Top Sellers
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
|
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
|
Required Waste/Oil Garbage Placards from WEST MARINE
Get ready for a Coast Guard inspection with required plaquesCoast Guard regulations require these plaques to be displayed on any boat 26' feet and over with an enclosed engine compartment. Adhesive backing. Easy to apply. White text on black background.
|
Men's Chronograph Watch from NAUTICA
Men's chronograph watch Brushed stainless steel case with black dial.
|
Gas Fill & Tank Vent - Black from PERKO
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
Steering Wheel, Black w/ Burlwood Inserts from SCHMITT MARINE STEER
Classic Italian styling at an affordable price. Our Folletto wheels feature modern styling that will enhance the look of any power boat. These wheels feature aluminum spoke with polyurethane grips. The 3/4" tapered hub fits most steering systems. Black aluminum spoke. Black polyurethane grip. Burlwood inserts. 13-3/4" Diameter.
|
Vent Filter with Bracket and Fittings, 5/8" (16mm) from SEALAND
Stop odors from escaping through your holding tank vent. Your neighbors on the dock will appreciate it and you will too! This in-line filter contains odor-removing materials. It lasts for an entire season and is easily replaced for a fresh start.
|
Rubrail Insert - for Style #6, Model 341100 from TACO PRODUCTS
Rubber inserts add cushioning to your aluminum rubrails. . These fit styles #5, #6 and #7. Rub rails and inserts sold separately. .
|
Insert - for Taco #V21-9517, #V21-9501, #V21-9602, Per Foot from TACO PRODUCTS
Rubber inserts add cushioning to your aluminum rubrails. . These fit styles #5, #6 and #7. Rub rails and inserts sold separately. .
|
Vent, Cabin/Hatch from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru deck installations. 2 1/4”H x 6 3/4”Diameter.
|
Vent-O-Mate Plastic Cover Only, White, C6R from BECKSON MARINE INC
Keep rain out and let air circulate through the cabin with the Vent-O-Mate. Wind moving over the top of the vent creates a vacuum which removes air from your boat at the rate of 350cu. ft. /hr. in a 6mph breeze.
|
Drive/Bell Housing - Fits Mercruiser from MERCURY MARINE
A special coated gasket and the correct "O" rings to properly seal drives to the bell housing.
|
SPST Switch, ON/OFF Positions, No Pilot Light, 2 Screw Terminals from COLE HERSEE
These rocker switches come in several different configurations for panel mounting. Available in illuminated and non-illuminated models, they feature non-glare black matte plastic housings, bezel and actuator, brass screw or blade terminals, and gasket-sealed housings. Snap-in mounting in panels from 0. 093" (2. 36mm) to 0. 187" (4.
|
|
Black Housing, Black Louvered Vent from ATTWOOD, 5" from BOMAR
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Series 32 LED Navigation Lights
LED Navigation Lights for big boats Use on power or sail vessels up to 65'7" (20m). Two nautical mile visibility. Patented prism lens technology provides the highest quality LED illumination in the industry. Energy-efficient LED technology significantly reduces power draw compared to incandescent lights. ABYC, USCG, IMO, CE and RINA certified. Case Material: Polycarbonate . Mounting Hardware: Sold separately . Volts: Operates on 12V or 24V with no modification needed . Draw: 0.
Part No: 32502-7
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Series 41 Navigation Lights
Case Material: Glass-reinforced polycarbonate Mounting Hardware: Two #6 RH screws (sold separately) Volts: 12V Draw: 2A Wiring Provisions: 5" Wire pigtail Replacement Bulb: Model 2412278 Warranty: One year.
Part No: 41500-7
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Series 32 LED Navigation Lights
LED Navigation Lights for big boats Use on power or sail vessels up to 65'7" (20m). Two nautical mile visibility. Patented prism lens technology provides the highest quality LED illumination in the industry. Energy-efficient LED technology significantly reduces power draw compared to incandescent lights. ABYC, USCG, IMO, CE and RINA certified. Case Material: Polycarbonate . Mounting Hardware: Sold separately . Volts: Operates on 12V or 24V with no modification needed . Draw: 0.
Part No: 32606-7
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Series 32 LED Navigation Lights
LED Navigation Lights for big boats Use on power or sail vessels up to 65'7" (20m). Two nautical mile visibility. Patented prism lens technology provides the highest quality LED illumination in the industry. Energy-efficient LED technology significantly reduces power draw compared to incandescent lights. ABYC, USCG, IMO, CE and RINA certified. Case Material: Polycarbonate . Mounting Hardware: Sold separately . Volts: Operates on 12V or 24V with no modification needed . Draw: 0.
Part No: 32706-7
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 71024
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 31722
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fenders->Hull Gard® Inflatable Vinyl Fenders
Hull Gard Fenders stay put and won't roll out of position! The finest utility fender on the market, and a good choice for light duty in protected waters, Hull Gard features a unique oval design which prevents the fender from rolling out of position. The Hull Gard combines unsurpassed softness and superior strength to provide the maximum protection available from a utility fender.
Part No: 71028
|
|
|
|
Home -> Fishing -> Fishing Accessories
Black Liner/Cap for Rod Holder.
Part No: 6247PBLUE
|
|
|
|
Home -> Ventilation -> Vents->Louvered Vents
Made from ABS plastic. Will not rust, discolor or streak. Pre-drilled with six holes to accommodate #8 screws. 3/4"H x 3-7/16"W x 17-7/8"L. Type: Louvered . Material: ABS Plastic . Cutout Size: 2-1/4"W x 16"L .
Part No: 1495A1
|
|
|
|
Home -> Watersports -> Wakeboards, Kneeboards, Skis & Towables -> Kneeboards
A low-profile, twin-tip shape and retractable fins give this board the speed and performance intermediate riders and adventurous beginners crave. Power control kneepad and 3" padded strap hold you in tight while remaining comfortable. Aquatic Hook to make learning easy. Beginner/Intermediate . Roto-molded construction with durable plastic base, foam core . Length: 55" Width: 21" . Low-profile, twin-tip . Two retractable Fins. Strap: Adjustable, 3" padded .
Part No: 2091210
|
|
|
|
Home -> Cordage -> Rigging Products -> Wind Instruments
Attaches quickly to round mast or boom extrusion with a short loop of shock cord and provides easily read apparent wind direction.
Part No: 1295
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Black Molded Hatches
Acrylic lens floated inside an insulated pocket improves the longevity, waterproofness, and durability of this low-profile hatch with locking 1/2" vent position. Has a strong UV-Stabilized black resin frame with rugged arms and tie-down dogs Mage in U. S. A.
Part No: G910---1100
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Black Molded Hatches
Acrylic lens floated inside an insulated pocket improves the longevity, waterproofness, and durability of this low-profile hatch with locking 1/2" vent position. Has a strong UV-Stabilized black resin frame with rugged arms and tie-down dogs Mage in U. S. A.
Part No: G927---1100
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Momentary Contact Switches
Compact 10A pushbutton switches for horn, starter, and other momentary applications.
Part No: 9187-BP
|
|
|
|
Our 400 lb. Monofilament is made of only the finest mono.
Part No: 88671
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Wing Nuts
The wing nuts manufactured from either 316 stainless steel or black nylon for ease of tightening up the blade pivot bolt.
Part No: 18.26P
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Wing Nuts
The wing nuts manufactured from either 316 stainless steel or black nylon for ease of tightening up the blade pivot bolt.
Part No: 18.28P
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Lifting Handles
2-1/2" dia. , round glass reinforced resin bodies fit into a 2" hole.
Part No: F42-2500BKSS-1
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Inflatable Boat Oar Lock Assemblies
Inflatable Boat Oar Lock Assemblies.
Part No: SSL250300
|
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Inflatable Boat Oar Lock Assemblies
Inflatable Boat Oar Lock Assemblies.
Part No: SSL250100
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Chain And Rode Pipes->Round Plastic Deck Pipes
Accepts line up to 7/8". Not for use with chain. UV-stabilized, high-impact plastic. Hinged, snap-down cover. Material: UV-stabilized, high-impact plastic . Flange: 3-3/4"Dia. . I. D. : 2. 5"Dia.
Part No: 1057DP0BLK
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Plastic Trailer Fenders
No more rust! Upgrade your trailer with these high-impact polyethylene fenders designed for standard and low-profile tires. High-gloss finish is molded in and not added on later. UV-protected to resist yellowing and fading. 7 3/4"W x 5"H x 21"L and fit 8-12" wheels.
Part No: 17033
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Pole storage clips. Soft black rubber, fits 3/4" diameter tubing, use #8 PH screws.
Part No: 0477DP0BLK
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 31022B
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Outriggers->Double Rigging Kits - Standard and Premium
All the equipment needed to rig a pair of outriggers up to 22'. Includes: 4 release clips, shock cord with chrome-plated snaps and glass eye, swivels, crimps, pad eyes. screws and 100' of UV-protected Dacron line, and hardware to rig 2 lines off each outrigger. Comes with a durable blue marine mesh bag for storage Premium kits also include stainless-steel snaps, pulley and balsa wood floats, 4 quality release clips, and hardware to rig 2 lines off each outrigger.
Part No: RK-0002PB
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Outriggers->Rigging Kits - Standard and Premium
All the equipment needed to rig a pair of outriggers up to 22'. Includes: 2 release clips, shock cord with chrome-plated snaps and glass eye, swivels, crimps, pad eyes. screws and 100' of UV-protected dacron line. Comes with a durable blue marine mesh bag for storage.
Part No: RK-0001PB
|
|
|
|
Home -> Fishing -> Fishing Accessories->Premium Rod Hangers
Available in anodized aluminum, silver, gold, black and polished stainless steel.
Part No: 99M 88546
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Rubber Button Covers
Protect switch mechanism from water and dirt with snap-on covers.
Part No: 407-03-BP
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support
For replacement of ribbed wobble rollers. Kit includes four 5" x 3" black ribbed rollers, four Delrin bushings, four 1-1/8" washers, four 3/4" washers and four retainer rings.
Part No: 29210
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Roller & Bracket Assemblies
Pre-assembled for easy installation . Strong, hot-dipped galvanized brackets hold shock-absorbing, V-style tapered rollers to give proper keel support . Black rubber rollers available in 5 widths. Long-lasting TPR rollers available in 3 widths. 17/32" x 5" slots for vertical adjustment.
Part No: 10405G
|
|
|
