Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.

Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .

Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .

Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .

57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.

Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.

Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.

Impeller Kit -6, 8, 9.9,15HP 4 Stroke from MERCURY MARINE
Type A: Fits Merc/Mar 4hp (1-cyl), Model 75 (7. 5hp) and Model 110/9. 8hp when the water impeller ID measures 0. 456" Type B: Fits all Mercruiser Alpha One Generation II drives with serial number OD 469859 and above Type C: Fits Merc/Mar 6/8/9. 9hp 2-cycle outboards (USA OA197112 & above, BEL 9461526 & above), 15hp 2-cycle and 9.

1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Teak Bulkhead Molding - 2 1/4" Radius, Inside Corner, 5/8"H x 71 3/16"W with 3/4" Gap from SEATEAK
Assorted Teak Finish Trim Moldings.

800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.

5/8" Clevis Pin dia., 1-3/16" inside dia., 4-pack from WEST MARINE
Stainless-Steel Cotter Rings.

Acrylic Canvas Drink Holder, 5-1/8"W x 5-1/8"H x 3-9/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.

Impeller Kit - Neoprene (K) 2-1/4x2 from JABSCO
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.