Top Sellers
F8B-9 Direct Bolt-On Engine Cooling Pump, Detroit Diesel OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
|
13-1/4" x 17" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
10" x 13" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
12-1/4" x 15" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
Small Boat Clevis Pin Kit from JOHNSON, C.S.
Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16".
|
Impeller 09-812B - For pump size F6B from JOHNSON PUMPS
More durable, longer lasting replacement pump has a one-piece bronze body and bronze end-plate with a replaceable cam and wear-plate so it can be rebuilt when needed.
|
Impeller article number 09-821B from JOHNSON PUMP
Impeller-Fuel Transfer Nitrile|Impeller-Fuel Transfer Nitrile.
|
Light-Saver® Water-Activated Strobe Light from BUZTRONICS, INC.
Small and unobtrusive, this water-activated, bright LED strobe can be seen over one mile at nightThe buoyant, waterproof plastic case measures just 2"L x 1"dia. and comes with three pre-installed AG13 batteries with 80-100 hour operating life. Includes a lanyard and clip for attachment to PFDs or other items on your boat.
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
Bilge Pro Replacement Motor Cartridge for 500gph Pumps from JOHNSON PUMP
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
Small Bronze Ball Valves with Brass Ball, 3/8" NPT from APOLLO
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.
|
Power Pack - Johnson/Evinrude -18-5758 from SIERRA
Replacement part for Johnson/Evinrude Outboard #582453, 583380 OEM #0582452.
|
|
from JOHNSON, Small, INC, 13"L from FELCO
|
|
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
Part No: 80240
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40240
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage -> Teak Storage Products->Teak Spice Racks
Using only plantation-grown teak, these fine accessories make life aboard more pleasant. Large Spice Rack, 2-3/4H x 23-1/2W x 3-3/4D.
Part No: 62436
|
|
![Small Teak Towel Bar from AFI]( "Small Teak Towel Bar from AFI")
|
|
Home -> Cabin & Galley -> Containers & Storage->Teak Towel Bars/Rack
Using only plantation-grown teak, these fine accessories make life aboard more pleasant. Small Towel Bar 1-1/16"H x 14"L x 2-5/8"D. Large Towel Bar 1-1/16"H x 23'L x 2-5/8"D.
Part No: 62330
|
|
|
|
Home -> Cordage -> Rigging Products->Spreader Bar Trapeze Harness
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.
Part No: 4901GCS
|
|
![Small Trolling Release Snap - 2 pk from SCOTTY DOWNRIGGERS]( "Small Trolling Release Snap - 2 pk from SCOTTY DOWNRIGGERS")
|
|
Home -> Fishing -> Fishing Accessories->Snaps
Nickel silver and stainless steel snaps allow stacking of releases. Terminal snap is for end of cable. Large snaps are Nickel plated. Smaller snaps are in stainless steel.
Part No: 1156
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes -> Kayak Accessories->Tuff Sack Dry Bags
The Tuff Sack Dry Bag comes in a variety of sizes that are perfect for day trips or week long treks. Tuff Sack features the innovative StormStrip™ system coupled with heavy duty plastic buckles to provide a great seal and a convenient carrying handle A rugged 18oz. Extra-Small size is great for sunscreen, keys and snacks. Medium or Large bags are ideal for sleeping bags and clothes. Extra-Long (XL) is the perfect size for a Roll-A-Table or tent, and has a side-carry handle for easy transport.
Part No: 2945 SB
|
|
|
|
Home -> Sailboat -> Rigging Products -> Shroud Covers, Mast Boots->Leather Turnbuckle Covers
Add a distinctive look and chafe protection, too. Natural gray leather attaches and removes easily with hook-and-loop strips.
Part No: 1405-12
|
|
|
|
Home -> Sailboat -> Rigging Products->Professional Wire Cutters
Extremely durable Swiss-made Felco precision cable cutters have unique triangular jaws that cut clean, without leaving frayed ends. All models have forged aluminum handles that are lightweight, yet incredibly strong.
Part No: C9
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Water Pump Shafts
Inertia or friction welding combines 8620 bearing quality with 17-4 PH stainless steel for durability.
Part No: 18-2185
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Quick-Release Shroud Levers
Permit easy rigging adjustments, and allow masts to be stepped and unstepped easily. The lever is easy to open and close under load and has a quick release pin for security. Working Load Small: 400lb.
Part No: 15-212
|
|
|
|
Home -> Sailboat -> Rigging Products->Spreader Boots
Protect your sails from ripping or tearing on your boat’s spreaders with these soft injection-molded UV-resistant synthetic rubber spreader boots. They fit wing and round spreaders, feature a smaller frontal area for less wind resistance and have greater surface area on the end to reduce sail chafing. They install quickly and easily over spreader ends and shrouds, and secure with self bonding rigging tape, Model 318600 (sold separately).
Part No: SPRBOOTSS
|
|
|
|
Home -> Electrical -> Chargers & Inverters
It is designed to monitor and charge a second battery using a portion of the current that is charging a main battery. This 25-amp combiner/isolator integrates an optional solenoid drive, remote voltage sense for more accurate sensing, High and Low battery cut-out to prevent over/undercharging, and automatic 12- or 24-volt operation. The basic design makes connecting the SBC as simple as it can get. Like other three-wire voltage followers, this is a very simple device to connect and setup.
Part No: ME-SBC
|
|
|
|
Home -> Fishing -> Fishing Accessories
Never miss another fish because the hook wasn't sharp enough to penetrate Designed in a self-contained shirt pocket clip pen-like housing made of corrosion-proof anodized aluminum. On one end is the collect-lock vise which quickly and securely grips your hooks (up to 3/0) for precise sharpening. When done sharpening your hook, simply unlock your hook, screw the file back into the pen, clip it back into your pocket, and get on with your day of fishing.
Part No: 1131050
|
|
|
|
Home -> Fishing -> Fishing Accessories
The Berkley TEC Smart Knife Sharpening System is great for getting the sharpest edge on all of your knives.
Part No: 1131058
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Trim Tabs->Smart Tabs Automatic Trim Tab System
Cut bow rise by 50%, get faster and smoother acceleration, tow anything with ease and run at top speeds without porpoising. With no hydraulics and electrical connections, Smart Tabs continually adjust to water conditions like shock absorbers. Easily installed on wood, fiberglass or aluminum transoms in less than an hour with all mounting hardware and sealant materials provided. Includes two actuators sealed in EDPM rubber boots, two polished stainless steel plates, instructions and templates.
Part No: ST980-30
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Trim Tabs->Smart Tabs Automatic Trim Tab System
Cut bow rise by 50%, get faster and smoother acceleration, tow anything with ease and run at top speeds without porpoising. With no hydraulics and electrical connections, Smart Tabs continually adjust to water conditions like shock absorbers. Easily installed on wood, fiberglass or aluminum transoms in less than an hour with all mounting hardware and sealant materials provided. Includes two actuators sealed in EDPM rubber boots, two polished stainless steel plates, instructions and templates.
Part No: ST980-40
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Trim Tabs->Smart Tabs Automatic Trim Tab System
Cut bow rise by 50%, get faster and smoother acceleration, tow anything with ease and run at top speeds without porpoising. With no hydraulics and electrical connections, Smart Tabs continually adjust to water conditions like shock absorbers. Easily installed on wood, fiberglass or aluminum transoms in less than an hour with all mounting hardware and sealant materials provided. Includes two actuators sealed in EDPM rubber boots, two polished stainless steel plates, instructions and templates.
Part No: ST1290-60
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Smart Tabs Automatic Trim Tab System
Cut bow rise by 50%, get faster and smoother acceleration, tow anything with ease and run at top speeds without porpoising. With no hydraulics and electrical connections, Smart Tabs continually adjust to water conditions like shock absorbers. Easily installed on wood, fiberglass or aluminum transoms in less than an hour with all mounting hardware and sealant materials provided. Includes two actuators sealed in EDPM rubber boots, two polished stainless steel plates, instructions and templates.
Part No: ST1290-80
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Smart Tabs SX Performance Plus Composite Trim Tabs
The NEW SX series incoporates all of the fully automatic features of popular SMART TABS, in addition to the rust and corrosion free durability of molded compsite materials. Benefits include improving fuel economy by 11%, reducing bow rise by 40%, and lowering on-plane speed by 35%, great for tubing. Thermo Molded Copolymer Composite material provides superior strength and resilience for any rough water situation. Assembly can be completed in seconds and the installation in a few minutes. 5 2.
Part No: SX9510-40BL
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Smart Tabs SX Performance Plus Composite Trim Tabs
The NEW SX series incoporates all of the fully automatic features of popular SMART TABS, in addition to the rust and corrosion free durability of molded compsite materials. Benefits include improving fuel economy by 11%, reducing bow rise by 40%, and lowering on-plane speed by 35%, great for tubing. Thermo Molded Copolymer Composite material provides superior strength and resilience for any rough water situation. Assembly can be completed in seconds and the installation in a few minutes. 5 2.
Part No: SX9510-30BL
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Smart Tabs SX Performance Plus Composite Trim Tabs
The NEW SX series incoporates all of the fully automatic features of popular SMART TABS, in addition to the rust and corrosion free durability of molded compsite materials. Benefits include improving fuel economy by 11%, reducing bow rise by 40%, and lowering on-plane speed by 35%, great for tubing. Thermo Molded Copolymer Composite material provides superior strength and resilience for any rough water situation. Assembly can be completed in seconds and the installation in a few minutes. 5 2.
Part No: SX9510-60BL
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Smart Tabs SX Performance Plus Composite Trim Tabs
The NEW SX series incoporates all of the fully automatic features of popular SMART TABS, in addition to the rust and corrosion free durability of molded compsite materials. Benefits include improving fuel economy by 11%, reducing bow rise by 40%, and lowering on-plane speed by 35%, great for tubing. Thermo Molded Copolymer Composite material provides superior strength and resilience for any rough water situation. Assembly can be completed in seconds and the installation in a few minutes. 5 2.
Part No: SX9510-80BL
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets
Charles’ patented Smart-Y Adapters enable boaters to reliably double available shore voltage. Designed for long life, the Smart-Y eliminates the potential for shock hazard when one leg is disconnected; both legs must be plugged into the power source before current will flow. Blade Style: Female: 100A 125/250V twist-lock; Male: Two 50A 125/250 twist-lock . Material: UL-recognized vinyl, nickel-plated bronze blades, glass-filled nylon/polycarbonate internal components .
Part No: 93-SMTY100-A
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->SmartFind EPIRBs
Meeting the demands of both commercial mariners and recreational boaters, the new McMurdo SMARTFIND heralds the arrival of the next generation in EPIRB technology. Category I: The Auto Float Free Housing meets SOLAS requirements and will automatically deploy the EPIRB when submerged to a depth lower than 2–4 metres in the sea. Non hazardous battery for safe and easy transportation . Unique Carry Safe Manual Bracket for safe transportation or Auto Float Free Housing meeting SOLAS requirements.
Part No: 82-800-004A
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->SmartFind EPIRBs
E5 SMARTFIND is a 406 MHz EPIRB designed to operate with the COSPAS-SARSAT international search and rescue system. Category II: Once removed from its Carry Safe Manual Bracket the unit can be activated automatically by immersion in water, or manually by following the activation instructions printed on the unit. Non hazardous battery for safe and easy transportation . Comprehensive diagnostic and self-test facilities. Once activated, will transmit for a minimum of 48 hours. 5 year warranty.
Part No: 82-800-003A
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival -> PLBs & EPIRBs->SmartFind Plus G5 Category I & Category II GPS-Enabled EPIRBs
Meeting the demands of both commercial mariners and recreational boaters, this 406MHz EPIRB enhances the lifesaving capabilities of conventional beacons with a built in GPS that incorporates your positional information into the distress message it transmits. Other features include a non-hazardous battery for safe and easy transportation, high brightness LED flashing locator lights and comprehensive diagnostic and self-test facilities. 5 year warranty. Type: EPIRB Category I Automatic Release.
Part No: 82-800-002A
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->SmartFind Plus G5 Category I & Category II GPS-Enabled EPIRBs
The new McMurdo SMARTFIND Plus utilizes next generation EPIRB technology by incorporating a high accuracy 12-channel GPS for enhanced position location. Other features include a non-hazardous battery for safe and easy transportation, high brightness LED flashing locator lights and comprehensive diagnostic and self-test facilities. Comes with SOLAS approved Auto Float Free Housing (Model 9941519) or a Carry Safe Manual Bracket (Model 9941527). 5 year warranty. 5 year battery life. 5MHz homing.
Part No: 82-800-001A
|
|
|
|
Home -> Electronics -> Autopilots -> Below Decks Pilots
An extra crewmember at your command, SmartPilot autopilot control heads offer advanced features and intuitive operation. Choose the SmartPilot control head that best suits your needs. The new SmartPilot Control Heads have all the same features and performance of the ST6001, ST7001 and ST8001 but with a new industrial design that cosmetically matches the ST60 Plus, C-Series and E-Series. Multiple remote control heads can be configured in your boat's system. High contrast easy-to-read displays .
|
|
|
|
Home -> Electronics -> Autopilots
The central nervous system of every SmartPilot system, Raymarine corepacks are comprised of a course computer,patented fluxgate electronic compass and rudder reference unit. In order to select the right SmartPilot corepack for your vessel you must first determine which autopilot drive unit is right for your steering system. Each corepack contains a SmartPilot course computer in either a standard configuration or a “G” version. T400 Corepacks are now called S3 Corepacks. Fluxgate compass - 3.
|
|
|
