West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.

50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .

Ocean Mate I™ SOLAS Vest, Standard from STEARNS
Ocean Mate™ I Type I flotation device complies with SOLAS 83 requirements. Minimum of 18 lb. buoyancy (child). Reversible offshore PFD designed for quick donning . 3M Scotchlite Reflective Material SOLAS-grade 6755 on panels . Stackable for easy storage . Heavy-duty stainless steel hardware with an attached SOLAS whistle . Light storage pocket .

Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).

Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.

SW Inverter/Charger Remote Panel with 50ft. Cable from XANTREX
Designed for use with SW and PS inverter/chargers, the SWRC is a full-function remote control with backlit LCD display. The remote control comes with a standard 25’ (7. 5 m) cable or a 50’ optional (15 m) cable.

Tachometer/System Check (4"), Johnson/Evinrude outboard, 7000RPM from FARIA INSTRUMENTS
For more than 50 years, Faria has lived up to its reputation as a producer of high-quality, long-lasting instruments. The immensely readable and durable instruments in the Euro series feature bold, bright white numerals against a non-glare black background. Sculpted white pointers and low-profile black aluminum bezels make for even greater readability. Features a perimeter-lit black dial and flat glass lens.

Raw Water Strainer, 1" Port Sizes from SHURFLO
Assembly features durable nylon upper housing, clear polymide twist-off bowl and pop-out, 50-mesh stainless steel screen.

3.8mm Spyderline, 50' Spool, 1900lb. Breaking Strength, Lime from NEW ENGLAND ROPES
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. It is flexible, yet firm enough to be led through small leads, micro blocks and purchase systems and is also a great choice as sail ties for the performance Opti sailor. Best Use: Performance dinghy cascade systems and control lines . Core Fiber/Construction: Dyneema SK-75 braid .

Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .

Impeller Kit 09959K from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.

Bootstripe Tape, 2'' Black from SEAFIT
Great for use along the waterline or as an accent along the gunnelsThese self-adhesive vinyl accent stripes liven up the look of any boat. Vibrant, long lasting colors add just the right touch of pizzazz to your boat's exterior, changing it from drab and ordinary to bright, clean and beautiful. Sold in 50' rolls.

10077K REPL IMPELLER KIT from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.

Bootstripe Tape, 1'' Blue from SEAFIT
Great for use along the waterline or as an accent along the gunnelsThese self-adhesive vinyl accent stripes liven up the look of any boat. Vibrant, long lasting colors add just the right touch of pizzazz to your boat's exterior, changing it from drab and ordinary to bright, clean and beautiful. Sold in 50' rolls.

Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .