Top Sellers
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Stainless-Steel Rub Rail, End, 1"H x 12"L; Requires #8 Screws from TACO PRODUCTS
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.
|
316 Stainless-Steel Hose Clamp, 7/16" to 11/16", SAE Size 3 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
|
Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
|
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
|
Snap Hook, 4"L, 3300lb. Breaking Strength from WICHARD
Drop-forged from 316L stainless steel for outstanding strength.
|
|
|
Fastpin, 3/8 D X 1.5 SS from SCHAEFER
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
|
|
|
1"W x 8"L Tang from SCHAEFER
High-quality stainless steel tumbled and polished.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
|
Stainless-Steel Cupple, Stainless-Steel 16A
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel “S” Hooks
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
Part No: C0178-0003-W
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel “S” Hooks
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
Part No: C0178-0005-W
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Built to last for years in the marine environment.
Part No: 20200
|
|
|
|
Home -> Electrical -> Shore Power
Rear safety enclosure with strain relief Soft Touch cap design Easy Lock System 316 Stainless steel 50 Hz Power Inlet 16 AMP (30A)/220 Volts Manufacturer's Documentation Marinco Inlet Installation Guide.
Part No: 303SSEL-BXPK
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Polished stainless steel housing with butyl rubber diaphragm provides maximum corrosion resistance. Easy to install and maintain, this 2gal. capacity tank maintains consistent water pressure and temperature. Reduces pump cycling. Pre-charged to 20psi. Includes mounting feet for easy installation and a mounting bracket to accommodate any type of Shurflo water pump. Material: Stainless steel with butyl rubber diaphragm . . Pressure: 100psi . Port Sizes: 1/2" NPT female .
Part No: 3400-002
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Anchor Deck Chocks
High-quality chocks mount on deck to hold conventional (not Fortress) pivoting fluke anchors weighing 8–20lb.
Part No: S-0143S
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware
For greater strength, use one size larger than your chain. Made of 316 stainless steel for maximum corrosion protection. Oversize screw pin adds security to your anchor connections, and can be wired to prevent accidental opening. Mfr. 's lifetime limited warranty. Ship 0.
Part No: C0116-FS13
|
|
|
|
Home -> Seating & Covers -> Seating
Cover up old oxidized pedestal bases. These highly polished stainless-steel pedestal base covers fit over your old existing pedestals to give them that “better than new” look. 9" and 12" sizes will fit existing 2 7/8" dia. and 3 1/2" dia.
Part No: 2004-SP12
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: SS-76-B
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: SS-76-C
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: SS-85-G
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: SS-85-H
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: SS-69-B
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: SS-69-C
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->One-Mile Sidelights
Designed to mount on the foredeck or any flat surface of powerboats to 12m. Lights have 1nm visibility. Polycarbonate lenses. Accept #90 (7. 5W) lamps. Stainless model uses an 8W lamp. Bases are predrilled with two countersunk holes. Die-cast Zamak model has a Perma-Plate chrome finish. Volts: 12V . Draw: 0. 62A .
Part No: 66318-7
|
|
|
|
Stainless steel knob for Edson wheel brake For Edson wheel pedestal brakes, a highly-polished, stainless-steel brake knob to directly replace Edson’s plastic model.
Part No: 825ST-1
|
|
|
|
Home -> Electrical -> Shore Power -> Phone & TV Wiring
316 Stainless steel with locking waterproof cap. Soft Touch cap design.
Part No: TV6592
|
|
|
|
Home -> Sailboat -> Tiller & Rudder
316 investment cast product Easy installation Watertight ‘O’ ring seal Easy operation via winch handle Adjustable deck thickness.
Part No: 89400061
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
Part No: 10001
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes
Excellent for use in the marine environment. Totally sealed sound units have type 304 stainless cover, diaphragm and mounting brackets . Maximum amp draw: 3 Amps. dB(A) rating: 106 at one meter. Fundamental frequency: 440±20.
Part No: 10035
|
|
|
|
Home -> Cordage -> Rigging Products->Cupples
.
Part No: N640-M07
|
|
|
|
|
Home -> Cordage -> Rigging Products->Cupples
Electro-polished 316 stainless steel.
Part No: N640-M04
|
|
|
|
|
Home -> Cordage -> Rigging Products->Cupples
.
Part No: N640-M05
|
|
|
|
|
Home -> Cordage -> Rigging Products->Cupples
.
Part No: N640-M12
|
|
|
|
|
Home -> Cordage -> Rigging Products->Cupples
.
Part No: N640-M06
|
|
|
|
Home -> Engine Systems -> Steering Systems
This stainless-steel steering wheel has an oval shaped 15" diameter rim provides easy gripping. Solid stainless center cap, for Morse and Teleflex steering systems. Non magnetic––will not alter compass readings. Five spokes. Rim Diameter: 15". Rim Material: Stainless Steel. Spokes: Five. Dish: 10°.
Part No: WM1721521
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking
Corrosion-resistant stainless-steel dock nails are the ideal fasteners for permanently mounted bumpers, dinghy guards, gunnel guards and other applications where regular nails fail due to rust and corrosion. 1/2lb.
Part No: 95999
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Compact Docking Lights
Compact lights will illuminate your dock, an unfamiliar mooring area or assist in night-time navigation. Because the lights are hull mounted there is no reflection from rails or deck mounted hardware. 50W halogen lamps and heat-resistant Lexan lenses provide excellent illumination. Lamps can be easily accessed for fast replacement. White plastic housings with gaskets are durable, watertight, and easy to install. Lamps angle 24° and draw just 4. 2A . 25"W x 7. 75" L and 3.
Part No: 85104-7
|
|
|
|
Home -> Electrical -> Shore Power->15Amp, 125V Straight Blade Components
High-grade, marine-quality and corrosion-resistant. Two-pole, 3-conductor, grounding devices.
Part No: 93101
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories
The "one-way" locking peg provides secure and reliable mounting and allows the use of up to 1/2" diameter line.
Part No: 1001
|
|
|
