Top Sellers
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
|
|
5/16" BBB Chain, 1900lb. SWL, 7600lb. Breaking Strength, 1.2lb./ft., 550' Standard Pack from ACCO CHAIN
Bulk Chain We stock a complete selection of I. standard chain from Acco to fit almost any windlass. chain vendors. When comparing Acco chain to other brands, be sure to ask if other models are “hot-dip. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. BBB is made of low-carbon steel, but has shorter, calibrated links that are designed to be compatible with many windlasses.
|
|
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
|
7/16" G40 Chain, 7200lb. SWL, 21,600lb. Breaking Strength, 2.05lb./ft., 300' Standard Pack from ACCO CHAIN
Hot-Dipped galvanized Grade 40 HT Acco anchor chain! An industry standard, hot-galvanized, high-tensile anchor chain combines both high tensile strength and is resistance to wear. Meets ISO standards . Calibrated to ensure the proper fit for your windlass. 7200 lbs.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Replacement Delrin Roller, 3" Dia., 3-3/8" Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
|
from AFTCO, SWL from HARKEN, Standard 3, SWL from SCHAEFER, 10" from LEWMAR
|
|
Home -> Fishing -> Fishing Accessories -> Fishing Belts
The ultimate fighting belt! Line Weight- 20-50LB Aftco Fighting Belt is designed to be the ultimate fighting belt with it's advanced design, materials and comfort. Co-molded to the foam back pad is a heavy-duty, yet lightweight gold-anodized, stamped aluminum front plate. Super durable, it features posts at each side that accept unique Quick Clips, which "snap" the two piece belt straps (or optional drop straps) in place for quickly getting into or out of the belt.
Part No: BELT3GOLD
|
|
|
|
Home -> Sailboat -> Blocks
Stand-Up base fits the head post of Series 50 blocks for added versatility. Diamond shape base measures 2" x 3" . Pin diameter: 3/16". MWL: 1100lb.
Part No: RF2450
|
|
![Stand-Up Boot, Fits 40/57mm Carbo/Black Magic Blocks from HARKEN]( "Stand-Up Boot, Fits 40/57mm Carbo/Black Magic Blocks from HARKEN")
|
|
Home -> Sailboat -> Blocks->Block Accessories
Ball-and-socket bases allow blocks to articulate so they lead fairly from any direction to any direction. Stanchion base mounts to any 7/8" or 1"dia. stanchion .
Part No: 369
|
|
![Stand-Up Boot, Fits 75mm Carbo Blocks from HARKEN]( "Stand-Up Boot, Fits 75mm Carbo Blocks from HARKEN")
|
|
Home -> Sailboat -> Blocks->Block Accessories
Ball-and-socket bases allow blocks to articulate so they lead fairly from any direction to any direction. Stanchion base mounts to any 7/8" or 1"dia. stanchion .
Part No: 370
|
|
|
|
Home -> Sailboat -> Blocks -> Fairlead Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 303-72
|
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 03-72
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Car Controls
For use on offshore boats from 32’–65’. Torlon® bearings and pivoting shackles for non-vertical loads. See control line options below.
Part No: 669
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Car Controls
For use on offshore boats from 32’–65’. Torlon® bearings and pivoting shackles for non-vertical loads.
Part No: 598
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Midrange Control Black Accessories
Midrange traveler end controls allow installation of traveler purchase from 2:1 to 4:1, fastening directly to the track without extra holes in the deck.
Part No: 1561
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Car Controls
For use on offshore boats from 32’–65’. Torlon® bearings and pivoting shackles for non-vertical loads.
Part No: 1896
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Midrange Control Black Accessories
Midrange traveler end controls allow installation of traveler purchase from 2:1 to 4:1, fastening directly to the track without extra holes in the deck.
Part No: 1638
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Wheel Nuts
Necessary to fix a destroyer wheel on your existing wheel shaft. Standard model is a polished stainless hexagonal nut. Quick Release model is a 2" dia. cast stainless knurled knob, which can be removed by hand. Fit Edson standard shafts (1"-14), except 303884, which fits 3/4"-10 shafts. Each ShWt 0.
Part No: 673ST-1-14
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Dock Ladders
Heavy-duty, marine-grade aluminum ladders are constructed from 1-1/4" pipe with extruded channel steps, welded for strength. 17"W flat steps have nonskid surfaces and no sharp edges. 12" vertical spacing between steps. Standard style is for permanent mounting on a dock or seawall. Swing style has hinged steps that swing up and back allowing complete ladder to be kept out of the water. Lifting style has steps that slide up and down and lock in either position. max.
Part No: S-3
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Wheel Nuts
Necessary to fix a destroyer wheel on your existing wheel shaft. Standard model is a polished stainless hexagonal nut. Quick Release model is a 2" dia. cast stainless knurled knob, which can be removed by hand. Fit Edson standard shafts (1"-14), except 303884, which fits 3/4"-10 shafts. Each ShWt 0.
Part No: 673ST-3/4-10
|
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Dock Ladders
Heavy-duty, marine-grade aluminum ladders are constructed from 1-1/4" pipe with extruded channel steps, welded for strength. 17"W flat steps have nonskid surfaces and no sharp edges. 12" vertical spacing between steps. Standard style is for permanent mounting on a dock or seawall. Swing style has hinged steps that swing up and back allowing complete ladder to be kept out of the water. Lifting style has steps that slide up and down and lock in either position. max.
Part No: S-4WS
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Corrosion-resistant construction, each fuse tested twice to ensure the highest quality. 20 Design Amps. 5 Enclosed glass tube designed for safety. 1/4" diameter x 5/8" long.
Part No: 604200
|
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Dock Ladders
Heavy-duty, marine-grade aluminum ladders are constructed from 1-1/4" pipe with extruded channel steps, welded for strength. 17"W flat steps have nonskid surfaces and no sharp edges. 12" vertical spacing between steps. Standard style is for permanent mounting on a dock or seawall. Swing style has hinged steps that swing up and back allowing complete ladder to be kept out of the water. Lifting style has steps that slide up and down and lock in either position. max.
Part No: S-5
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Water Puppy Flexible Impeller Pumps
Self-priming pump can be located above the fluid source and can lift it up to 4'Bronze pump head resists corrosion, and bronze body features a reusable O-ring-type end-cover seal. Complies with USCG 183. 410 and ISO 8846 (ignition protection). Application: Bilge pump, livewell circulation, washdown, general pumping requirements . GPM: 6. 3 (fwd), 7. 8 (reverse) . Self-Prime: 4 ft. dry suction (self-priming) lift, 20 ft. lift when primed . Material: Bronze body, neoprene impeller .
Part No: 18660-0121
|
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Dock Ladders
Heavy-duty, marine-grade aluminum ladders are constructed from 1-1/4" pipe with extruded channel steps, welded for strength. 17"W flat steps have nonskid surfaces and no sharp edges. 12" vertical spacing between steps. Standard style is for permanent mounting on a dock or seawall. Swing style has hinged steps that swing up and back allowing complete ladder to be kept out of the water. Lifting style has steps that slide up and down and lock in either position. max.
Part No: S-7
|
|
|
|
Home -> Sailboat -> Winches->Winch Handles
Outstanding grip design incorporates ball bearings for fast, free spinning and cranking. Will fit most common winches built today. Grip: Ball-bearing single . Type: Standard .
Part No: 29141110
|
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->Winch Handles
Outstanding grip design incorporates ball bearings for fast, free spinning and cranking. Will fit most common winches built today. Grip: Ball-bearing single . Type: Standard .
Part No: 29141010
|
|
|
|
Home -> Fishing -> Tackle Boxes & Lures -> Soft Tackle Boxes
A roomy daypack for school or travel Quality daypack has two large compartments for books or extra layers, and additional compartments to organize your essentials.
Part No: CBP-STD
|
|
|
|
Home -> Interior, Flags & Gifts -> Clocks, Barometers, & Lamps->Brass Yacht Lamps
A perennial bestseller and a classic gift for admirers of maritime traditions Expect a lifetime of warm light from these finely crafted, solidly built brass yacht lamps with a century-old tradition of practical use. An “S” hook allows overhead attachment for bright cabin illumination. Uses liquid paraffin fuel, which burns without soot or odor. Wick is controlled by a unique outer adjustment. Fuel: Lamp oil. Burn Time: Standard Lamp - Approx. 30 hrs. ; Small Lamp - Approx.
Part No: 700
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Black cable ties have UV inhibitors added for extended protection and longer life.
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Filters & Chemicals->Boji Water Softener
Softens your water supply, yielding water that tastes fresher, is less corrosive to onboard plumbing and leaves fewer unsightly stains and water spots. Consists of a PVC cylinder containing a special Ion Exchange Resin that attracts hard substances in water (iron, calcium, etc. Complete kit includes the Boji Softener, a prefilter housing with activated carbon filter, 36" hose to connect Boji to prefilter, 3/4" hose fittings to plumb into water supply and molded integral feet.
Part No: SS4015
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Forged “D” Shackles
Ronstan D shackles are strong, reliable, and economical. Choose between a variety of styles below. Standard D shackles with slotted pin or loose pin. Wide D shackles.
Part No: RF151
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Low Amperage Distribution->Standard DualBus 100A
Contains negative and positive circuits on one block. Two tin-plated copper bus bars with #8-32 terminal screws. Terminal Material and Size: Stainless Steel, #8-32 . DC Rating: 100A@48V . AC Rating: 100A@300V . Base Material: ABS . Insulating Cover Available: Yes; sold separately .
Part No: 2702
|
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Low Amperage Distribution->Standard DualBus 100A
Contains negative and positive circuits on one block. Two tin-plated copper bus bars with #8-32 terminal screws. Terminal Material and Size: Stainless Steel, #8-32 . DC Rating: 100A@48V . AC Rating: 100A@300V . Base Material: ABS . Insulating Cover Available: Yes; sold separately .
Part No: 2701
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->Echomaster Radar Reflectors
Giving ships a chance to see you when fog and poor visibility obscure your boatThese 12 1/2" dia. All models can be stored flat and assemble in minutes. Plates are held together by tough, injection molded corner latches. Assembled reflectors include a 1 1/4" (32mm) windage hole for reduced aerodynamic drag, which also allows for backstay mounting. 6 GHz X or 3cm radar band. Assemble around a backstay or make your own bridle and hang from holes that are drilled in the corner latches.
Part No: 152
|
|
|
|
Home -> Electrical -> Interior Lighting->Classic Fluorescent Lights
Fluorescent lights last longer, conserve battery power These fluorescent lights feature corrosion-resistant housings, low power draw, high light output and low cost. They run much cooler and are three times more efficient than halogen bulbs. Woodgrain lights help preserve the look of your boat as direct replacements for older lights. Standard fluorescent bulbs included. Light Style: Fluorescent overhead light . Volts: 12V . Mounting Hardware Included/Required: Stainless fasteners included .
Part No: EF16RW
|
|
|
