Top Sellers
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
Trim Tab Zinc Anode from CANADA METALS
Attaches to standard Bennett trim tabs where actuator bolts to plate.
|
Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
|
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
|
x 1 3, x 2 3, x 2 1, 8"L from CANADA METALS, x 3 5, CMX00 from CANADA METALS, 1
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX13S
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX13
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX01
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX30S
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX35
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX40S
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX50S
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX02
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX00
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX25
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX30
|
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Zinc Streamlined Collar Anodes
Canada Metal zincs are composed of an alloy that meets Mil-Spec MIL-A-18001 for sacrificial anodes. This alloy is mostly zinc, but with measurable concentrations of cadmium (~0. 1%) and aluminum (~0. 25%). The additional cadmium causes the anode to erode from the surface inward, which causes a ''sandblasted'' appearance to the surface.
Part No: CMX40
|
|
|
|
Home -> Electronics -> Global Positioning Systems->Accessory Packs
Assorted Garmin Accessory Packs.
Part No: 010-10613-00
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106474
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106476
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106472
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106473
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106201
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106203
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106205
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106198
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106199
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stren Fishing Line
Stren Fishing Line Stren is preferred by knowledgeable fishermen who want the very best line on their spinning, casting, or trolling reel!.
Part No: 1106200
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line
The easiest docking you've ever done! The 4' Stretch 'N Slide dock line stretches to 8' long and has 7 individual loops, so you'll always have the perfect length for easy tie up. Secures your boat to the dock in seconds.
Part No: SNS-B
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
Top ID: 4 5/16"; Spout OD: 1/2"; Spout length 8 1/8".
Part No: 99W 3595
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Strike Plate - Perko.
Part No: 0912DP0CHR
|
|
|
|
Home -> Fishing -> Fishing Accessories->Gunnel Mount Striker Bases
Attractive strike bases lock into 12 positions with hex nut design. Manufactured using marine grade cast 316 stainless steel. Arms are ambidextrous and will fit both port and starboard bases. Removable to keep your deck unobstructed . Compatible with Lee, Perko and Rupp outriggers . The Complete Gunnel Mount Tele-Outrigger systems include a 1/8" Striker Base, 15' outrigger, and outrigger kit. Mfr.
Part No: BP-212-F-1
|
|
|
|
No. 240 Striker - Designed for Muskie, Halibut and All other Big Game Fish New Stainless steel reinforced post, with lock/unlock ring. . Inner support rotates with the rod to instantly remove and "strike" simultaneously. . Complete with No. 241 side/deck mount, stainless steel supports and fastenings. Material: Glass-reinforced Nylon. Length: 12-1/2". Diameter: 1-3/8".
Part No: 240
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Stringer Sunglasses
These co-injected cold-molded sunglasses feature the best polarized lenses, letting you see his every move. Hinge: Integral. Lens Size: MS. Frame Fit: S. Patented vented temples (Patent D557324). Rx-able. Frames: Shiny Black, Shiny Tortoise. Lenses: 580 Glass - Blue Mirror, Green Mirror 400 Glass - Blue Mirror, Green Mirror . Costa Del Mar Lenses 580TM Lenses Yellow light is the enemy. It's hard for the eye to process and changes how you see the world. Not with a pair of 580s on.
Part No: -
|
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories
These co-injected cold-molded sunglasses feature the best polarized lenses, letting you see his every move. Hinge: Integral. Lens Size: MS. Frame Fit: S. Patented vented temples (Patent D557324). Rx-able. Frames: Shiny Black, Shiny Tortoise. Lenses: 580 Glass - Blue Mirror, Green Mirror 400 Glass - Blue Mirror, Green Mirror . Costa Del Mar Lenses 580TM Lenses Yellow light is the enemy. It's hard for the eye to process and changes how you see the world. Not with a pair of 580s on.
Part No: -
|
|
|
