Welcome! Please Sign-In
Top Sellers
Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
Drain Fitting, 1-1/4" Straight, 3/4" Hose, Plastic. from FORESPAR
Drain Fitting, 1-1/4" Straight, 3/4" Hose, Plastic. from FORESPAR
1-1/4" Straight, 3/4" Hose, Plastic.
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
PE-1 Lexan Mast Pad Eye from FORESPAR
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
1-7/8" Polished Brass Flush Ring Pull from ABI
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
Acetal Thru-Transom Scupper from WEST MARINE
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
2" ID, 90° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
2" ID, 90° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
5" ID, 45° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
5" ID, 45° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Flipper Pump from WHALE PUMPS
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
Gas Deck Fill, Locking from PERKO
Gas Deck Fill, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
12V Macerator Pump, 14A Draw from SHURFLO
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
Gas Deck Fill Replacement Cap, Locking from PERKO
Gas Deck Fill Replacement Cap, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.

1, 500lb, Rivet Eye, 1-1, Series 250 Exhaust Hose, from RONSTAN, 7oz, 0, 1, SWL

This site contains about 37,785 documents.
View by:
Title  |  Category  |  Manufacturer  |  Part No  |  Price
Page:   1   100   200   300   400   500   670   680   690   700   710   720   730   740   750   759   760   761   762   763   764   765   766   767   768   769   770   771   772   773   774   775   776   777   778   779   780   781   782   783   784   785   786   787   788   790   800   810   820   830   840   850   860   870   900   1,000   1,100   1,200   1,260 
Series 250 Exhaust Hose, 1-1/4"ID, 1-19/32"OD, 420psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1143
Series 250 Exhaust Hose, 1-1/8"ID, 1-7/16"OD, 465psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1183
Series 250 Exhaust Hose, 1-3/4"ID, 2-1/8"OD, 300psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1343
Series 250 Exhaust Hose, 1-3/8"ID, 1-23/32"OD, 370psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1383
Series 250 Exhaust Hose, 1-5/8"ID, 2"OD, 320psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1583
Series 250 Exhaust Hose, 1-7/8"ID, 2-19/64"O, 205psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1783
Series 250 Exhaust Hose, 1"ID, 1-5/16"OD, 500psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1003
Series 250 Exhaust Hose, 1/2"ID, 27/32"OD, 870psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-0123
Series 250 Exhaust Hose, 2-1/2"ID, 2-7/8"OD, 220psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-2123
Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-2383
Series 250 Exhaust Hose, 2-7/8"ID, 3-5/16"OD, 190psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-2783
Series 250 Exhaust Hose, 2"ID, 2-13/32"OD, 260psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-2003
Series 250 Exhaust Hose, 3-1/2"ID, 4"OD, 160psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-3123
Series 250 Exhaust Hose, 3-1/8"ID, 3-5/8"OD, 175psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-3183
Series 250 Exhaust Hose, 3"ID, 3-7/16"OD, 190psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-3003
Series 250 Exhaust Hose, 3/4"ID, 1-1/16"OD, 630psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-0343
Series 250 Exhaust Hose, 4"ID, 4-5/8"OD, 130psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-4003
Series 250 Exhaust Hose, 5/8"ID, 61/64"OD, 725psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-0583
Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-0783
Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1000
Series 29 Utility Block, Cheek with Curved Base, 660lb. SWL, 2.1oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF285
Series 29 Utility Block, Double, 990lb. SWL, 1.4oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF81
Series 29 Utility Block, Double/Becket, 990lb. SWL, 1.8oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF83
Series 29 Utility Block, Fiddle, Rivet Eye, 660lb. SWL, 1.8oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF186
Series 29 Utility Block, Fiddle, Rivet Eye, V-Jam, 660lb. SWL, 2.1oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF187
Series 29 Utility Block, Single Rivet Eye, 660lb. SWL, 0.7oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF185
Series 29 Utility Block, Single, 660lb. SWL, 0.7oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF280
Series 29 Utility Block, Single/Becket & Pin, V-Jam, 500lb. SWL, 1.1oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF341
Series 29 Utility Block, Single/Becket, 660lb. SWL, 0.88oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF681
Series 29 Utility Block, Single/Becket, Rivet Eye, 660lb. SWL, 1.2oz. from RONSTAN Home -> Sailboat -> Blocks->Series 29 Utility Blocks
Stainless-steel cheeks and Acetal sheaves for light applications like dinghy vangs or outhauls or cunninghams and spinnaker controls on larger boats. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 1-1/8" (except RF341, 1"). Line Diameter: 5/16" max. (except RF341, 3/16" max. ). Cheek Material/Finish: Polished 316 Stainless.
Part No: RF188
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...		    Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...		    Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11