SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.

Hour Tach Meter 1 or 2 Cylinder from DYER SPECIALTY
Hour Tach Meter Surface Mounted Inductive Meters provide what today's power-sports user need and expect from hour meters and hour tach meters. Knowing what to service and when, is the key to a successful preventative maintenance program for your motorcycle, ATV, PWC, Boat and Generator. Installation is easy with simple patented one wire hook-up. Encapsulated exopy case is water resistant. Hour Meter Track the Service Life of Your Vehicle - oil changes, valve, adjustments, spark plugs, etc. .

SmartPilot Corepacks from RAYMARINE INC.
The central nervous system of every SmartPilot system, Raymarine corepacks are comprised of a course computer,patented fluxgate electronic compass and rudder reference unit. In order to select the right SmartPilot corepack for your vessel you must first determine which autopilot drive unit is right for your steering system. Each corepack contains a SmartPilot course computer in either a standard configuration or a “G” version. T400 Corepacks are now called S3 Corepacks. Fluxgate compass - 3.

ARS-5 Advanced Regulator from BALMAR
Simply select one of five preset program choices based on battery type, and the belt size setting that matches your alternator’s drive belt width and alternator output rating. Battery settings include standard and deep-cycle flooded, gel, AGM, and Optima programs. When used with MC-TS-A and MC-TS-B alternator and battery temperature sensors, the ARS-5 ensures even greater charging performance, as well as critical protection for your alternator and batteries. Controls a single alternator only.

Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.

5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.

5"-6" Bonnet Set from WMH TOOL GROUP
For final buff out, use the wool polishing bonnet included in this Seven Piece Bonnet Set which includes four applicators, two terry cloth, one wool and one microfiber polishing bonnet.

1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.

1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.

Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".

2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.

Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.

Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".

1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.

Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .