Top Sellers
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
Brass-Bristle Brush from SEAFIT
Solid brass bristles won't rust or corrodeLarge, plastic utility brush has solid brass bristles that won’t rust or corrode. Brass bristles are slightly softer than stainless steel and are therefore less intrusive to surfaces. Molded plastic handle provides solid, controlled grip. Bristles: 5/8"D. Overall length: 8 1/2". Molded plastic handle provides solid, controlled grip. 5/8"L bristles.
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Glasskoter Resin Roller Cover - 9" x 3/8" Nap from CORONA
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.
|
Electronic Horn, Black from AQUA-SIGNAL
This under-deck hidden horn is designed for vessels under 12 meters, draws less than 1/2 amp and is easily installed in a standard 2 1/4" cutout. Each unit is completely sealed and comes with a waterproof gasket. All openings are sealed to let sound out but prevent water from coming in. Loudness dB: 106-108dB. Design Standards: USCG, CE. Dimensions: 4. 92"L x 3. 11"W x 3. 43"D. Draw: Less than 0. 5A at 12V.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
|
|
WL/1 Fairlead Model from SPINLOCK
New low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment. WL/1 Fairlead model includes stainless-steel bullseye for strength.
|
|
Small Edging, 1, from SCHAEFER, Small DockVest, 8"W from TAYLOR, 5" x 1
|
|
Small Center Console 42”H x 36”W x 24”D Medium Center Console 44”H x 40”W x 30”D Large Center Console 45”H x 46”W x 40”D UV Protection, Polyurethane Coating Air vents for ventilation Secure Draw String Hem.
Part No: 80400
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40400
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
These pad eyes are designed for rope shackles but can be used with steel shackles also. Large diameter radii for low rope wear. For up to 1/2" (12mm) line.
Part No: CN44BLK
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Winch Wheel & Acc. Cove->Cockpit Bags
Keep sheets, tools and other gear organized and handy Keep your cockpit clutter-free with these multi-pocketed cockpit organizers. Made of durable UV-protected nylon, they feature a large main pouch with cinchable sides to keep decks clear of lines, water bottles and gear. A stowable rain cover pulls over the main pouch to protect contents while an outside mesh pocket grants easy access to snacks or sunscreen. The large size has a third pocket with closure to keep extra items secure.
Part No: BP410
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware
Heavy-duty vinyl bumper prevents your boat from smacking the hard corner of your dock.
Part No: 96008
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival -> Survival Supplies
Keep all your mandatory safety and emergency gear organized in this commercial-weight, ventilated bag. Holds four adult, and two children’s PFDs in main compartments, plus separate storage area in lid holds first-aid supplies, safety flares, distress flag, air horn, etc. Bag has heavy web carrying handles, nonskid feet on bottom, and grommet openings for drainage. Nylon, self-repairing zippers on bag and lid. D-rings on each end allow bag to be secured to deck on boat or dinghy. Model 3118.
Part No: 3118-6
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Awning De Luxe
Shelter and shade your cockpit in just minutes! Cockpit awning drapes over your boom to provide shade and protection from sun and rain. A nylon webbing system makes it easy to attach the awning corners to lifelines or a stern pulpit and uses easily adjustable plastic buckles. Made of durable, UV-protected ripstop nylon fabric with a reinforced hem and two built-in vents, one on each side, for extra ventilation on hot days.
Part No: BP102
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Flex-Mold Non-Skid Repair Kits
Repair mold to match original non-skid patterns for simple do-it-yourself repairs. Gelcote and fiberglass. Click here to see instruction video.
Part No: 75-770
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Flex-Mold Non-Skid Repair Kits
Repair mold to match original non-skid patterns for simple do-it-yourself repairs. Gelcote and fiberglass. Click here to see instruction video.
Part No: 75-771
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7884
|
|
|
|
Home -> Sailboat -> Blocks->Dinghy Snatch Blocks
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
Part No: HA4475/1
|
|
|
|
High-performance PFD/safety harness combo integrates climbing technology with offshore features. Lightweight, high-tensile fiber tether attachment loop has the strength of steel with significantly less weight. Twin Petzl buckles provide instant adjustment and a secure fit. Won’t inflate in humid or heavy weather. Includes a SOLAS-approved Aquaspec light and CE-approved spray hood. 33. 8lb. of buoyancy (150N). Not USCG approved. Buoyancy: 33. 8lb.
Part No: DW-LJH/A1
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock & Post Bumpers
Closed-cell foam encased in a soft fabric cover protects your boat against contact damage. Unlike traditional vinyl or rubber, it won't squeak or mar, and the high-density foam will never leak or become flat. Polyester cover is UV-, mildew-, dirt- and abrasion- resistant. Cleans easily. Flexible enough to mount on curves or around corners. Material: Polyester/Foam . Attachment Method: Mounting tabs/fasteners . Cross Section Shape: Semi-circular . Shock Absorption Mechanism: Foam Padding .
Part No: DDB2.30
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock & Post Bumpers
Closed-cell foam encased in a soft fabric cover protects your boat against contact damage. Unlike traditional vinyl or rubber, it won't squeak or mar, and the high-density foam will never leak or become flat. Polyester cover is UV-, mildew-, dirt- and abrasion- resistant. Cleans easily. Flexible enough to mount on curves or around corners. Material: Polyester/Foam . Attachment Method: Mounting tabs/fasteners . Cross Section Shape: Semi-circular . Shock Absorption Mechanism: Foam Padding .
Part No: DDB2.60
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes->Dri-Stow™ Dry Bags
The transparent Dri-Stow™ dry bag is great for storing items you need during a day on the river. Constructed with the occasional boater in mind, these bags are made of a 19-oz. vinyl that is tough, yet very economical. Material: 19oz.
Part No: 2939 SC
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46066
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46057
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46097
|
|
|
|
Home -> Electrical -> Interior Lighting -> Fluorescent Lights
Commercial-Grade Watertight Multipurpose Luminaire Handy dimensions offer optimized use on board, for example, workshops, engine rooms, stores, holds and passage ways. Electric flexible wiring, heat-resistant up to 105°C. Voltage 12 V DC, 24 V DC . Housing material: Zinc coated steel sheet, deep drawn, seamless, including mounting plate .
Part No: 10242-1
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Anchor Rollers
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Part No: 66840060
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->V-Cleats
Inline static cleats are tremendously strong and abrasion-resistant. Teflon®-impregnated carbon fiber composite lasts far longer than traditional plastic cleats. Low-profile, snag-free cleats match existing Clam Cleat hole patterns.
Part No: RF5101
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Fixed Bail Snap Shackles
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
Part No: 2470
|
|
|
|
Home -> Electrical -> Meters & Distribution
60 common DC labels Reinforced, weatherproof material Used on all Contura Waterproof Circuit Breaker Panels Used on Contura Waterproof Fuse Panels Used on ST Blade Fuse Blocks.
Part No: 8214
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Cockpit Awnings/Cushions->Free Hanging Sunshade
This unique sunshade sets up in minutes to offer relief from the sun's penetrating rays anywhere onboard. It uses two fiberglass and carbon-fiber composite poles that install quickly, just like a tent, and a center grommet that attaches to a halyard for easy height adjustment. Nylon lines at each corner attach to any point on the boat you would like for custom positioning. When the sun has gone down, it disassembles in the same way a tent does. Made from durable UV-protected rip-stop nylon.
Part No: BP150
|
|
|
|
Projects 4" from wall or bulkhead.
Part No: 8017
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes->Grommetted Sea-Stow Dry Bags
Sea Kayaker Magazine's Reader's Choice Dry Bag for 2005! 70-denier urethane-coated nylon keeps the weight of this bag to a minimum, and the rugged material slides easily in and out of fiberglass and polyethylene kayaks The bags have a durable, clear urethane window that makes finding stuff a breeze The waterproof StormStrip™ closure doubles as a carry handle and also includes a handy D-ring Sizes are measured fully packed and closed.
Part No: 2972 SR
|
|
|
|
Home -> Sailboat -> Rigging Products->Hollow Fids
The tapered stainless body of this fine fid gently opens the strands of nylon line, leaving you with a hole through which you can pass the strand. The rounded end allows you to put pressure on tightly laid lines.
Part No: C540
|
|
|
|
Home -> Fishing -> Fishing Accessories
Drawstring bag With closure. Small hole open mesh. Great for chum.
Part No: 4703
|
|
|
|
Home -> Fishing -> Fishing Accessories->Hi-Performance "Bite This" Kite Accessories
The most comprehensive line of kite fishing products available to the sports-fishing enthusiast.
Part No: 88962
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Main Reefing & Furling->Lazy Jack Systems
Lazy Jacks control the mainsail when reefing or dousing, and easily tame today’s mainsails, whether full-battened or conventional type. Schaefer’s Lazy Jacks funnel the sail down to the boom and retain it, keeping you safe in the cockpit and allowing you to properly secure the sail when you are moored. Thimbled eyestraps attached to the bottom of your boom keep the hardware away from the cover and enable you to tuck your sailcover under the lazy jack control lines.
Part No: 99-62
|
|
|
