Top Sellers
316 Stainless-Steel Hose Clamp, 7/16" to 11/16", SAE Size 3 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
|
304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
|
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Stainless-Steel Rub Rail, End, 1"H x 12"L; Requires #8 Screws from TACO PRODUCTS
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.
|
Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
|
Snap Hook, 4"L, 3300lb. Breaking Strength from WICHARD
Drop-forged from 316L stainless steel for outstanding strength.
|
|
|
Fastpin, 3/8 D X 1.5 SS from SCHAEFER
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
|
|
|
1"W x 8"L Tang from SCHAEFER
High-quality stainless steel tumbled and polished.
|
|
Stainless Steel Clamp, Stainless Steel Locknut from SIERRA
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware
Stainless Steel Clamp-on Jaw Slide, 7/8" Easy 1-2-3 step installation .
Part No: F11-1000-1
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders
Rugged, functional design clamps on to your boat with no need for drilling. Tough stainless steel tubing won’t corrode, while a plastic liner protects your rods. Self draining. Fits 3/4" to 1" rails.
Part No: 4395760S2
|
|
|
|
Home -> Electronics -> Radars->Radar Mast/Pole Mounts & Accessories
This application will fit most radomes and requires some assembly. Choose the top plate that fits your brand of antenna (each top accepts LTB option): Raymarine top plate (Model 5436290) Universal* top plate (Model 5436308) Garmin top plate (Model 6966022) . Choose secondary support: Two 48" stainless-steel struts with brackets and hardware (Model 5436324) One 48" stainless-steel strut and one rail stand-off for 1" rail and mounting hardware (Model 5436316).
Part No: RM-CL-300
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes -> Metal Polishes
Easy to apply and ideal for stainless steel, chrome, laminated plastics and aluminum surfaces. Wipes clean with no streaks or build-up, resists fingerprints and masks surface blemishes. 21oz.
Part No: 14002
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Stainless Steel Deck Fills
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
Part No: 6125C
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drinkware->Travel and Driver's Mugs
Wide-bottom stainless-steel vacuum travel mug is safe to take anywhere. It has a non-skid bottom which makes it almost spill-proof. This mug has a sip-through top and can be used for hot and cold beverages. Stainless-steel, vacuum driver’s mug is designed specifically to fit securely in most cup holders. This mug holds your favorite hot or cold beverage, has a secure sip-through top and stays cool to the touch. Travel style wide base Drivers style cup-holder size base.
Part No: SLD-SDC400B
|
|
|
|
Home -> Paint & Maintenance -> Tools -> Hand Tools
Better than regular scissors for tough shearing tasks Quality mini-shears cut through almost anything—even a penny! Great for odd jobs at home or on the boat. Made of rust-resistant stainless steel.
Part No: 31608
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Stainless-Steel Ellipti-Rail Grab Rails
Ergonomically designed elliptical handrails are made of mirror polished marine-grade type 316 stainless steel with sleek low-profile styling. Easy bolt-in installation. Mounting hardware included. Wall thickness: 0. 060". 20mm x 40mm dia.
Part No: F27-1608P12-1
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Stainless-Steel Ellipti-Rail Grab Rails
Ergonomically designed elliptical handrails are made of mirror polished marine-grade type 316 stainless steel with sleek low-profile styling. Easy bolt-in installation. Mounting hardware included. Wall thickness: 0. 060". 20mm x 40mm dia.
Part No: F27-1608P24-1
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Stainless-Steel Ellipti-Rail Grab Rails
Ergonomically designed elliptical handrails are made of mirror polished marine-grade type 316 stainless steel with sleek low-profile styling. Easy bolt-in installation. Mounting hardware included. Wall thickness: 0. 060". 20mm x 40mm dia.
Part No: F27-1608P30-1
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Stainless-Steel Ellipti-Rail Grab Rails
Ergonomically designed elliptical handrails are made of mirror polished marine-grade type 316 stainless steel with sleek low-profile styling. Easy bolt-in installation. Mounting hardware included. Wall thickness: 0. 060". 20mm x 40mm dia.
Part No: F27-1608P36-1
|
|
![Stainless Steel End-In Blend Base for 7/8" OD Tube from SUNCOR]( "Stainless Steel End-In Blend Base for 7/8\" OD Tube from SUNCOR")
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail
Precision cast 316 Stainless Steel. 5. 5º angle. 7/8" ID. Overall length 6". Mounting hole distance 1. 60". Requires two #10 fasteners. Sold Individually. Includes set screws (uses 1/8" allen key).
Part No: C3677-0055
|
|
|
|
Requires 2 9015-G gaskets per plate.
Part No: 8124
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Flag Accessories
Stainless steel flagstaffs always look grand Quality stainless-steel flag poles clamp or socket mount to fly your colors. Lengths from 18" to 48. " An excellent non-corroding staff for displaying ensigns, courtesy flags and more.
|
|
|
|
Home -> Paint & Maintenance -> Tools -> Tool Kits
Six-piece set features screwdrivers with drop-forged, corrosion-resistant, stainless steel shafts. Buoyant handles are bright-colored for visibility and their large size affords a comfortable grip. Includes three Phillips: #0 x 3", #1 x 3", #2 x 4" and three slotted: 5/32" x 3", 3/16" x 3", 1/4" x 4".
Part No: 10190841
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrub Brush Kits, Accessories->Fishing Accessories
Convert your deck brush to a gaff hook or fishing netNets have treated nylon netting. Stainless-steel Gaff Hook includes stainless spring guard and is designed for light use only.
Part No: 1804
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Stainless-Steel Gas Struts for Dock Boxes & Hatches
Made of corrosion resistant 316 stainless steel for extended service in demanding marine environments. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1894-10
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Galley Accessories
Rectangualr flat box grater keeps grated foods from scatteringComes with 4 stainless steel blades.
Part No: HG-84
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail
This stainless steel handrail has a formed end. Depth 1-1/4" . Width 2".
Part No: 74218
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail
Provides a finished look to hatches and doorsPolished Marine Grade 316 stainless steel. Drilled & countersunk for #6 screws on 2” centers.
Part No: S11-4680P6-1
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories
Protect your hatches from the elements! Polished 304 stainless steel cover trim for hatches will help prevent your hatches from forming mildew or discoloring. It will give them a clean, finished look. 1-1/4"W x 6'L. Predrilled for #6 screws (not included).
Part No: S11-4660P6-1
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks
Precision Cast 316 Stainless Steel. Overall length 10". Hole to hole dimensions 3. 63" x 1. 75". Requires 1/4" fasteners (not included).
Part No: C3110-0000
|
|
|
|
Home -> Electronics -> Boat Instruments->DST1000 Depth/Speed/Temperature Transducer
Maretron’s DST100 Smart™ Retractable Depth/ Speed/Temperature Transducer, delivers precise digital depth, accurate speed and exact water temperature even at speeds above 40 knots — all with no programming or calibration necessary. The DST100 measures precise water depth at 0. 4m to 60m with a wide beam width and is tolerant to most deadrise angles. At 235kHz it can be used with a fishfinder as an ideal navigation tool for sport or commercial fishing vessels—or with sailing vessels of all sizes.
Part No: M33-495-01
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Power Mount & Power Mount Plus Accessories
*Universal mounts fit Furuno, JRC/Northstar, Koden, Lowrance, Sitex, Simrad, Nobeltec, Maptech 12–20" domes and 24" Lowrance domes.
Part No: LTB-100SS
|
|
|
|
Home -> Sailboat -> Rigging Products
Stainless steel rod stock with three attachment holes for fasteners.
Part No: 960012
|
|
|
|
Stainless-steel locknut, package of 5 (1/4"--28).
Part No: 18-3722-9
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails
Ronstan pad eyes and saddles suit a range of load requirements. They are available in bolt-through or bolt/screw-down styles.
Part No: RF87
|
|
|
|
Don't replace your complete snubber, try our replacement glass rings, stainless steel rings with our 316 stainless snap or our nickel plated brass snaps to repair your snubber.
Part No: 88667
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Locks
High-security lock offers superior corrosion resistance for the marine environment.
Part No: 89511
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Pivot Lock Hitch Pins
Easy to install and take off because they rotate and lock in both directions.
Part No: 1465DAT
|
|
|
