—it’s easy to throw, too! Vinyl-coated nylon skin with urethane foam core. Grab line passes through webbing straps around buoy (except Model 10663508, with ropes molded into core). USCG-approved Type IV throwable device Configuration: Ring buoy Buoyancy: 19lb.
Part No: GW20
|
|
|
|
Home -> Safety -> Man Overboard Gear->Type IV Ring Buoys
A life ring that resists weather & temperature extremes—it’s easy to throw, too! Vinyl-coated nylon skin with urethane foam core. Grab line passes through webbing straps around buoy (except Model 10663508, with ropes molded into core). USCG-approved Type IV throwable device Configuration: Ring buoy Buoyancy: 19lb.
Part No: GO-24
|
|
|
|
Home -> Safety -> Man Overboard Gear->Type IV Ring Buoys
A life ring that resists weather & temperature extremes—it’s easy to throw, too! Vinyl-coated nylon skin with urethane foam core. Grab line passes through webbing straps around buoy (except Model 10663508, with ropes molded into core). USCG-approved Type IV throwable device Configuration: Ring buoy Buoyancy: 19lb.
Part No: GO-24T
|
|
|
|
Home -> Safety -> Man Overboard Gear->Type IV Ring Buoys
A life ring that resists weather & temperature extremes—it’s easy to throw, too! Vinyl-coated nylon skin with urethane foam core. Grab line passes through webbing straps around buoy (except Model 10663508, with ropes molded into core). USCG-approved Type IV throwable device Configuration: Ring buoy Buoyancy: 19lb.
Part No: GW-24
|
|
|
|
Home -> Safety -> Man Overboard Gear->Type IV Ring Buoys
A life ring that resists weather & temperature extremes—it’s easy to throw, too! Vinyl-coated nylon skin with urethane foam core. Grab line passes through webbing straps around buoy (except Model 10663508, with ropes molded into core). USCG-approved Type IV throwable device Configuration: Ring buoy Buoyancy: 19lb.
Part No: GO-30
|
|
|
|
Home -> Safety -> Man Overboard Gear->Type IV Ring Buoys
A life ring that resists weather & temperature extremes—it’s easy to throw, too! Vinyl-coated nylon skin with urethane foam core. Grab line passes through webbing straps around buoy (except Model 10663508, with ropes molded into core). USCG-approved Type IV throwable device Configuration: Ring buoy Buoyancy: 19lb.
Part No: GW-30
|
|
|
|
Home -> Safety -> Man Overboard Gear->Type IV Ring Buoys
A life ring that resists weather & temperature extremes—it’s easy to throw, too! Vinyl-coated nylon skin with urethane foam core. Grab line passes through webbing straps around buoy (except Model 10663508, with ropes molded into core). USCG-approved Type IV throwable device Configuration: Ring buoy Buoyancy: 19lb.
Part No: GW-X-30
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems->Pump Service Kits
These kits simple mechanical characteristics ensure trouble-free running and long life.
Part No: 35788-0000
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Composite Props->ProPulse Propeller Spare Parts
Hubs for additional engine types and applications.
Part No: 6401-5
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Composite Props->ProPulse Propeller Spare Parts
Hubs for additional engine types and applications.
Part No: 8401-5
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Composite Props->ProPulse Propeller Spare Parts
Hubs for additional engine types and applications.
Part No: 9401-5
|
|
|