Top Sellers
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .
|
Super Sub Pump 650 Auto, 650gph from WHALE PUMPS
With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won’t fit. Twist-lock assembly/ disassembly makes these pumps easy to clean. Following on the heels of the original award-winning design of the Super Sub 500, the new Super Sub 650 features a built-in electronic switch and increased capacity of 650gph. Port Size: 3/4" . Built-in Switch: Super Sub 500: No; Super Sub 650: Yes .
|
Whale Gulper 220 Pump, 12V DC, Draw: 2.4A from WHALE PUMPS
Use this 3. Large 3/4" inlet and outlet valves are cut at 45° angles to minimize flow restriction. Ports rotate to the position you need to facilitate hose connections and it mounts vertically or horizontally—making installation a snap! It can run dry for extended periods without burnout and boasts a large diaphragm that generates up to 13' of lift. Rubber mounting feet reduce noise. Features: Will run dry without damage and pump a mixture of air and water . Large single diaphragm .
|
Thru-Deck Mark V Manual Sanitation Pump from WHALE PUMPS
Reliable, high-capacity pumps for emptying holding tanks, bilges, gray water tanks, etc. Nitrile diaphragms ensure long service life. Offered in Surface-Mount and Universal configurations. Universal design may be surface- or thru-deck mounted—and when mounted thru-deck requires Deck Plate with Ring Kit (Model 182438) to complete installation. 16gpm capacity. Use 1. 5" hose. Type: Manual Diaphragm, bulkhead or thru-deck models . GPM: 14. 75 . Macerates: No .
|
Whale Gusher 30, Double Action Twin Diaphragm Pump from WHALE PUMPS
Gusher 30 Pump The Gusher 30 is a double-action pump with twin diaphragms so it will still function if one side becomes clogged. Constructed from epoxy-coated anodized aluminum with a brilliant white finish. Nitrile valves and diaphragms perform well under harsh conditions . Accepts low-resistance 2" hose adapters for maximum performance . 31 GPM @ 70 strokes/min. @ 0 head. . Body: Anodized aluminum .
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
Spares Kit for Whale Gulper 220 Pump from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.
|
Gusher 25 Service Kit from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.
|
Adapter—3/4" BSP Female to 15mm (Qty. 2) from WHALE PUMPS
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.
|
Service Kit for 30124-0000 Bilge Pump, 8 GPM from JABSCO
Kit includes Connecting rod. Diaphragm. Ppulsation dampener. Valve plate. Valve set (inlet and outlet) .
|
|
|
|
|
|
from FYNSPRAY, X 1, X 3, X 1, X 3, from WHALE PUMPS, 4 GPM from JABSCO, Service Kit
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Parts->Electric Bilge Pump Service Kit
Kit includes Connecting rod. Diaphragm. Ppulsation dampener. Valve plate. Valve set (inlet and outlet) .
Part No: 43990-0062
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Electric Bilge Pump Service Kit
Kit includes Connecting rod. Diaphragm. Ppulsation dampener. Valve plate. Valve set (inlet and outlet) .
Part No: 43990-0063
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK0405
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK0502
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK0553
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Pressure Pump Parts->Service Kits for FynSpray Faucets
Parts and Servie needs for FynSpray galley faucets.
Part No: WSK-62
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
Service Kit for Sensor Max VSD Water Pump.
Part No: 18920-9043
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts->Titan Winch Handle Service Kits
Titan Winch Handle Service Kits.
Part No: 29140003
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK3706
|
|
|
|
Home -> Plumbing -> Fittings & Valves
One size kit fits all Forespar® "Y" valves. Kits include handle and all internal parts.
Part No: 902006
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts->Titan Winch Handle Service Kits
Titan Winch Handle Service Kits.
Part No: 29140001
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories
Just west of Marathon, just north of Heaven. The endless bridge that connects the keys is now a pair of sunglasses every bit as impressive. A traditional large frame, it boasts double-bridge aviator styling and integral spring hinges. From this bridge, you can see Paradise. Hinge: Spring. Lens Size: L. Frame Fit: ML. Rx-able. Frames: Satin Gunmetal. Lenses: 400 CR-39 - Gray . Costa Del Mar Lenses 580TM Lenses Yellow light is the enemy.
Part No: SE 22 DGP
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Just add oars and your fishing gear A great boat for fishermen with plenty of gear. Accepts a 2. 5hp gas motor at the stern (optional mount sold separately, below) and a 12V DC motor at the stern or bow. Includes two rod holders, a gear bag, a battery pouch, tie downs, grab lines and drain plugs. Boston safety valves make inflation/deflation a breeze. Oarlocks, chafing pads and inflatable seats included. Length: 9'2" Boat Beam: 4'6" Weight: 30lb. . Capacity: 4/ 700lbs. .
Part No: U211GRN-00-001
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Cap with hose connection allows you to drain gray water tank easily.
Part No: 39463
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories
Secure objects of almost any shape or size with no tools. Each clamp holds objects between 1/2" and 4" in diameter. Made of flexible nylon with UV inhibitors. Won't rust; resistant to most chemicals.
Part No: 39103
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories
4" x 3" sponge ring works with the grey water seal or directly on sewer hose for an odor proof connection to dump station.
Part No: 39313
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Connect two hoses quickly and easily for added length.
Part No: 39543
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> U.S./Yacht Ensign Flags->U.S. Flags
Hoist 'em high and proud! Durable nylon flags are made for marine use. Sewn flags feature embroidered or sewn stars and double-stitched stripes for added strength. Made in the U. S. A. The rule for sizing ensigns and yacht ensigns is one inch of length (of the fly) for every foot of boat length, flown on a staff that is twice as high as the hoist of the flag.
Part No: 8448
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> U.S./Yacht Ensign Flags->U.S. Flags
Hoist 'em high and proud! Durable nylon flags are made for marine use. Sewn flags feature embroidered or sewn stars and double-stitched stripes for added strength. Made in the U. S. A. The rule for sizing ensigns and yacht ensigns is one inch of length (of the fly) for every foot of boat length, flown on a staff that is twice as high as the hoist of the flag.
Part No: 8460
|
|
|
|
Home -> Electrical -> Chargers & Inverters->Sunsei Flex™ Flexible Solar Panels
Flexible solar panels mount anywhere These flexible panels use the latest technology for nonbreakable solar cells to create a lightweight, flexible and durable solar panel that can be mounted just about anywhere. Sunsei Flex™ flexible panels are engineered to maintain and charge 12V batteries. They also power most portable electronics, such as cellular phones, GPS receivers, PDAs and laptops, using their optional 12V power socket. Sunsei Flex Panels: Generate power under cloudy or rainy skies.
Part No: 25106
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Solar Panels->Sunsei Flex™ Flexible Solar Panels
Flexible solar panels mount anywhere These flexible panels use the latest technology for nonbreakable solar cells to create a lightweight, flexible and durable solar panel that can be mounted just about anywhere. Sunsei Flex™ flexible panels are engineered to maintain and charge 12V batteries. They also power most portable electronics, such as cellular phones, GPS receivers, PDAs and laptops, using their optional 12V power socket. Sunsei Flex Panels: Generate power under cloudy or rainy skies.
Part No: 25104
|
|
|
|
Protect your marine radio from damage and tough conditionsProtective bezel and cover will guard against splashes and spray to extend the life of your onboard stereo. Flip-up cover offers easy access to your radio. Constructed of UV resistant plastic.
Part No: SG1
|
|
|
|
Home -> Sailboat -> Blocks->Series 19 Utility Blocks
Stainless-steel blocks with acetal sheaves for dinghy control lines. Sheave: UV-stabilized acetal. Ball Bearings: Plain bearings. Sheave Size: 3/4". Line Dia: 3/16" max. Cheek Material/Finish: Polished 316 stainless steel.
Part No: RF806S
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Shackle Guards
Place a protective buffer between the spinnaker pole ends and your after-guy shackle. Shackle guards can also be used on lifelines to help skirt genoas. High strength polyethylene. UV inhibited for long life.
Part No: 300091
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Shackle Guards
Place a protective buffer between the spinnaker pole ends and your after-guy shackle. Shackle guards can also be used on lifelines to help skirt genoas. High strength polyethylene. UV inhibited for long life.
Part No: 300086
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Shackle Guards
Place a protective buffer between the spinnaker pole ends and your after-guy shackle. Shackle guards can also be used on lifelines to help skirt genoas. High strength polyethylene. UV inhibited for long life.
Part No: 300007
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Shackle Guards
Place a protective buffer between the spinnaker pole ends and your after-guy shackle. Shackle guards can also be used on lifelines to help skirt genoas. High strength polyethylene. UV inhibited for long life.
Part No: 300085
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Shackle Guards
Place a protective buffer between the spinnaker pole ends and your after-guy shackle. Shackle guards can also be used on lifelines to help skirt genoas. High strength polyethylene. UV inhibited for long life.
Part No: 300090
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Shackle Guards
Place a protective buffer between the spinnaker pole ends and your after-guy shackle. Shackle guards can also be used on lifelines to help skirt genoas. High strength polyethylene. UV inhibited for long life.
Part No: 300006
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Shackle Guards
Place a protective buffer between the spinnaker pole ends and your after-guy shackle. Shackle guards can also be used on lifelines to help skirt genoas. High strength polyethylene. UV inhibited for long life.
Part No: 300092
|
|
|