Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Water Circulating Pump - #18-3599 - Volvo #3851982-3, 3853850; Mercruiser #811841, 850399, 850399-1 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
|
Series 60 Ratchet Block, Head Post Locking Kit from RONSTAN
Great for dinghy mainsheets on boats such as the Laser, 470 and 49er. Spinnaker sheets on dinghies, especially modern asymmetric classes, sportboat mainsheet systems, vang, traveller and control lines on larger boats. Pivoting lead blocks are great for sportboats and small keelboat spinnaker sheets and other control line applications on larger boats. One of the switches can be removed if desired. Ball Bearings: Carbon Black Acetal, Torlon® ratchet pawl . Sheave Size: 2-3/8" (60mm) .
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
All-Purpose Block, Single with Becket, Loop Head, 880lb. SWL, 2.2oz. from RONSTAN
Much stronger than other same-size blocks and much more compact than other blocks handling the same loads. “Smart” features include a unique captive lock universal head fitting and an adjustable cam arm. The ball bearing blocks feature Ronstan’s two-stage bearing system, which has exceptional low-friction performance and very high maximum working loads. For dinghies and keelboats to 26'. Bearings: Two-stage acetal ball bearing system or plain bearing. Sheave Size: 1-9/16" (40mm). ).
|
Corrosion Block, 12oz. Aerosol from LEAR CHEMICAL
Stops corrosion on all metalsThis anti-corrosion lubricant/penetrant stops or prevents corrosion on all metals. Its hydrophobic chemistry acts like an "off switch" to prevent dissimilar metal corrosion. Leaves a non-toxic, non-greasy, clean, clear protective film that blocks corrosion in a wide variety of applications, including marine electronics, batteries, circuit panels, standing rigging, fishing gear and inboard or outboard motors. 12oz. aerosol or 32oz.
|
Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstans Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.
|
Ratchet Orbit Block, Cheek, Counter-Clockwise, 550lb. SWL, 2.7oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. It can be set at a 0 or 90 degree orientation, provides stress-free articulation without allowing the block to over-rotate, and is locked in place with a security clip that doesnt require tools to fit. The Dyneema link is also more compatible with carbon, Dyneema and webbing connection points than steel loop tops or shackles.
|
Corrosion Block, 32oz. with Refill Sprayer from LEAR CHEMICAL
Stops corrosion on all metalsThis anti-corrosion lubricant/penetrant stops or prevents corrosion on all metals. Its hydrophobic chemistry acts like an "off switch" to prevent dissimilar metal corrosion. Leaves a non-toxic, non-greasy, clean, clear protective film that blocks corrosion in a wide variety of applications, including marine electronics, batteries, circuit panels, standing rigging, fishing gear and inboard or outboard motors. 12oz. aerosol or 32oz.
|
|
Block from SIERRA, BLOCK COVER GASKET from SIERRA
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Tidy-Ups™ Fender Adjusters
Snap it over a lifeline or rail and adjust fender height in a jiffy. Holds fender whips securely without hard-to-untie knots. Vinyl strap with stainless hardware. For lines up to 5/8''dia.
Part No: 1016
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes -> Kayak Accessories
The pair of blade rests easily attach to a boat frame for a convenient place to rest your oars.
Part No: 425-000160
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories
Full integral floatation . 100% Glare free Polarized lenses by Polaroid . Wrap around Grilamid TR90 frame for side UV protection . Dry wipe case included . Rubber tip arms for additional comfort and hold .
Part No: 9296 SLV
|
|
|
|
Home -> Watersports -> Skindiving Gear->Blast Fin
These Fins feature US Diver's Nature's Wing patented Split Fin Technology, which provides up to 40% greater efficiency while almost eliminating muscle strain and fatigue. The split in the fin blade reduces turbulence and drag, giving you minimum resistance even when maintaining high speeds while moving through the water. The foot pocket is super-soft and comfortable to further enhance performance.
Part No: 249110
|
|
|
|
Home -> Watersports -> Skindiving Gear->Blast Fin
These Fins feature US Diver's Nature's Wing patented Split Fin Technology, which provides up to 40% greater efficiency while almost eliminating muscle strain and fatigue. The split in the fin blade reduces turbulence and drag, giving you minimum resistance even when maintaining high speeds while moving through the water. The foot pocket is super-soft and comfortable to further enhance performance.
Part No: 249105
|
|
|
|
Home -> Watersports -> Skindiving Gear->Blast Fin
These Fins feature US Diver's Nature's Wing patented Split Fin Technology, which provides up to 40% greater efficiency while almost eliminating muscle strain and fatigue. The split in the fin blade reduces turbulence and drag, giving you minimum resistance even when maintaining high speeds while moving through the water. The foot pocket is super-soft and comfortable to further enhance performance.
Part No: 249100
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes -> Kayak Accessories
Why pump by hand if you don't have to? Let the NRS Blast Inflator Pump do the work for you. Its compact size and rugged durability will last for years. This 12-volt pump is capable of inflating to 2psi for a fast and easy inflation. It also deflates making it quick and easy to get your inflatable packed back up. Inlayed rubber insulates from heat and sound while providing a more secure grip. 12 foot power cord allows you to easily inflate your boat near your vehicle.
Part No: 1726
|
|
|
|
Home -> Interior, Flags & Gifts -> Knives & Pocket Tools -> Multi-Purpose Tools
Loaded with the most requested features, Blast is ready for work. Longer blades mean easier slicing, sawing, filing and more, while Zytel handle inserts provide a comfortable, reliable grip. New designs for the handles and pliers help Blast sustain more than double the squeezing load of the original PST. Needlenose Pliers . Regular Pliers . Wire Cutters . Hard-Wire Cutters . Clip-Point Knife . Wood/Metal File . Saw . Scissors .
Part No: 830033
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Mechanical Steering
Hydraulic steering bleed fitting kit 2 fittings per kit.
Part No: HF4202
|
|
|
|
Home -> Engine Systems -> Engine Parts
Similar to Mercury 32-99387-79 Length: 50'. . 0625" ID x .
Part No: 18-8050
|
|
|
|
Home -> Engine Systems -> Engine Parts
Similar to Mercury 32-99130122, 32-892024122 Length: 50'. . 090" ID x .
Part No: 18-8048
|
|
|
|
Home -> Casual Apparel -> Shirts->Blender Tender T-Shirt
Welcome to Goin' Coastal!! For more than 20 years Goin' Coastal has been creating ESCAPES through vibrantly illustrated T-shirts, Tropical Apparel and other fun gift products that feature parrots, lizards, iguanas, and the casual lifestyle found in paradise. The unmistakable Goin' Coastal tradition of illustrated storytelling, creativity, and quality continues today. Come Escape with us. 100% Cotton Printed T-Shirt.
Part No: BAY BLUE-L
|
|
|
|
Home -> Casual Apparel -> Shirts->Blender Tender T-Shirt
Welcome to Goin' Coastal!! For more than 20 years Goin' Coastal has been creating ESCAPES through vibrantly illustrated T-shirts, Tropical Apparel and other fun gift products that feature parrots, lizards, iguanas, and the casual lifestyle found in paradise. The unmistakable Goin' Coastal tradition of illustrated storytelling, creativity, and quality continues today. Come Escape with us. 100% Cotton Printed T-Shirt.
Part No: BAY BLUE-M
|
|
|
|
Home -> Engine Systems -> Engine Parts
2 per package.
Part No: 18-2809-9
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts->Sierra-Carburetor Kits
Sierra carb kits and gaskets for engine tune ups.
Part No: 18-2504
|
|
|
|
Block cover gasket, 35-50 hp.
Part No: 18-2805-9
|
|
|
|
Home -> Engine Systems -> Engine Parts
Block cover gasket, package of 2.
Part No: 18-2807-9
|
|
|
|
Home -> Engine Systems -> Engine Parts
Block cover gasket, 45-50 hp.
Part No: 18-2810-9
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Low Amperage Distribution
**Block-Junction|**Block-Junction.
Part No: FS45640
|
|
|
|
Home -> Electrical -> Meters & Distribution
**Block-Junction|**Block-Junction.
Part No: FS40690
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Low Amperage Distribution
**Block-Junction|**Block-Junction.
Part No: FS45650
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Letters and Numbers->3" Boat Letter/Number Kits
Attractive faded and nonfaded colors that are easy to applyKits include multiple sets of 3"H, self-adhesive letters and numbers to match the graphics of many boats, including bright PWC colors. Four of each letter and number for a total of 144 pieces in the kit. Match the graphics of many boats. Four of each letter and number.
Part No: BLBLK320
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Letters and Numbers->3" Boat Letter/Number Kits
Attractive faded and nonfaded colors that are easy to applyKits include multiple sets of 3"H, self-adhesive letters and numbers to match the graphics of many boats, including bright PWC colors. Four of each letter and number for a total of 144 pieces in the kit. Match the graphics of many boats. Four of each letter and number.
Part No: BRBLK320
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Letters and Numbers->3" Boat Letter/Number Kits
Attractive faded and nonfaded colors that are easy to applyKits include multiple sets of 3"H, self-adhesive letters and numbers to match the graphics of many boats, including bright PWC colors. Four of each letter and number for a total of 144 pieces in the kit. Match the graphics of many boats. Four of each letter and number.
Part No: REBLK320
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Letters and Numbers->3" Boat Letter/Number Kits
Attractive faded and nonfaded colors that are easy to applyKits include multiple sets of 3"H, self-adhesive letters and numbers to match the graphics of many boats, including bright PWC colors. Four of each letter and number for a total of 144 pieces in the kit. Match the graphics of many boats. Four of each letter and number.
Part No: SIBLK320
|
|
|
|
Home -> Ventilation -> Bilge Blowers->PAR Marine Blowers
These blowers are constructed with tough, reinforced plastic housings and a one-piece balanced rotor for maximum corrosion resistance in marine environments. Flexmount models have both inlet and outlet ports designed for slip-on flexible-duct connections. The blower may be rotated in the mounting bracket to permit installation with the discharge port in any direction. The inlet port can be connected with duct hose to the area requiring ventilation. Tough, reinforced plastic housings.
Part No: 35115-0020
|
|
|
|
Home -> Ventilation -> Bilge Blowers->PAR Marine Blowers
These blowers are constructed with tough, reinforced plastic housings and a one-piece balanced rotor for maximum corrosion resistance in marine environments. Flexmount models have both inlet and outlet ports designed for slip-on flexible-duct connections. The blower may be rotated in the mounting bracket to permit installation with the discharge port in any direction. The inlet port can be connected with duct hose to the area requiring ventilation. Tough, reinforced plastic housings.
Part No: 34739-0010
|
|
|
|
Home -> Ventilation -> Bilge Blowers->PAR Marine Blowers
These blowers are constructed with tough, reinforced plastic housings and a one-piece balanced rotor for maximum corrosion resistance in marine environments. Flexmount models have both inlet and outlet ports designed for slip-on flexible-duct connections. The blower may be rotated in the mounting bracket to permit installation with the discharge port in any direction. The inlet port can be connected with duct hose to the area requiring ventilation. Tough, reinforced plastic housings.
Part No: 35400-0000
|
|
|
|
Home -> Ventilation -> Bilge Blowers
Slips over the inlet on all PAR 3'' blowers. Fine mesh screen keeps foreign objects from damaging the blower wheel.
Part No: 34764-0000
|
|
|
|
Home -> Ventilation -> Bilge Blowers
Enables you to connect duct hose directly to PAR 3'' blower port.
Part No: 34856-0000
|
|
|