Top Sellers
12" Super Shock Cord, Blue from POLYFLEX
Unaffected by chemicals, sunlight, salt water and oil. Perfect for cover tie-downs, lashing jibs on deck when the chute is up, etc. Molded elastomers with glass-reinforced nylon hooks always return to original length.
|
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
Polycord Value Pack (10 polycords in assorted colors & lengths) from POLYFLEX
Unaffected by chemicals, sunlight, salt water and oil. Perfect for cover tie-downs, lashing jibs on deck when the chute is up, etc. Molded elastomers with glass-reinforced nylon hooks always return to original length.
|
Oval Deck Pipe from SEAFIT
Accepts line, thimble, shackle and chain to 3/8". Hook under cover holds chain and cover in place. Material: Chromed-plated bronze . Flange: 6. 25" x 4. 5" . I. D. : 4-3/6"L x 2-3/8"W .
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
3/16" Stock Dia. U-Bolt, 1-3/8” Thread Length, 1-3/16" Hole Spacing, 1" Eye Dia. from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .
|
Snap Hook, 4"L, 3300lb. Breaking Strength from WICHARD
Drop-forged from 316L stainless steel for outstanding strength.
|
Pelican Hook Repair Kit from JOHNSON, C.S.
Repair snap gates for safetyRepair kit for lost or worn latching mechanisms on snap gate hooks.
|
Universal Bungee with Plastic Coated Hook Ends from STARBRITE
Natural rubber core covered with polyethylene braid is rot proof, UV-resistant and long-wearing plastic coated steel hooks.
|
Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Removable Folding Pontoon Ladder from WINDLINE
Extremely sturdy four-step ladder is constructed of 1" dia. aluminum tubing with wide plastic steps. Integrated swim handles provide hand support. The ladder pops in and out of flush-mounted cups on the deck. Folds to about 4" thick for storage. Mounts on deck in the folded position. So lightweight it floats! Includes mounting cups and hardware. Mounting Style: Hook-Over-Gunwale. Material: Aluminum/Plastic. Number of Steps: 4. Stand-Off Depth: 6".
|
Gunwale Mount Pontoon Ladder, 4 Step from GARELICK
For use on pontoon boat side gates. Special vinyl sleeves between the first and second step protect the pontoon from damage. The overrail hooks snap into amounting sockets (included) suitable for temporary or permanent mounting. Made of durable 1''dia. aluminum tubing with comfortable white molded plastic steps. Hooks fold flat for compact storage. Four steps. 50''L. Hooks:13.
|
|
from SEAFIT, Shock Cord Hooks from SEAFIT, Shock Cord Hook, 16" Cord Dia
|
|
Home -> Sailboat -> Rigging Products->Shock Cord Hooks
White nylon hooks with recessed knot openings.
Part No: C1304000
|
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Shock Cord Hooks
Stainless steel with rubber coated tips.
Part No: C0910032
|
|
|
|
|
Home -> Cordage -> Rigging Products -> Shock Cord->Shock Cord Hooks
White nylon hooks with recessed knot openings.
Part No: C1308000
|
|
|
|
|
Home -> Cordage -> Rigging Products->Stainless-Steel Shock Cord Hooks
Stainless steel with rubber coated tips.
Part No: C0908024
|
|
|
|
|
Home -> Cordage -> Rigging Products -> Shock Cord->Shock Cord Hooks
White nylon hooks with recessed knot openings.
Part No: PNP56
|
|
|
|
Home -> Sailboat -> Rigging Products->Shock Cord Hooks
Using a slip ring to conceal the gripper, these hooks grip tenaciously and look machine-made, yet take only seconds to install! Made from rugged acetal resin.
Part No: PA140/2
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Shock Cord Hooks
Using a slip ring to conceal the gripper, these hooks grip tenaciously and look machine-made, yet take only seconds to install! Made from rugged acetal resin.
Part No: PA141/2
|
|
|
|
|
Home -> Cordage -> Rigging Products -> Shock Cord
White nylon hooks with recessed knot openings.
|
|
|
|
Home -> Sailboat -> Rigging Products
Lets you connect shock cord to webbing for hiking straps, sail ties, etc. For 1" webbing and 1/4" shock cord.
Part No: PA145BK/2
|
|
|
|
Home -> Cordage -> Rigging Products -> Shock Cord
Use them all over the boat for organizing sheets and halyards, extra line in lockers or even clothes and towels. Uses 3/16'' or 1/4'' shock cord and #8 fasteners . Fasteners not included.
Part No: RF6010C
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape
These polyethylene-coated coated shoe covers provide non-slip protection on most surfaces. One size fits most shoes.
Part No: 68431
|
|
|
|
Home -> Sailboat -> Rigging Products
Emergency cutter slices through shrouds and stays, even steel cable and rodsCuts shrouds and stays simply and quickly whether they are under tension or loose. An excellent tool to have onboard in emergency situations where a mast or rigging has broken and must be secured or separated from the vessel. Once loaded, catch the shroud in the jaw and fire. No manual force is necessary, just one shot per shroud. Locking system allows safe conditions of use and no fire arms license is required.
Part No: 39339
|
|
|
|
|
10 Shootit cable cutter rearming cartridges.
Part No: 39374
|
|
|
|
Home -> Electrical -> Shore Power
Water-resistant adapters are fully molded . Includes 104A, 105A, 121A adapters. Includes heavy-duty nylon zippered storage bag with handle . Includes sealing covers.
Part No: 199122
|
|
|
|
This glossy, acrylic-capped ABS plastic box has a sturdy "Slimline" door with Southco M,3 "grabber" latches that close securely and prevent looseness or rattling. Features hidden fasteners and a reinforced mounting area with holes for two 30 amp fittings.
Part No: 44826000
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets
The organized way to store and transport your shore power cord and adapters. Internal pockets hold up to six adapters. A trap door allows the bag to hold the cord while it’s connected. Tough nylon-reinforced vinyl fabric is easy to keep clean.
Part No: BAG
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets
Keep your 30A shore power cords organized and out of the water with these clips that quickly and easily attach to your boat’s tube or wire rails. Or use to hang fishing rods, buckets, or other accessories. Made of virtually unbreakable, UV-stable material.
Part No: CLIP-01
|
|
|
|
Connect and store 30 amp shore power and phone cords in this high-gloss acrylic capped ABS box. Molded supports hold coiled power cord and installed connector. Gasketed "Slimline" door with hidden fasteners for a flush look and weather resistance.
Part No: 44815000
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets
Keep heavy shore power cords and water hoses away from the water and off the gunwale. Thick-walled stainless steel cable guide with curved lower portion fits into most rod holders. 2-1/2" eye keeps cords high enough to clear toerails and railings and stands straight up as the pole is bent slightly. Electropolished. 28"H.
Part No: CH-1
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables -> Barbecues And Mounts->Gourmet Series Grill Mounts
Mounts for Catalina or Newport Gas Grills.
Part No: T10-655
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->ShoreMaster™ IBA Life Raft
This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. Welded seams (significantly stronger than glued seams) give the raft an extremely rugged construction. All 8-man ShoreMaster liferafts include a boarding ladder. A lightweight, waterproof, durable valise is available for all sizes of ShoreMaster liferafts. Valises are made of a high visibility material. A space saving low profile fiberglass container is available for all ShoreMaster liferafts.
Part No: 50-R/R-4M-IBA-L
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->ShoreMaster™ IBA Life Raft
This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. Welded seams (significantly stronger than glued seams) give the raft an extremely rugged construction. All 8-man ShoreMaster liferafts include a boarding ladder. A lightweight, waterproof, durable valise is available for all sizes of ShoreMaster liferafts. Valises are made of a high visibility material. A space saving low profile fiberglass container is available for all ShoreMaster liferafts.
Part No: 50-R/R-4M-IBA-V
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->ShoreMaster™ IBA Life Raft
This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. Welded seams (significantly stronger than glued seams) give the raft an extremely rugged construction. All 8-man ShoreMaster liferafts include a boarding ladder. A lightweight, waterproof, durable valise is available for all sizes of ShoreMaster liferafts. Valises are made of a high visibility material. A space saving low profile fiberglass container is available for all ShoreMaster liferafts.
Part No: 50-R/R-6M-IBA-L
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->ShoreMaster™ IBA Life Raft
This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. Welded seams (significantly stronger than glued seams) give the raft an extremely rugged construction. All 8-man ShoreMaster liferafts include a boarding ladder. A lightweight, waterproof, durable valise is available for all sizes of ShoreMaster liferafts. Valises are made of a high visibility material. A space saving low profile fiberglass container is available for all ShoreMaster liferafts.
Part No: 50-R/R-6M-IBA-V
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->ShoreMaster™ IBA Life Raft
This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. Welded seams (significantly stronger than glued seams) give the raft an extremely rugged construction. All 8-man ShoreMaster liferafts include a boarding ladder. A lightweight, waterproof, durable valise is available for all sizes of ShoreMaster liferafts. Valises are made of a high visibility material. A space saving low profile fiberglass container is available for all ShoreMaster liferafts.
Part No: 50-R/R-8M-IBA-L
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->ShoreMaster™ IBA Life Raft
This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. Welded seams (significantly stronger than glued seams) give the raft an extremely rugged construction. All 8-man ShoreMaster liferafts include a boarding ladder. A lightweight, waterproof, durable valise is available for all sizes of ShoreMaster liferafts. Valises are made of a high visibility material. A space saving low profile fiberglass container is available for all ShoreMaster liferafts.
Part No: 50-R/R-8M-IBA-V
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets
Simple 1' webbing loops with hook-and-loop closures help you tame your shorepower cord. Useful for dock lines and running rigging, too.
Part No: 6058
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrubbers,Sponges,Buckets->Heavy-Duty Scrub Brushes
These hand-held brushes clean where regular deck brushes don't Durable plastic head and handles stand up to tough cleaning chemicals. The Short Handle Scrub Brush has a 9 1/2"L handle that lets you get to areas that can’t be reached by a hand scrubber and the Bait Tank Scrub Brush has an extra-long, 21" handle for hard-to-reach areas. Short handled brush for scrubbing around bow rollers and stantion posts.
Part No: 193862
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Switches->Toggle Switches
All non-corroding construction with moisture-repellent insulators and silver contacts. MOM/M-On denote momentary. Lighted Toggle Swithces: White Off/Red On Chrome-Plated: Single Pole Switches, Off/On positions only Max 10A@12V Fit panels to 1/4" thick Mount in 15/32" dia.
Part No: M-493-BP
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots->Short Performance Sailing Boots
Gill Short Performance Sailing Boots 100% natural rubber mid-calf length boots (easy to step in to) . Non-slip razor cut soles for grip . Quick drying polyester lining removable cushioned inner soles . Reinforced heels and toes .
Part No: GRAPHITE-10 1/2
|
|
|
